Front mounted at the rear of the cover Panel

Similar Questions

• I cracked my apple logo in the cover Panel what can I do

  I cracked my apple logo in the cover Panel what can I do

  Invent a funny/stupid story to tell your friends when ask her why it is cracked.

• create bookmarks for the front and the back of the cover

  Go easy on me please I tried for two hours to do this simple thing! (At least, I assume it's simple).

  I try to add bookmarks to the front and the back of the cover of documents. The coverage is obviously the first page (always!) but the rear hull could be any page number, according to the document. Curiously, I did a before work for the calculation of the last page and this isn't my problem.

  In any case, of hackering autour with stuff in the javascript reference and some tutorial, I so far have this:

  var plan = this.bookmarkRoot;

  myRoot.createChild ({cName: "Front Cover", nIndex: 0});

  myRoot.createChild ({cName: "Back Cover", nIndex: 99});

  Thus, this creates two bookmarks where I need them, 'Coverage' at the beginning and the 'cover' at the end of the bookmarks already in the doc. Obviously this works only because the number of 'already' bookmarks will never exceed 99, but it seems to work ok!

  In any case, my problem is that I can't work a way to set the destination - for the life of me I'm sorry I read the docs, but my experience is limited I think it's almost impenetrable. I think that this should be simple, because the cover should always point to page 0 (in a zero index) and I'm not only bothered about 'back' because I can reuse the code because I have to work on the number of the last page. So if someone could help me by telling me how to set the 'cover' down on the first page (0) when you click on - I can go to bed at a decent hour!

  When you create a bookmark using a script you can define its action to a script, you can use something like that to the front page:

  myRoot.createChild ({cName: "Front Cover", nIndex: 0, cExpr: "this.pageNum = 0 ;"});})

  Moreover, instead of using '99', use this code to always create the bookmark back cover as the last of the list:

  myRoot.createChild ({cName: "Back Cover", nIndex: myRoot.children.length});

• Open the cover satellite 5000?

  I tried to open my lap top to get out the dvd drive, but I can't get the cover off. for me, it seems that there are still 4 screws left but does not unscrew. I thought u could just remove the dvd drive. If it screws or do I have to pull harder (I don't want anything of the things up.

  Hello

  Sorry I have to say that the DVD to the Satellite 5000 series drive is fixed mounted!

  As far as I know no disassembly of the plans are available on the net!

  Only one Service Toshiba partner has access to the plans!

  You can try to open it, but at your own risk!
  There is a high risk to damage the laptop, i.e. wrong screw in ca to cover damage to the motherboard or the cover!

  Hans Bye

• How do I configure my acpi settings lid (in the registry) so I can turn on from Hibernate with the cover of my laptop closed?

  I use my Toshiba Satellite 2435-S255 as a server connection to the Internet so I can access my music to any Spot Wi - Fi via my mobile device.  I have a third part closed to the down/power-on demand in hibernation during the night and wake up in the morning.  I don't want to work all night.  I don't want to leave the lid open.

  I had this operating system perfectly turning on and at the bottom, lid closed, without supervision... and then the computer's hard drive crashed.  Successor and updated everything and now... this 'thing' WILL NOT turn on hibernation with the lid closed.  I tried everything short of antics with the registry, which is what brings me here.

  I put the functions of ACPI, so the cover '' not doing anything. ''

  The only difference between the front and after the accident set ups is that, now, the machine is running XP sp 3 and before, it's only the sp 2 (I think).

  Anyone?

  Thank you!!

  Hello

  Please go back to let us know the status of the issue.

   

  I understand that you are always faced with the question even after changing the ACPI settings. Then I suggest you view the same thread in the Technet forum and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Remove the cover desktop (Acer AM3970)

  Maybe a stupid question, but it comes to remove the cover.  I removed all the screws that hold it and I can't move it.  I don't want to pry and bend the case that makes anyone who has an idea of how I can remove this cover

  Hello janlarmil,

  1. You remove the screws (x 2) in the upward motion
  2. You slide the Panel towards the rear of the chassis (press with your hands and slide back)
  3. That's all!

• "The HP LaserJet 1020 has the open front door or the toner cartridge is missing." Not true

  I'm going to print something and the troublescreen said: The HP LaserJet 1020 has the open front door or the toner cartridge is missing. But the door is closed and the cartridge is fine. I put a new in after the message started appearing thinking that the low level of ink was casusing the change. I suspect a mechanical switch is kaput, but do not want to enter the machine. All the switches look and feel like they are working normally.

  This little machine of love, it's a real workhorse, simple and effective.  I use a laptop Samsung with Windows 7 and my actions joint the printer using a Toshiba PC. We both get the same response from our little hp... todius

  I will now let you know that we have done to resolve this.  My wife has stuck a pencil in the slot of reception for the closed cover pin located on the corner left front of the top cover. She shook it until she was able to close the lid and printing. He now works as it always has.

  Babe thank you... todius

• U300s: The cover is bending...

  Just got a new U300s and love it! The only thing I wonder about is the bending of the coverage. Everyone finds that, when the laptop is closed at the front near the lenovo logo aluminum easily flexes inward? Often times I'm going to pick it up and it flexes.

  I'm afraid that this may cause display problems down the line

  Thank you very much!

  Note from Moderator: Edition subject to the content of the game.

  jeepin06,

  I tried a U300s in the lab today and I don't see what you mean - with the lid closed, you can bend the top of the lid in the front right corner where the logo is and towards the center of the LCD screen.  The rest of the cover appears to be relatively very solid.

  But when the cover is open, I am unable to create no hangup of the LCD screen to produce a round surface distortion corresponding to my finger, unless I'm also favorable at the edge of the LCD screen to prevent it from moving.  In other words, if I squeeze the Assembly with a reasonable amount of force, I can see an area in front of my finger, however the amount force seems much longer we would be reasonable applies opening or closing the system.  I see no effect on the LCD screen while opening / closing.

  Ultrabooks are deliberately thin and light.  Maybe the cover could be made thicker to eliminate, but probably the weight penalty or thickness which deprive it a little point of the design.  Maybe some filling material can be added to fill that space in the lid and make feel stiffer?

  I don't see this as a problem, but certainly a fair comment and something that could affect the perception of how robust is the design.   No doubt appreciate your comments - will share with the team of the ultrabook.

  Mark

• How to add the cover sheet without affecting the numbering of the pages?

  No response yet, so maybe I should change the question "Can we add a new section break at the beginning of a document?"

  Or "How do you apply a section on a Master Page break so that when the Master Page is added to the beginning of a document, it does not change the numbering of the pages that follow?"

  Thanks much for any help!

  [INITIAL QUESTION: is it possible to add a cover sheet to an InDesign document without affecting the numbering of existing page?] I have a series of chapters in a book that should be displayed individually and require a cover sheet. Each chapter to start on a recto page, and the page numbering is set with a prefix (the chapter number) and a page number, for example, page 1.1. I can manage to add the map coverage without other brewing pages, but the cover page becomes always page 1.1 and the text begins on page 1.2 (even if it's a front page). Is it possible to do without having to manually reset the numbering of the pages in the Section and Numbering Options window?

  Thanks for any help you can give – many of these documents to work on...  In addition, never submitted a question before, hope I did it correctly!  -JCI]

  Post edited by: J Shee

  Thanks for the reply. I found a different way to keep the pages of shift, but adding that the two pages and then deleting one of them is simpler, thank you!  The numbering of the pages still changes, then perhaps there is no other way than to manually change the numbering and section options afterwards (or writing a script, which is well above my head!). The rats, because I have about 160 of these documents to do. Ah, well!

  Thank you very much, once again!

• How can I get a folio by default for the cover page when the application is closed and reopened.

  The folio I do is a kind of 'show and tell' the thing, it must be pretty linear so a top of page from the cover of every time that it is open and then can be read through. I know it's easier than just using nav to return to the cover, but people that I do this to have knowledge of 0 and 0 willingness to learn, therefore, I would the folio to return to the front page, whenever the content viewer is closed and then reopened.

  I had to work on a previous iteration, but on my last version, he remembers what page I'm on when I reopen it the Viewer (logical and practical I know but not in this case).

  Any help would be greatly appreciated.

  There is no way to do it automatically.

  Neil

• Studio XPS 8100 - how to remove the cover of the modular Bay?

  I would remove the plastic cover of the modular Bay on the front of my venerable Studio XPS 8100 so I can install a USB 3.0 3.5 inch hub instead. However, I can't find instructions for it. In fact, I can't find any description of how to use the modular Bay.

  To start: how to remove the cover plastic modular Bay?

  Also: If someone has found the instructions on how to insert a player or another device in the modular Bay, I would be glad to know where I can find them.

  Hello rdunnil

  I took off the glasses and I saw how the metal plate is attached. Applying light pressure with a screwdriver flat head will do the job. Exchange on USB 2.0 ports would also work: I found directions for the removed from their metal case. Whatever it is, I'm all set. Thank you for pushing me in the right direction. It is much more valuable than the useless, generic link you gave me.

• Target Disk Mode - MacBook is not mounted in the desktop iMac

  I have a MacBook to 2015 and a cable USB-A-USB-C marked 'SS '.  In November 2015, I might start my MacBook in TDM and plug it into my iMac 2013 and see him mount on the desktop.  I could then synchronize some of the files (using synchronize folders) and have up-to-date on my MacBook.  Both computers running El Capitan.

  But about 3 months ago this system has stopped working.  Editing of my MacBook on the desktop iMac became sporadic and now never happens.  I have tried different cables, connected to different USB ports (the back of the iMac, iMac keyboard and a Flash to USB dock (Belkin)), but no joy.

  Has updated the firmware of computers?  El Capitan has stopped this feature very useful to work?

  Any ideas, anyone?

  Chris

  As a work-around, there are other ways of synchronization of files between devices.

  iCloud Drive, Box, OneDrive, DropBox, Google Drive. These will make everything you do.

• If I lose LTE when I come back on the cover he always says 3g

  I think I need to reset something, do not remember what.

  If I get out of the cover, when I come back on the cover custom phone access back to the tower or signal.

  Brand new 6 s, darnit

  How do I please you?

  Hey Randyaaaa,

  Not being is not able to connect to the cellular network when he returned in coverage areas. I had something like that happen to me before.

  What I would say is first reboot the phone by holding down the button on/standby 15 seconds, and then dragging the cursor on the screen.

  Once restart you the phone see if it connects properly. If this does not work I suggest to reset the network settings. This clears things like networks and Wi - Fi passwords remembers.

  To reset all network settings tap Settings > general > reset > reset all network settings. The phone will reboot and that usually solves problems like this.

  See you soon

• I received a bound book, but there is an error on the cover. It can be corrected?

  I ordered and received a bound book. There is an error on the cover. How can this be repaired?

  Hello

  Contact Apple directly > http://www.apple.com/support/mac-apps/contact/

• What screwdriver to remove the cover from the fan on satellite p10

  I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

  Hello

  Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

  My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

  Good bye