RegisterMetadataDBRepository running from WLST fails with an error

Similar Questions

• From JDeveloper fails with an error "cannot find a J2SE SDK installed to the path... »

  I just downloaded 11.1.1.7 Setup for JDev. After installation, I try to configure the JAVA_HOME path.

  However, when I start JDev I wonder "Please specify the path to the JDK Java House... »

  If I (C:\Program Files (x86)\Java\jre7\bin\java.exe - Java 7, version 51) I get an error message "could not find a J2SE SDK installed in the path c:\Program Files (x 86) \Java\jre7." and JDev ends.)

  What can I do to fix this? Thank you.

  The specified path seems to be a path of a Java JRE but not a path to a Java SDK. JDeveloper needs a complete Java SDK (e.g. JDK) but not only a JRE.

  Dimitar

• Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

  Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

  Thank you

  el_abuelo

  Hello El_Abuelo,

  I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

  If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

  Thank you for making the point about your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• in vCenter 6.0 'Run Stimulus Plan' failed with the following error.

  Hello

  I am new to this forum and sorry for the mistakes

  I have two site, a vcenter-hq (HQ) and another vcenter-dr (disaster).

  I use SRM, almost everything works fine except one thing.

  When I try the vcenter-TA to execute the recovery plan I get error (recovery rest also works very well):

  'Run stimulus plan' failed with the following error message.

  faultCode:Server.Processing faultString:'

  An error has occurred during serialization server response (s).' faultDetail: 'null '.

  However, vcenter-Dominican Republic to vcenter-hq it works fine

  (See pictures attached)

  

  

  

  

  

  reinstalling the recovery helped Sire Manager!

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

  Hi all

  The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key.  Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
  I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.

  Hi Vincentand welcome to the VMware communities!

  This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry.  Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?

  See you soon,.

  --

  Darius

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• KB973687 & KB923561 fail with 0xf00b0004 error

  I have 2 updates that fail with the error 0xf00b0004.  I use a WSUS server to update my clients and updates have been installed successfully in 13 other PCs.  The clients are running XP Professional.  Updates fail and their error messages are below:

  -KB973687: Installation failure: Windows failed to install the following update with error 0xf00b0004: update for Windows XP (KB973687).

  -KB923561: Installation failure: Windows failed to install the following update with error 0xf00b0004: Security Update for Windows XP (KB923561).

  I don't know what means the error 0xf00b0004.  Any advice will be appreciated...

  Hi Findingo97,

  You can reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not; I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  If this does not help then try to install updates manually, here are the links where you can download updates.

  Update for Windows XP (KB973687) (32-bit)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b643267-9116-4258-A53A-5a41426dcbcb&displaylang=en

  Update for Windows XP x 64 Edition (KB973687)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4bdcdabe-f1fb-4465-ACC3-1db8a5b19491&displaylang=en

  Update for Windows XP (KB923561) (32-bit) security

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=50a8519a-503e-43dd-A78A-c1bc764fd213&displaylang=en

  Update security for Windows XP x 64 Edition (KB923561)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8133d58d-CA11-4f24-81EC-1766cd6cd3b2&displaylang=en

  Note: Download the correct version of the update.

  Before installing the updates put the clean boot computer and continue the installation. To put the computer in a clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing the updates, follow step 7 to start the computer in normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• CallExtractFiles failed with the error 0x8007007e.

  I get the following when Truing error to run Microsoft Update: [error number: 0x8007007E]

  My windowsupdate log has the following entries:

  Notifications of recommended is disabled.
  2012-10-27 23:43:20:843 472 b5c Misc = logging initialized (build: 7.6.7600.256, tz:-0400) =.
  2012-10-27 23:43:20:843 472 Misc b5c = process: C:\Program may Explorer\IEXPLORE. EXE
  2012-10-27 23:43:20:843 472 Misc b5c = Module: C:\WINDOWS\system32\wuapi.dll
  2012-10-27 23:43:20:843 472 b5c COMAPI - COMAPI: IUpdateServiceManager::AddService -.
  2012-10-27 23:43:20:843 472 b5c COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-10-27 23:43:20:843 472 b5c COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
  27-10-2012 23:43:20:859 2012 15 b 8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
  27-10-2012 23:43:20:890 2012 15 b 8 Misc Microsoft signed: Yes
  27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: CallExtractFiles failed with the error 0x8007007e.
  27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: WU client omits CClientCallRecorder::AddService2 with the error 0x8007007e
  2012-10-27 23:43:20:890 472 b5c COMAPI WARNING: ISusInternal::AddService failed, hr = 8007007E
  2012-10-27 23:43:20:890 472 b5c COMAPI - exit code = 0x8007007E

  You have recently installed a Service Pack?

  This article mentions your error-

  http://support.Microsoft.com/kb/914232
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

  in the opposite case

  Some users have cured the problem in restoring just the c:\windows\system32\wuapi.dll
  Click Start, select run, and type: regsvr32 c:\windows\system32\wuapi.dll
  Try Windows Update

  If none of the above, perhaps this article can help you.

  http://support.Microsoft.com/kb/831429

  Windows XP stops responding when you download updates from Windows Update

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• KB2604094, 2604105, 2656409, 2686833 & 2699988 failed with the error code: 80070246.

  Original title: help with updates on Vista

  I tried for a few months, to install the following Microsoft updates recommended for my home PC which has Vista SP2. Everything I've tried fails with an error 80070246 code. Any ideas of what I should do? KB2604094, 2604105, 2656409, 2686833 & 2699988

  Hi Peppermanjim,

  You can try the following steps and check if it helps:

  Method 1:

  You can review the article and check if that helps:

  Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0 x 80070246.

  Method 2:

  You can also try to reset the Windows Update components and try to install the updates:

  How to reset the Windows Update components?

  Method 3:

  You can also try to install the stand-alone package with updates and check if it helps according to the version of Windows Vista, you use:

  For KB2604094 - a security update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2

  For KB2604105 - a security update for Microsoft .NET Framework 3.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2

  For KB2656409 - a security update for Microsoft .NET Framework 3.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2

  For KB2686833 - a security update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2

  For 2699988 - Update Cumulative for Internet Explorer 7 in Windows Vista (KB2699988) security

  For 2699988 (x 64) - a security update Cumulative for Internet Explorer 7 in Windows Vista x 64 Edition (KB2699988)

• Issue of patching: OPatch failed with the error code 1

  I'm trying to patch an AIX server which has 11.1.0 and 11.2.0.3 installed software. He has a 11.2.0.3 current database.

  I have the cd to $ORACLE_HOME/OPatch and ran lsinventory opatch command and got the following result:

  > lsinventory opatch

  OPatch Version: 11.1.0.10.2

  YES Version: 11.2.0.3.0

  The OPatch version is not applicable to the current version of YES.

  Because YES Version begins with 11.2, go to "My oracle Support" and get right O 11.2 patch . *. *. * from the patch 6880880 , version version 11.2.0.0.0 and the appropriate platform.

  OPatch failed with the error code 1

  I know that it uses incorrect opatch because when I run that opatch, it displays:

  /U01/app/Oracle/product/11.1.0/Db_1/opatch

  and it should be

  /U01/app/Oracle/product/11.2.0.3.0/Db_1/opatch

  Could someone guide me through the process of how to solve the problem please? I am new to patching

  Solved by the setting $PATH variable

• Storage vMotion fails with the error below

  I'm trying to run a virtual machine's storage vMotion. It fails with the error below.

  This method is disabled by 'moref = 17705'

  #1 method - manually remove the entry from the VCDB.

  • Stop the Service of VC.
  • Connect to the SQL Instance.
  • Run the SQL for VCDB.
  • Select * from VPX_VM WHERE name LIKE '% VM_Name % '.
  • Note the ID of VM in column 1.
  • Validate the stale entry.

  Select * from VPX_DISABLED_METHODS WHERE ENTITY_MO_ID_VAL = "vm - ID".

  • Remove obsolete entries.

  delete from VPX_DISABLED_METHODS WHERE ENTITY_MO_ID_VAL = "vm - ID"

  • Start the VC service.
  • Try Storage vMotion.

  Method #2-si this does not work, save the *.vmx file once again which will fix the problem.

  Note: To do this, you will be required to server unavailability.

  • Power off the virtual computer.
  • VM unregistered inventory.
  • Navigate to the path of the data store and VMX re-register.
  • Start the virtual computer.
  • Try Storage vMotion.

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.