U300s: The cover is bending...

Just got a new U300s and love it! The only thing I wonder about is the bending of the coverage. Everyone finds that, when the laptop is closed at the front near the lenovo logo aluminum easily flexes inward? Often times I'm going to pick it up and it flexes.

I'm afraid that this may cause display problems down the line

Thank you very much!

Note from Moderator: Edition subject to the content of the game.

jeepin06,

I tried a U300s in the lab today and I don't see what you mean - with the lid closed, you can bend the top of the lid in the front right corner where the logo is and towards the center of the LCD screen.  The rest of the cover appears to be relatively very solid.

But when the cover is open, I am unable to create no hangup of the LCD screen to produce a round surface distortion corresponding to my finger, unless I'm also favorable at the edge of the LCD screen to prevent it from moving.  In other words, if I squeeze the Assembly with a reasonable amount of force, I can see an area in front of my finger, however the amount force seems much longer we would be reasonable applies opening or closing the system.  I see no effect on the LCD screen while opening / closing.

Ultrabooks are deliberately thin and light.  Maybe the cover could be made thicker to eliminate, but probably the weight penalty or thickness which deprive it a little point of the design.  Maybe some filling material can be added to fill that space in the lid and make feel stiffer?

I don't see this as a problem, but certainly a fair comment and something that could affect the perception of how robust is the design.   No doubt appreciate your comments - will share with the team of the ultrabook.

Mark

Tags: Lenovo Notebooks

Similar Questions

  • Remove the cover desktop (Acer AM3970)

    Maybe a stupid question, but it comes to remove the cover.  I removed all the screws that hold it and I can't move it.  I don't want to pry and bend the case that makes anyone who has an idea of how I can remove this cover

    Hello janlarmil,

    1. You remove the screws (x 2) in the upward motion
    2. You slide the Panel towards the rear of the chassis (press with your hands and slide back)
    3. That's all!

  • If I lose LTE when I come back on the cover he always says 3g

    I think I need to reset something, do not remember what.

    If I get out of the cover, when I come back on the cover custom phone access back to the tower or signal.

    Brand new 6 s, darnit

    How do I please you?

    Hey Randyaaaa,

    Not being is not able to connect to the cellular network when he returned in coverage areas. I had something like that happen to me before.

    What I would say is first reboot the phone by holding down the button on/standby 15 seconds, and then dragging the cursor on the screen.

    Once restart you the phone see if it connects properly. If this does not work I suggest to reset the network settings. This clears things like networks and Wi - Fi passwords remembers.

    To reset all network settings tap Settings > general > reset > reset all network settings. The phone will reboot and that usually solves problems like this.

    See you soon

  • I received a bound book, but there is an error on the cover. It can be corrected?

    I ordered and received a bound book. There is an error on the cover. How can this be repaired?

    Hello

    Contact Apple directly > http://www.apple.com/support/mac-apps/contact/

  • What screwdriver to remove the cover from the fan on satellite p10

    I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

    Hello

    Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

    My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

    Good bye

  • How to open the cover slot of memory on Satellite M60?

    Hello

    I want to add memory in my M60, but I do not understand how to access the inside... It seems easy to open the back of the drive hard, but for the record, I unscrew and after, the "door" stay in place and do ' t want to be removed...

    Thank you

    Hello

    Yes, it is easy to remove the cover of the memory at the bottom of the unit.
    I don't think that a single screw covers the memory slot cover. Remove this screw and use something thin and flat to remove the cover

    The details, you should find in the user manual (in my user manual I ve instruction)

  • How can I remove the cover for the printing of books

    Hello

    I just bought a 5510e Photosmart aio, B111a. It says in the manual that it is possible to print or scan books by unscrewing the lid. But how do you go? Seems I have to resort to violence!

    Hello I am

    I rechecked everything on the device. As in the image, press the left side of the back cover with your thumb. The lid should unclip. The first time the cover can be a little stubborn. After that the left side is out you can push the cover to remove the cover on the right side.

  • I cracked my apple logo in the cover Panel what can I do

    I cracked my apple logo in the cover Panel what can I do

    Invent a funny/stupid story to tell your friends when ask her why it is cracked.

  • Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

    I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

    It seems to be a micro-fine DUST, color dark Siver.

    1. Is it debri met fans?
    2. Can I use a Microfiber cloth to remove safely? and
    3. How it is there?

    Please check, as I don't know if it's to worry about.

    Is it debri met fans?

    Yes

    Can I use a Microfiber cloth to remove safely?

    For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

    • How it is there?

      Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  • Satellite 1110: cannot close the lid without insisting on the cover

    Hello

    I have a problem with my screen before covering. Plastic, which is around the screen, separated on one side, and I cannot shut down the computer without insisting on the cover.

    It is difficult to describe? Y at - it the possibility to solve the problem of the screen? All ideas are welcome.

    Christoph

    Hello Christoph

    In my opinion, you should be careful with these plastic parts. In my view, it is part of the very sensitive laptop and it will be perhaps better to contact the Service partner. I put t think there is a big problem.

    Probably just the fasteners should be placed to the right.

    Good bye

  • Open the cover satellite 5000?

    I tried to open my lap top to get out the dvd drive, but I can't get the cover off. for me, it seems that there are still 4 screws left but does not unscrew. I thought u could just remove the dvd drive. If it screws or do I have to pull harder (I don't want anything of the things up.

    Hello

    Sorry I have to say that the DVD to the Satellite 5000 series drive is fixed mounted!

    As far as I know no disassembly of the plans are available on the net!

    Only one Service Toshiba partner has access to the plans!

    You can try to open it, but at your own risk!
    There is a high risk to damage the laptop, i.e. wrong screw in ca to cover damage to the motherboard or the cover!

    Hans Bye

  • After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

    After you create a new playlist in iTunes, every song has the cover of the album and no box on the left side. How can I remove from the work and recover the box? TIA

    You can change the appearance of a selection by clicking on "reading list" in the upper right of the iTunes window. The desired view is probably "tracks"

  • Where to get the cover live thin for Satellite L755D - 12L

    Where can I find and buy a replacement from?

    If you don't Kow what I'm on everything, is fixed the plastic that is above the keyboard that hides the screws that hold the keyboard on.

    Thanks :)

    Hello

    I guess you need the cover plastic thin which is placed below the F1 to F12 key. Right?
    Well, all parts can be ordered from the Toshiba ASP (authorized) which is in your country.

    Welcome them

  • Satellite 1800-814: screen sometimes become black (recovered by pressing the cover)

    Hello
    In recent months, my Satellite 1800-814 screen suddenly goes black. Works with Windows XP SP2.
    Screen can be reactivated by pressing the cover (just above the power of the button on / off) a few times (not too long otherwise it will sleep of course).
    However, it makes me nervous about the quality of the portable computer, everyone has experienced this before, know how to solve this problem permanently?
    Rgds, Olivier.

    Hello

    Try it please check all settings (disable monitor) power management.

  • Satalite 1110: Screen dimming because of the cover button

    I have a portable Satalite 1110.

    It's old but works great but the small switch that is there to detect the lid being closed cheek upward...

    It the screen keeps going dim (almost extinct) trying to save energy when the lid is closed... but of course the cover is not closed!

    If I press the button several times, the screen turns on but it's very tedious...

    How can I say Blons button... the machine?

    Rick

    I'm afraid that you can't say anything but may cut the cable and disconnect this button but please do not ask me how.

    Otherwise you can try to disable using the Toshiba power management utility. Check if the option when I close the lid has option no action.

    Sorry, but I don't see another solution.

Maybe you are looking for

  • iPad Mini (4G) to iOS 9.3.1; Workaround to verification error?

    What is the last successful solution to update an iPad Mini (4G, Verizon) on iOS 9.3.1 and work around the error checking? I downloaded the iOS 9.3.1 but installation still gives me a check error due to the absence of Internet connection, which is no

  • Satellite 2430-402: driver for SM Bus controller?

    Can someone tell me please how to get the driver for SM Bus controller? I upgraded my software from XP Home to XP Professional. Then I used the tools and utilities cdrom to install the drivers but the controller Bus SM driver seem to be missing or I

  • Controller drivers/video display Qosmio F10-136

    I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVid

  • DeskJet 460, cannot use the Toolbox Windows in Windows 7

    Just bought mobile printer HP Deskjet 460 take traveling with the new laptop, which will no doubt be Windows 8.  Installed printer on my computer running Windows 7.  Installed automatically when I plugged it in.  Do not have installation CD.  Downloa

  • Program Setup, CQ1-1012AN error. Winows 7 Home Premium

    Model CQ1-1012AN. Winows 7 Home Premium, Service Pack 1, 32-bit operating system So far, I was able to install a new software/updates without any problem. Suddenly, during the installation, I get the error message: Setup could not create the director