front panel remote - cRIO-9012

Similar Questions

• Server error remote panel on Crio-9012

  Hi all

  I would like to have access to a sub VI on the real time controller, but if I open it with the ordering tool remotely, an error pops up.

  LabVIEW: Resource not found

  An error occurred loading "lvfpp0.vi" VI

  LabVIEW support 3 error code: could not load front panel

  If I want to open the main VI it works fine, so the address, firewall etc seems to be OK.

  Best regards

  Benjamin

  In the meantime I also found a solution that worked for me.

  http://digital.NI.com/public.nsf/allkb/8F68715444302CAB86256DDD0071C140?OpenDocument

  Thank you James

• front panel remote with firefox

  Hello

  I used to publish screws on the 8.6 LV Web server, not the problems of witkout, but with workaround solutions, it entered into deployment.

  Now, to try similar things and are having problems.

  I use 2010sp1 (english version) LV on a German XP Professional with the German Version of browsers.

  To start simple, I used the web publishing tool.

  When I do a simple snap of the VI, it works very well with all browsers. When I turn on remote it works only with the

  IE (7 in this case), but only if I disable the Kaspersky Firewall (exe of the VI is included in approved programs)

  Opera (my favorite, here 11.5) asks a missing plug-in, but displays the header text and footer

  Firefox not similar but shows only a small icon for the missing front.

  I am well aware of the http://digital.ni.com/public.nsf/allkb/151BE12C055F57CE86257043006CB4B3?OpenDocument

  and the fact that insofar as I understand that "nplv2010win32.dll" is present when it is intended.

  The list of the addons/plugins in anf Opera Firefox the two metion the plugin.

  I hope that it is not true that remote Panel does not work with IE execept, as one of my colleagues mentioned.

  Gabi

  Hi Gabi,.

  Unfortunately, your colleague is right.

  There are problems using remote façade of LV in the latest versions of firefox.

  It has been possible with firefox 1.x.

  Opera is not supported for remote access of façade.

  In fact, IE is the browser more stable and reliable for the remote façade LV panels.

  Regarding the Kaspersky Firewall:

  Please can you check if all ports which are used in the Web of LabVIEW server are open...
  The ports used by the Server Web LV you can find in the settings the LabVIEW server options.

• Button of the front panel & remote control questions Qosmio F30-140

  Hello to all users of the Forum and to whom, who prefer Toshiba to a daily activity of s.

  I am owner of laptop Qosmio F30-140 for 7 months. I can say that I m happy with my laptop. But about 2 weeks back, I had some problems, which I can't resolve up to our days.

  I use Windows Defender to protect my PC from alert elements, applications of which I erased by this program once. There after I ve discovered that s keyboard buttons in the library and the remote responds does not and does not control panel. I had tests to recover by Qosmio player recovery CD, but unfortunately all attempts have failed.

  Please help me solve this problem, because I am deprived of my remote control, in which I so need.

  As for you and best regards.
  Dr.VugarVali

  Hello

  Looks like you have just messed the whole OS.
  Use and relocation of the recovery CD Qosmio Player will not allow Toshiba cotroll buttons and remote control.

  In you case reinstalling the driver would be desirable; Start with Manager common Module, controls, remote control.

  If it does not help the use of CD recovery Toshiba does wonders! ;)

  But note; Don t forget to back up your data because the recovery CD formats the HARD drive!

• cRIO, Webservice (REST) and front panel

  Hello

  I created a few simple webservice screws for greater application that runs on a cRIO. The webservice screws can be used to send simple commands to the application and give your feedback. So far, I used a LV frontpanel for interaction with the system, but for several reasons, I am looking for another way to do it.

  It worked well in the development environment. After deployment webservice screw they have communicated with the application according to the needs and I am able to control the system using simple URL typed in the browser's address bar. Later, I will add static content, but for debugging, it is fine.

  The thing is that now I have compiled and deployed the application, and now when I try to open the front panel I get this error message:
  "VI requested is broken and cannot be read or controlled."

  Previously I did not use the Web OR Application Server, so I installed to use the web services. Are there conflicts between a Web application server and remote server Panel? Any suggestions on how to proceed?

  I use LV 2012 and NI RIO 12.0

  Best regards

  Simo

  Hi Simo,

  If I understand correctly, you have the following configuration:

  cRIO with a Web Service of LabVIEW and several Web Service screw

  Some ways to debug deployed screws of LabVIEW Web Service are:

  You can have the Service of the Web of LabVIEW deployed in debug and debug remote Web Service of LabVIEW desktop.

  You can use a tool like factor to make it easier to apply and test your Web Service screw (similar to go to the url in the browser).

  You can create LabVIEW screws of office using the Palette of HTTP Client to test the Web Service.

  You mentioned the following"I have compiled and deployed the application, and now when I try to open the front panel... "

  I'm a bit confused as this front panel you open. For example, do you mean that a LabVIEW project has been opened on the desktop, the Web Service of LabVIEW in the project has been deployed to the target of RT cRIO, and now, when you open the Web Service screw on the desk to look at the front panel, you get an error message?

• Remote front panel in Tablet

  Hi all

  I am trying to establish a remote connection of frontage on a windows 8 OS 32 bit on 64 bit Tablet atom processor since an exe file deployed to myRIO. I had checked the remote façade on the development of PC connectivity (windows 8 OS 64-bit processor i7), installed the LV RT 2013 engine and the 32-bit drivers on the tablet. The problem is the remote connection of façade hangs after some time. I connect the target to a type B USB which is connected to an OTG cable and then to tablet microUSB port.

  1. I reduced the data rate to about 200 samples per second (20 display values on a chart by 0.1 seconds), the problem still persists

  2. the remote panel works pretty well when it is connected to the development PC and another PC (windows 8, OS 64-bit with LV RT 2013 installed) via USB, it's just the tablet that loses connection after some time (it says connection refused by the server control panel)

  3. I have connected the target to an active local network the WiFi on the shelf and got the remote control works perfectly. It is just the physical USB connection to the tablet with an OTG cable that creates the problem after a while

  I came to the conclusion that the problem could be with the 32-bit drivers (the screen gets stuck after some time however), OTG cable (I tried another one) or that the Tablet is running on 32 bit OS. I even installed LV 2013 on the Tablet, developed a test exe and tried remote front panel, still the same problem persists. All entries for what could be the problem?

  Thank you

  Arya

  
  

• display of a front panel without labview

  I have a cRIO-9073 that I use to control an oven. Everything works on my development machine, but when I open a browser on the computer that will be used in the oven, I can't front panel appears. All I get is the border and title blocks. The guy here who also LV said he used the performance Viewer? I can't find anything like that. What Miss me? I have attached the screen shot of what I speak.

  Thank you

  Seth

  The computer in the oven must LabVIEW or LabVIEW Run time engine. There was not a "Viewer" for many years.

  The image looks that you have either the Web server is running, or if this is the case, ActiveX was blocked.

  Take a look at aid to the publication on the web, or watch here

• Abandonment of the façade panels remote mess program

  I've successfully connected to another computer running my VI using remote façade panels. The computer that is running my VI uses parallels on a mac. I use safari on a mac when I connect to the VI. Every time I want to leave the browser I press Quit and it stops, but sometimes this messes up the program, and I get an error. The error occurs when I try to write a property of a Boolean LED node. Is it possible to prevent that plays? I have attached photos of the error and where it takes place.

  Disable automatic error handling in the properties of VI, or put a clear VI of errors (from the palette of the dialogue) after the property node.

  Property nodes only work when there is a front panel available. When you disconnect the remote façade, the VI has more available front, so the nodes property to generate errors. You should ignore this error. If your code relies on the reading and writing of the nodes property - if the logic will not properly work without them - then you need to restructure your code. When no front panel is connected, the Value property (signalling) never generates an event.

• rtexe works solo con el Panel remote

  Hola,

  Developing application of dataloggin una estoy para UN compactRIO con driver NI 9012.

  Cuando hago carga del practicable in el driver not sell me any error message. El rtexe as genero lo tengo configurado para that run al arrancar el sistema, y con el System Manager veo if carga todos los live.

  The problem that I have are el rtexe solo works correctamente cuando me conecto con el Panel remote al vi main dentro del rtexe mediante "Operate" is "connect to remote Panel. In cuanto me desconecto, el vi sigue cargado in memoria del driver, y según el System Manager, ejecutandose, pero are no hace lo that hacer has.

  Thank any pista me ayude a resolver este problema.

  Gracias y saludos.

  Hola nuevo,

  Bueno, it seems that there is me works correctamente. What he hecho ha sido sustituir some variable value por property nodes there are me works correctamente.

  Saludos

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Satellite L500D - what is that annoying red light on front panel?

  Hello

  I have my L500D the normal five system LEDs on the front panel of the base computer, where they are supposed to be. But then, to the left of these fires, there is that annoying red light, which is very distracting.

  But what is even more annoying than not one, + not a + manual owners I've read mentions none, + not even a hint. The manual mentions the other lights in their patterns, + but not this one. :-(

  Now, I'm assuming it's something really simple, and I publicly show how blind or stupid (or both) I really am. :-) But for love all holy, and before that I lose all of my hair, can someone tell me what is all simply as the red light?  :|

  And, while you're at it, maybe you can tell me how to turn it off! It would be a very unique experience for the moment. (B-)

  Don't get me wrong, I love my new L500D, my best investment by far and it goes like the wings and I write about a wacky ad jingle and broadcast around the world... If not for the boring red light. ;-)

  Help, please! (i)

  Hello

  I think you are talking about a wireless light located on the front left side of the computer. You can see here:

  http://laptops.Toshiba.com/laptops/satellite/L500

  Yes, it's a little boring, but you can turn it off by pressing Fn + F8 but in this case the wireless connection turns off. As for me, I use any wi - LAN, my knees is connected to the Internet by cable, and I never use outdoors.

  welcome them

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!

• e9180f: removal of the front panel? e9180f

  Hello, I need to clean my power swith (on the upper edge of the front panel) due to a spill of food products.  I have a side removed by removing a screw in the back and then dragging to the rear of the side panel. I don't remember if I already had the cabinet apart one more than this. The front panel can break, but I fear I will "break the BAD thing. I'm sure that WD - 40 or other cleaner used by switch electronic only should be OK. Thank you all for help.

  Please see HP document "remove the front cover HP Pavilion elite e9000, HPE-100 series desktop computers" for instructions on removal and replacement of the cover.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards