Impossible to find a J2SE SDK installed to the path: < ECLIPSE_INSTALL_PATH > \jre6

Similar Questions

• From JDeveloper fails with an error "cannot find a J2SE SDK installed to the path... »

  I just downloaded 11.1.1.7 Setup for JDev. After installation, I try to configure the JAVA_HOME path.

  However, when I start JDev I wonder "Please specify the path to the JDK Java House... »

  If I (C:\Program Files (x86)\Java\jre7\bin\java.exe - Java 7, version 51) I get an error message "could not find a J2SE SDK installed in the path c:\Program Files (x 86) \Java\jre7." and JDev ends.)

  What can I do to fix this? Thank you.

  The specified path seems to be a path of a Java JRE but not a path to a Java SDK. JDeveloper needs a complete Java SDK (e.g. JDK) but not only a JRE.

  Dimitar

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  Runs as an administrator.

  I'm administrator of my PC with Windows 7 64 bit.

  Installed the Java jdk-8u11-windows - x 64 .exe.

  You're VERY close - just remove the part "\bin".

• Cannot find a J2SE SDK installed

  Hello

  I installed SQL Dev 3.2.2 and when to run. I am asked to show java.exe.

  Then I go to C:\Program Files (x86)\Java\jre7\bin\java.exe

  I get the error message:

  Could not find an installed J2SE SDK.

  Any solution?

  Thank you.

  You can read in the 3.2.2 release notes:

  • JDK support
    • Oracle SQL Developer 3.2 version comes with JDK 1.6.0_35. You can use the JDK download embedded or to connect to an installed JDK. Developer SQL supports a java version minimum of to a maximum java version 1.6.0_04 less than 1.7.

  If you use the JDK 1.6 or

  install the SQL Developer 4.0 version, it works with 1.7

• Illustrator, damaged, impossible to find a way to install again

  Cannot open the application "Adobe Illustrator.app" because it may be damaged or incomplete.

  So I uninstall it, but I don't know how to install it again.

  Himl Ka,

  You should be able to install again in the same way.

  I think it would be better to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  The cleaning tool works for all versions of CS3 on (you can see the top of the page).

• 2.2 SDK install with the existing signature tool

  Hi all

  I just installed the SDK software WebWorks 2.2 on my machine that had already been recorded for signature tool.  When I run the 2.2 bbwp process and add the key to existing signature tool, is not through the package manager process.

  [ERROR]                 Cannot sign the application - could not find signature keys

  Anyone know what I should do in this case?

  Is there a way I can use existing signature files or what I have to redo the entire signature process?

  Any help is very appreciated!

  Please read the docs here - https://bdsc.webapps.blackberry.com/html5/documentation/ww_publishing/signing_your_ww_smartphone_app...

  See the section "after an SDK upgrade.

• Impossible to find battery car or photoshop on the tools.

  Hello

  I have CS5 Production Premium, and while in Bridge, I try to call the auto battery function to group the RAW photos I took for merging HDR in PS. problem is, there is no auto battery service avialable, and there is no option under Tools photoshop avialbale. I checked that the automatic collection startup script is enabled in the preferences, but this makes no difference.

  What I missed, or what should I do to enable these functions to appear?

  Thank you

  Geoff

  I don't think photoshop under Tools option and no automatic stacking under battery options are related.

  Because it's pretty weird I would reset the Bridge preferences.  Close the bridge and then hold down the Ctrl Key and launch Bridge.  You should get a window to reset with 3 options.

• When x 64 SDDM says "could not find an installed J2SE SDK to...» "what is actually sought?

  First of all, please forgive me if this question has been answered before, but research in this new forum facilities are even more waste than the former, which is a feat that I thought not possible.

  Anyhoo.

  I downloaded the 64-bit version of the data modeling software, which comes without JRE.

  I installed JDK1.3.0.21.  Subsequently, I also downloaded and installed JRE 1.7u21.  However when I run datamodellerx64.exe for the first time he rushes with this message: "cannot find a J2SE SDK installed in C:\Program Files\Java\jdk1.7.0_21\bin.     She also doesn't like C:\Program Files\Java\jre7\bin (to the title of the JDK installation) or. C:\Program Files (x 86) \Java\jre7\bin (the JRE installation)

  So which way really does?

  I guess I could download and install the 32-bit version with integrated JRE but it would be a pretty sorry workaround solution.

  Cheers, APC

  Post edited by: APC - just realised I had typed "with the JRE' instead of 'without', which is actually the whole source of the number.  DOH!

  Hello

  Maker of data "with JRE" version includes only a 32-bit version, so if you want to run the Modeler data in 64-bit mode (using datamodeler64.exe in the folder datamodeler), you must provide your own 64-bit Java JDK.  It must be a JDK instead of a JRE.

  The first time you start Modeler data, it must invite for the Java House.  You must select the java.exe file in a Java JDK jre\bin folder.

  You can get it to ask once again by removing the line SetJavaHome to the datamodeler64.conf file in the datamodeler\datamodeler\bin folder.  (Mode 32-bit, you must update the file datamodeler.conf instead.)

  David

• How to find a point of intersection between two paths in the hierarchy? (2 G 11)

  Hi all!

  I need your help to write a hierarchical query.

  Suppose that we have a table hierarchycal as

  WITH h AS (SELECT 0 AS rn, to_number(NULL) AS prn, 'root' AS point_name   FROM dual
  UNION SELECT 1 AS rn, 0 AS prn, 'a' AS point_name  FROM dual
  UNION SELECT 2 AS rn, 1 AS prn, 'b' AS point_name  FROM dual
  UNION SELECT 3 AS rn, 1 AS prn, 'c' AS point_name  FROM dual
  UNION SELECT 4 AS rn, 2 AS prn, 'd' AS point_name  FROM dual
  UNION SELECT 5 AS rn, 3 AS prn, 'e' AS point_name  FROM dual
  UNION SELECT 6 AS rn, 2 AS prn, 'f' AS point_name  FROM dual
  UNION SELECT 7 AS rn, 3 AS prn, 'g' AS point_name  FROM dual
  UNION SELECT 8 AS rn, 6 AS prn, 'h' AS point_name  FROM dual
  UNION SELECT 9 AS rn, 5 AS prn, 'i' AS point_name  FROM dual
  UNION SELECT 10 AS rn, 7 AS prn, 'j' AS point_name  FROM dual
  UNION SELECT 11 AS rn, 10 AS prn, 'k' AS point_name  FROM dual)
  SELECT h.* 
  FROM h 
  CONNECT BY PRIOR h.rn=h.prn
  START WITH h.prn IS NULL
  

  I chose a single line, with rn = 11 for example, as a "starting point." After that I need to select one or more rows in this table under certain conditions. Whether rn = 8 and 9, for example. By the same query, to the next step, for each point that I chose by condition, I need to calculate, how far is it to the "starting point".

  I think, I need to find a point of intersection of the path from the root to the selected point along the same path of the "starting point". By comparing this tip I'll can understand which of them is closer to the "start".

  The only thing that I have arrived, it's trying to compare the results of sys_connect_by_path...

  Hello

  This indicates to what extent each of the nodes 'interest' are from the node of "start":

  WITH connect_by_results AS

  (

  SELECT CONNECT_BY_ROOT rn: the NURSE

  CONNECT_BY_ROOT SUBSTR (point_name,

  1

  8

  ) AS node_type

  rn AS ancestor

  LEVEL AS lvl

  H

  START WITH point_name = 'start '.

  OR point_name LIKE '% interest '.

  Rn = prn PRIOR CONNECTION

  )

  SELECT i.rn

  , MIN (i.lvl + s.lvl) - 2 AS distance

  Connect_by_results I have

  JOIN connect_by_results s ON s.ancestor = i.ancestor

  WHERE s.node_type = 'start '.

  AND i.node_type = 'interest '.

  GROUP BY i.rn

  ORDER BY i.rn

  ;

  Exit: (from your sample data, where 11 is the starting node):

  DISTANCE OF RN

  ---- --------

  8        7

  9        5

  14 3

• Try to reinstall osx to sell the macbook pro, but when it starts to install I get a window saying 'impossible to find information about this installation machine' "contact applecare".

  I erased from my hard drive to sell the macbook pro to my father.  "" When I go to install OSX I am invited to install OS X El Capitan and it will check computer and a window pops up saying 'Impossible to find information about this installation machine' "contact AppleCare.  I have an APPT with the Apple store Monday, but was hoping I could fix myself first.  Anyone have any ideas?

  When you disassemble a machine for sale, the only Mac OS X can be installed without providing WHAT YOUR Apple ID is the original version it comes with.

  You can not install ElCapitan in this situation, what is left as an exercise for the buyer.

• Suddenly, my sound card does not work - try the devices and add/install the old hardware on the Assistant Manager, he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10

  tried the Device Manager and add/install the old hardware on the wizard... he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10

  Restore the system to then it was working properly.

• Satellite L300D - impossible to find HWsetup, boot from the CD

  I have a big problem with my laptop.

  Sound on windows xp, I formatted it. All is well now. I wanted to install windows 7, I bought at the store.

  I try to install it but the laptop won't boot from the cd. I'm trying to get into the bios, no way to get... I try f2, f4, f8, f12, esc at the beginning that nothing worked. Ive was searching the Internet for more than 8 hours now and apparently I need HWSetup to use my BIOS. No problem, I got it I install on USB (Vista version). When I try to see the priority boot sequence, its empty, I don't see anything. I try to default restor it build a sequence, I moved cd ROM. upward. Reboot, do not work. I see hwsetup and sequence disapeard even once, I tried like time 5 did not work.

  I though that it was because it's the version of vista and I am using windows xp now, so I tried to find the HWSETUP for windows xp and guess what, IMPOSSIBLE to find. After a few hours trying, I decided to post here.

  So it is impossible to boot to my cd Oh and yes my cd drive works fine.

  Please help me!

  Hi ranmyus,

  Hwsetup you can download from the official website of Toshiba if you search through Satellite L300D and Windows XP. For Windows XP, but it is called utilities and * not * HWsetup:
  http://EU.computers.Toshiba-Europe.com

  As far as I know, you can change the boot order in the BIOS if you press the F2 key.
  In addition the start menu you can access when you press the F12 key after you have turned on the computer.

  It works when you connect an external keyboard?

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

  Event ID error msg:

  Log name: Application
  Source: Microsoft smart card CSP
  Date: 2010-06-29 22:25:22
  Event ID: 0
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Acer
  Description:
  The description for event ID 0 in source Microsoft smart card CSP is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

  the message resource is present, but the message is not in the string/message table

  Title: event ID of origin 0

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      0
      2
      0
      0 x 80000000000000
     
      68716
      Application
      Acer
     
   
   
      SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.
  
   
  

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Vista Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.