From two hexagonal numbers as a variable byte in dll calls
I imported a DLL, which works well when it was called by C++ codes. However, a few screws converted did not work properly. The original functions were supposed to write a set of two hexadecimal numbers (one byte in size) to an address specified in the form of two characters. Somehow after these functions have been converted to screw, they wrote the first hexagonal number and ignore the rest. My speculation is that, given that this variable is declared as a type byte, the VIs may only take the first hexadecimal digit as a character (also a byte in size) and ignored the following hexadecimal number. Has anyone ran into similar problems?
Configure the setting in COLD LAKE to be a U8 integer instead of a string.
Tags: NI Software
Similar Questions
-
try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers...
I use a PC...
Please check Adobe - Creative Suite 5 Master Collection: System requirements and try to install the product, please let us know if you are unable to activate. You can check: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,
I hope this helps.
-
Tracing data from two locations on the block diagram on the same graph
Hello world
I'm trying to plot data from two distinct processes on a chart. These processes occur in the order.
I have developed several solutions, which none produce the result I want. What I want is for the data to trace in real time each process is running.
The two processes are functionally identical - one loop "for". With each iteration of these loops, data is produced and traced.
The data are plotted in real time, which means that each reference appears on the chart as soon as it is produced.
However, I am not able to get the second process data on the same graph in the same way.
The closest I got combines the graphic with a local variable. This allows the data for the two processes to draw in real time, but the second set of data replaces the first.
I have attached a very simple test VI showing my problem.
Any help with this would be greatly appreciated.
Thank you
You can do something like this. Is the second process just a continuation of the first? If so, it becomes even easier and you can just to keep construction of the table in the second loop.
-
I get two serial numbers when I buy ColdFusion 11 full license?
I just bought full ColdFusion 11 Standard license (no upgrade license).
The order from Adobe e-mail contains two different serial numbers, why?
This means only with a single purchase of ColdFusion 11 can I legally install, license and run on two different servers?
Or y at - it an explanation for having two serial numbers?
Hello
I suppose that a set of keys is your CF11 Standard or Enterprise and the other set of keys are for ColdFusion Builder.
HTH, Carl.
-
NIDAQmx to simulate synchronized analog input from two devices of simulations?
I would test synchronized analog input from two MFDs simulated from the NI6225. I created two devices of simulated able NI6225 & Automation (M & A) and tagged the first NI6225a and the second NI6225b. M & I created a RTSI cable configuration and added both simulated devices. However, when you call NIDAQmx C functions in my test code, I get an error condition indicating that the simulations devices are not synchronized. Before continuing, I would like firstly to confirm if NIDAQmx is designed to
simulate synchronized the analog input data of two devices of simulations. If this isn't the case, then it will explain the error condition that I have encountered in my test code.
Thank you
Ian
Hello John and Jared,
If I remember well used to support the simulated synchronized devices. I ran various tests this week, but all fail. I'm going to order/install a RTSI cable and test with physical devices.
Thanks for your help. I close this post.
Ian
-
How to tie the two serial numbers using test including the tie in the database.
I have two separate committees, I need to link the serial number too. One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database. Don't know how to do it, looking for any input I can get. Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.
I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set. Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.
-
HelloGood day.
in September 2011, I was a student at Nottingham Trent University and I bought a web Adobe CS5 premium format I used the first serial number on my first laptop, but it was stolen, so I bought a new laptop and used the second serial number on this topic, today as I fool to my laptop and I lost the two serial numbers and it is not easy to get them in the way common, because I am not a student any more I don't have a student ID. can you help me with this question means?
Thank you
concerning
Martine Hatem
Lost information - response #1 in https://forums.adobe.com/thread/2008767
-
Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.
Trying to open a corrupted catalog extracted from the software recovery but shows 0 bytes.
Hi pibo1984,
As the catalog size is 0 bytes, this means that the catalog has no inside information.
So I suggest you to please try to work with one another your backup catalog.
Kind regards
Tanuj
-
Copy the data from two rows together in a new line
Hello everyone.
I have a question for copying data from two lines together in a new third line.
See this short example:
This is the current situation. The lines STATE_1 and STATE_2 contain different information separate.
In the past data were recorded at random in one of these lines.
It's the state table:
ID Cust_id STATE_1 STATE_2 STATE_3 1 88 Customer is waiting. Call since yesterday. 2 11 Mr. Smith, no answer. Wait until December 3 11 Pls Create PO. Old PO has been cancelled 4 5 No access to the system. Now, everything must be recorded in the STATE_3 void, but I also need than the old entries from the past which must also be copied together in STATE_3
Like this:
ID Cust_id STATE_1 STATE_2 STATE_3 1 88 Customer is waiting. Call since yesterday. Customer is waiting. Call since yesterday 2 11 Mr. Smith, no answer. Wait until December. Mr. Smith, no answer. Wait until December. 3 11 Pls Create PO. Old PO has been cancelled. Pls create in. old PO was canceled. 4 5 No access to the system. No access to the system. Y at - it an SQL-easy order?
Thanks for any help.
What:
update set state_3 = state_1 State | » '|| state_2;
?
-
To find common data in 2 columns from two different tables.
Hello
Could someone help me with a querry to discover common data of 2 columns from two different tables?
Thank you
RajeshTry as below.
select col1 ,col2 from tab1 intersect select col1 ,col2 from tab2;
-
Create a swing component derived from two or more Swing components
Hello
I want to make a component reusable swing which will consist of TextField and Jbutton. Click on the the Jbutton a JFileChooser open through which the user can select a directory and the path selected will appear in the TextField.
I googled a lot but couldn't find a good article. All the article shows that stretches from one component Swing, but none no indication how to combine two or more elements in one.
Can someone please send me an article / excerpt/Code tutorial on how I can create a custom Swing component from two or more basic Swing Component.
Thank you
RohitCreate a subclass of JPanel that contains two widgets from left to right:
public FileChooserCallout extends JPanel { private JButton jbFileChooser = new JButton("Browse..."); private JLabel jlPath = new JLabel("."); public FileChooserCallout() { ... // set layout this.add(jbFileChooser); this.add(jlPath); jbFileChooser.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { ... // display file chooser, then set new path in label } }); } }
-
the analysis of data from a legacy in the form of bytes bluetooth
Hi, Iam execution of java for MYGlucoHealth code monitor. I have to catch the bluetooth through my application data and analyze format. (later I store in the SQLite database). But according to the specification of the Protocol had, I do not understand how to read and analyze. I know how to pair the device to my request. But I do not know how to parse the bytes of data according to the Protocol of the device specification.
Can someone tell me how to do this. All done with this kind of coding?
Thnaks in advance,
-Cissokho
Published by: 798686 on November 2, 2010 02:38798686 wrote:
Ok.. Thank youTips for the facilitator: don't double post. I've locked the new thread.
the analysis of data from a legacy in the form of bytes bluetooth
Please continue here.DB
-
Extraction of data from two tables without discounting
Hi friends,
I have a problem I want to extract data from two tables without discount in the text field when I will enter any value in a text field, then the value of corressponding must come to textfield corressponding.
for example. There are two table A and B.
Table A has Colunm
S_ID number;
C_ID Varchar2 (30);
VARCHAR2 (4) s;
Second table B Colunm name
S_ID number;
What varchar (30);
L_Name varchar (20);
When I enter in a text field then the c_id 101 s_id, dry, first_name and last_name should come to corressponding text without refresh fields.
How can I do that.
Thank you
MauryYou can use Ajax and there are tons of good examples out there for this purpose;
For example [http://apex.oracle.com/pls/otn/f?p=31517:236:1876567353842241] -
Reports from two different domains
Hi all
Is it possible to account for two different subjects areas, i.e., a report that contains fields from two different areas? If so, how could we select fields from two different disciplines in a single report of responses?
Thank you!!One thing to understand is that if you're imagining having two areas (SAs) poster and then by dragging the columns of each in your application without any preparation, then no, that cannot be done. You would need to make a join in the MDB layer and expose the column of the second subject area in the presentation layer.
But if you indeed interested in UNION (or cross) queries, then do this:
Build your first application in the first SA in the usual way. Note the number of columns and the data types of each column.
Now at the bottom of the workspace of criteria, there is a button called "Combined with application similar." Until it clicks.
Select your second. You will notice that the contours of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click result. (Oh, you need to decide what kind of combination you want - click the menu drop down.) The result will be a new application that has data from two SAs in the query and combined in the way you select (union, intersection, etc.)
This should give you a start.
They are now, some 'useful' or 'correct' points for users on this thread...
-
Hello from Firefox can be used for three or more way call or is it only from person to person?
Hello from Firefox can be used for three or more way call or is it only from person to person?
Hi awilcox Hello firefox time can only be used for a direct conversation between two people.
Maybe you are looking for
-
In addition, no trouble with iTunes and QuickTime recovery partition
T couldn't find the post I put forward...My Qosmio E series (I n know where to find that one is) had a recovery partition, as said in the title... hard disk and I got it to factory settings, and so now, it seems that he doesn t have a recovery partit
-
This machine, HP ENVY 15-k238nd is quite the internal parts. Apparently, it was an outgoing model so I got it cheap in November. GTX video card. Reasonably fast processor i5 to 5200. 8 GB of RAM. Full HD screen. Wonderful. Really. Until I connect to
-
HP ENVY spectrum XT Ultrabook: Drive failed in the short DST test
My laptop HP ENVY spectrum XT Ultrabook fails to load Windows. I ran diagnostics and got an error. Said HP diagnostic tools drive failed the short DST test with id RPLEX3-67T7HU-XD7X1F-60SL03 of the failure. Does this mean I need to replace my hard d
-
I want to build a Butterworth filter with the node of the formula. What should I do? We will do it step by step, and if you can correct me. I have seen that the formula for the Butterworth is: H (JW) = 1/sqrt ([1 + (f/CF) ^ 2N]) now, I know that the
-
Could someone explain to me in a fundamental way. How to rename channel merged in the attached VI names. By default, they read without title, Untitled_1 and so on. I want giving them a logical name as coil Temp, Temp of the battery etc... Thank you