Similar Questions

• Front panel display

  Sony DAV-DX250 front panel display will display interval short white aster. Click on the display board lens returns to the digital display for another short interval. Dad unit not overheated and has not been abandoned.

  Suggestions?

  Hello Truman,

  Try to reset the DVD Home Theater system and see if it helps.
  In order to reset,
  Unplug the power cord of unity HTS of the socket for a minute.
  Plug it directly to a power outlet and switch on the device.

  If the front panel display does not always illuminate upwards, perform a cold reset, which returns the system parameters, such as the speaker settings and preset stations, factory settings.
  To reset the cold,
  Press the POWER button on the front panel of the unit to turn it on.
  After this, press the button STOP, EJECT and POWER on the system at the same time.
  If the front panel displays works, then, "COLD RESET" will appear on it.

  If the problem is still not resolved, it may be necessary to return the unit for service. Use the following link for a repair facility for your HTS

  https://eService.Sony.com/

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• The time on front panel display

  Problem solved.

  Apologies to remove the original message. He initial post was something like this:

  --------------

  I twice parallel loops running - 1 who acquires the data every 30 seconds and the other just infintely loop to show the time on the front panel. But for some reason, timed loop data acquisition has been working well and do not release control to the other timed loop - for this reason present on the front was not getting updates.

  --------------

  After various discussions, I found what was my mistake:

  There are dependencies between the 2 rings - and no doubt because of the time was not getting updated.

  Solution:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=75933&query.ID=60956#M75933

  Instead of using 2 timed loop, I used a timed loop to purchase and a while loop as explained in the thread above to display the time on the front panel.

  I hope this helps.

  Thank you.

• DLL front panel display

  Hi all

  I need a program existing via a DLL interface.

  The current program load custom "drivers" for hardware, these 'pilot' can display a screen of debugging that is anchored in the calling program.

  How can I write my dll of the calling application can call a function of Billboard in my dll and return to the main program with out the displayed dll Closing Panel.

  Currently when the application calls the dll it will wait for me to close the panel displayed before continuing. I will try to solve the problem of home later.

  Hey Percy,

  Need to add display vi as always included in your build specification. Call the vi with a relative path.

  See the attached picture. It works, because vi lie side by side in the dll.

  Mike

• Why a VI block diagram display cannot show the display "connector" in the corner of UR, as does the front panel display?

  There may be a good reason for it that I just didn't understand. I saw no doubts, it searches the site of NOR, however.

  But it seems to me quite annoying to always have to go to the front to access the connector pane view, especially if some of these connectors are hidden. So I have to go the block diagram, guess what control/indicator I want display, go back to the FP to check it on the part of the connector, and then go back and hide it again, and repeat the operation if necessary. Even if the C / I is visible on the PF, it's still an extra step or two.

  When I build the connections using the diagrams and planning where to put connectors in subVIs they would be easier to associate (inputs/outputs on the sides line up, don't have to go up and down, etc.), it would be nice to be able to work completely in the realm of block diagram.

  Cameron

  Yamaeda wrote:

  Good idea, put it in the exchange of ideas!

  He has been there for some time already. No need to reproduce...

• How do you change the display screens during execution of the program?

  I would like to have a LabVIEW screen with a list of test Vi to run, and then select one to display.

  In addition, then return to the main screen.

  Thank you

  Looks like a project...

  Side main VI:

  Creata a dropdown list (use ring/enum control) with list of the test screw...

  now, create an event "value change" for control... to capture the current value of the control.

  use of the VI attached as main VI...

  and sub VI

  on close event, get the reference of the main VI and use the property node 'open front'... to return to main VI

  or you can close VI main when you cal a test Vi and re open the main VI when you close any criterion VI...

• Create the display object during execution

  Hello
  
  I have a requirement to create an instance of a DisplayObject which type will not know before execution.
  
  For example, instead of:
  public myObject:Button var = new Button();
  
  I want to be able to do something like:
  myObjectName:String public var = "Button";
  public var myObject: [myObjectName] = new [myObjectName];
  
  What is the syntax to do?

  If you have only one name (string) to convert a class, you need to complete (namespaced) name and use the library flash.utils AS introspection. specifically getDefinitionByName().

  var myClassName: String = "mx.controls.DataGrid; for example
  var myClassRef: Object = flash.utils.getDefinitionByName (myClassName);
  var myClass: class = myClassRef in class; should be first tested to make sure that is actually a class...
  var myInstance: Object = new myClass(); with optional params...

  If you treat first General names, such as "Button", you will have to map to the fullQualName appropriate "mx.controls.Button", etc.

  Hope that helps.

• How to make non-visible control on the Front Panel appear at Design time?

  I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

  How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

  Thank you.

  It is documented in the help of LabVIEW.

  Hidden front panel display

  
  

  Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

  1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
  
  
  2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
  
  

  You can also use the Visible property to display the controls and indicators by program.

  You can also view all hidden front panel controls and indicators.

  Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

• How to change the runtime of height and width of the front panel

  How to change the front height and width during execution. Basically, I want to decide height or width according to some parameters that I'm in the moment of execution.

  

  Ed johnsold was first

• Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360?

  Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360? I want to display a position of motor on the Panel before LabVIEW as a circle of 360 degrees. Is there a way to make the pledge appears as a circle of deg continues 360?

  dbaechtel wrote:

  Gauges and dials, buttons, none of them seem to be designed for continuous operation of 360 degrees. Of course I can set the scale of 0 to 360, but I can't get rid of the gap between 0 and 360.

  How to set up a pledge to show a continuous 360 degrees without a gap between 0 and 360?

  To change the gap, take the line high marker and move it to the desired location (in another origin, enter the low marker).

  Also, don't forget to wrap the raw in 0.360 rank if it falls outside. Here's a quick example (LabVIEW 8.0).

• IMAQ, zoom to fit display control disappeared during execution.

  As in the title. The menu is impossible to call during execution of the control display Imaq. This has happened after the compilation of the code.

  Any idea why this happened?

  Francesco.

  I had this problem before.

  The solution is not very pretty, but it can be found here: http://forums.ni.com/t5/LabVIEW/Missing-quot-Zoom-to-fit-quot-in-application-EXE-build/td-p/905681

  Birgit

• display the error when editing on front panel

  Hello

   

  When I add another tab (notching amplifier) in the front panel, the program displays connection error. What should I do to get rid of these errors? I am attaching the file along the slot vi.

  Kind regards.

  This happens because the data type of the tab control changes (you add another page). A tab control is essentially an enum and enum values are part of the data type. A reference to the tab control control is to be packaged and passed in several subVIs. Cluster of frontage on these subVIs control has the element 'Hand Control' value "Include the Data Type". Thus, what they expect to see (for example, a tab with 3 pages) is not what they get. That is why the thread cut. You must either:

  • Uncheck "Include the Type of data" for the item "control of the hand. I don't know what other impact this will have, as I look at all the code.
  • Update all the controls on the front panel with a new reference to the command.

  Aside: who wrote this program needs a lesson on the typedefs.

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• feature request - alignment of the execution of the front panel window

  I would like he's had a "pair of coordinates", marked by two positions on the Panel before which would serve the rectangle to display at the top left and bottom right positions itself for my front panel when executing. Then I wouldn't have to worry about the State of my eyes when I left edition.  I could simply mark the limits of the display and be assured that all the controls and indicators that were intended to be seen at runtime, would be visible and properly aligned with the window of the group.

  I advise you to take a look at this blog post, that addresses exactly your problem.

  It is the functions of the toolkit OpenG VI Fit window largest decoration.

  Tone

• display of a front panel without labview

  I have a cRIO-9073 that I use to control an oven. Everything works on my development machine, but when I open a browser on the computer that will be used in the oven, I can't front panel appears. All I get is the border and title blocks. The guy here who also LV said he used the performance Viewer? I can't find anything like that. What Miss me? I have attached the screen shot of what I speak.

  Thank you

  Seth

  The computer in the oven must LabVIEW or LabVIEW Run time engine. There was not a "Viewer" for many years.

  The image looks that you have either the Web server is running, or if this is the case, ActiveX was blocked.

  Take a look at aid to the publication on the web, or watch here