Frustrating problem

Similar Questions

• When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem just occurred, was not there before.

  Curiously, an error just for me that was not there until tonight (I have nothing new installed on my firefox). When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem, no matter whether on gmail on an email, facebook or a web page regular when I try to select my browser text is now scroll upward on its own literally as soon as I'm going to highlight, that means I end up selecting everything on the page when it scrolls upward. Can anyone shed some light on how I can solve this problem suddenly?

  Thank you

  I am pleased to learn that you have been able to solve your problem of Firefox.

  I reported this problem to the addon developer, in the hope that they will be able to patch the issue soon.

  Please use the Mozilla Support Forums. We hope that you will continue to sail with us.

• A frustrating problem that I have PSD files imported in ID CS3

  I do some layouts for ads for magazines, and I had a frustrating problem with Photoshop and InDesign CS3 for a long time. Basically I want to drag PSD files we already have for our products in my layout and use them as-is, but when I do, they appear as ugly things scrambled in my InDesign CS3 layout, no matter what happens. The solution is for me to load the PSD, copy the contents, make a new file, paste the contents of the last another file, and then save it as a new file PSD - things will work fine. But it is a big pain in the ass, and I want to correct the problem and remove this step.

  You can see an example: http://TwitPic.com/1kxp33 .

  Basically, the image on the left shows the distorted image that slipped in the layout. But maybe it's just a normal PSD, single layer, saved with some incompatibilities as not saved in 'compatibility mode' or saving with a color of attached file. The right picture shows the good image that I manually re-recorded and imported.

  
  Can someone help me understand why all my PSD files are being blurred when I drag them in InDesign?

  I don't see anything in the metadata, but I suspect that the previews are watered. The reconstruction of the help of cache (probably not)? Are they stored on a network or locally?

• Frustrating problems with the Kodak Easy Share application.

  When I start my Dell XPS, pack 3, the popup says Kodak Easy Share error has encountered a problem and needs to close, also, when I try to download the latest version of Kodak Easy Share the same error msg appears. Kodak solutions I tried and nothing worked.  Help.

  Hello

  Glad to know the steps helped to solve the problem.

• DisplayPort U2713HM frustrating problem

  I just got a new Dell U2713HM monitor and tried to connect it via cable DisplayPort 1.2 from a PC brand new.

  The monitor says "No DVI not connected" and enters a power saving Mode.

  Symptoms:

  1 connect only DP of PC from Dell U2713HM-> monitor goes into power saving (and on no detected DVI companing) Mode

  2. connect only Dell U2713HM-> DVI monitor to the PC up to 1920 X 1080 display resolution (not enough and clumsy to be honest)

  3 - connect the DP and DVI simultaneously - monitor behaves strangely. He blows a small portion of the screen, so you can't see the other parts of the screen. I can see the mouse moving through. Right-click on the screen and go "Screen Resolution" displays a maximum resolution of 2560 X 1440, but I get to use it and it does not change this mode of supply.

  This seems to be a problem in the new range of Dell of whose very disappointing for this superb rather monitor.

  No idea how to solve this problem?

  I have corrected the problem. In fact, it was not a problem, but rather a configuration problem.

  Go to Dell menu and set the display Port input source (it is not detected automatically)

• frustrating problem with a dat/time field

  I'm pretty new to this tool (LiveCycle) - once more to try to modify/create a pdf form on very simple writing

  I inserted 2 fields of date time. I have a correctly configured automatically insert the current time, when the form is opened so the user does not have to do... ;

  The following field must be a time field so that the user does not enter anyone.

  I have the date field load properly, but for the life of me cannot get the time to display at all.  I tried:

  1 Add a new date/time field

  2 duplicate one that works and just change the format of 'Time '.

  3 tried to remove them both and then create again.

  I discovered by removing both and starting, as I can get the date to appear in these two areas, but I can't do anything else to appear.  I can not get the time to appear in each area. !!

  Frustrated: Somebody can tell me what I'm doing wrong here...

  Because I don't see a place for me to download the form here, I posted on the following Web site

  I think you just download it and take a peek - if someone would be so kind - could explain things better to see for yourself.  It seems buggy to me, but I do not know!

  Thanks in advance,

  Dan has.

  See: http://provsnusa.com/test.html

  Hi Dan,.

  The time field was still date in script functions, although you use a time model (in the object > field > models).

  Just changed the script for:

  Current time in short-style date format.

  $ = num2time (Time (), TimeFmt (1))

  Here is the form: https://acrobat.com/#d=63FQyQ3bVTlj8ERIjvUGJw

  Good luck

  Niall

• Return of the frustrating problem of e-mail with blackBerry Smartphones

  After having my BB still reset my TI guy, I brought it home to install a few programs (box letters BES and some games).  When I plugged the device on my computer after starting dm (version 4.2) I was encouraged because it did not sync things that she had done in the past.  I installed the software and voila, I get the nice email telling me that I am no longer connected to the BES.  I tried to remove the battery for a minute or so, but not joy.  Exploring further, I noticed that under options > advanced options > Enterprise activation that my e-mail address is missing.  I had this thing reset every day this week, I can't figure out what I could do wrong.  Any ideas?

  Just uninstall dtm of add/remove programs and then reinstall it on the cd delivered with BB, and during the installation, choose BIS as an installation option.

  Yes, you have to buy 6 pack I guess.

• problems with calendar

  I'm having a frustrating problem with calendar projects. When the project is exported to another preview of pdf or simply buy, the months at the bottom of the page text appears as very low. There is no way to change the font size at all stages of the project. I had this same problem in November

  and got about it fly by the whole project and 4 hours of work and starting over. He then worked and I thought the problem was a corrupted file on my end.however that I have invested a whole day to do this project on two different Macs with the same result. any help or ideas would be appreciated

  !. With the help of pictures 1.5

  2. the two Macs with 10.11.4

  3. using color paper theme

  4. not all months have MONTHS small TEXT seems to be random

  First of all, as a test pictures of launch with down option and create a new test library.  Import photos and a test to see if the same problem persists. T it? If this is not the problem is limited to your library so try to repair the library according to the instructions in this document from Apple: Repair Your Library.

  Warning: If you use iCloud photo library with Photos, this operation will lead to Photos to upload all your pictures again (of difficulty missing or incorrect thumbnails in photo - Apple Support).

  If that doesn't solve the problem user jdelisle posted a fix for the same problem in iPhoto.  Don't know if it applies to Photos, however.

  jdelisle

  December 6, 2012 20:00

  Re: Change the font size of the text in a font of month date box resizes also irreversible at 6 points?

  in response to Loki cyberworld

  I ran into the same problem - my iPhoto calendar month text was small for a reason, and I couldn't change it to a larger font size. I decided to take a look at the way iPhoto stores project data and discovered that it is a simple SQLite table.

  Here is a fix, guaranteed to work.  We will open your iPhoto projects database and edit the details of the police directly by hand, because there is no way to fix this in iPhoto (Apple, correct this bug...)

  This seems much more difficult that it is what is serious effort of 10 minutes.

  1. Get SQLite Browser http://sqlitebrowser.sourceforge.net/
  2. Quit iPhoto and launch the browser of SQLite
  3. Open a new finder window and open the pictures folder located in your home directory
  4. You should see a section in your folder of photos called "iPhoto Library".  Right click and choose "Show Package Contents" because we need to edit a file inside the library
  5. Search for "Projects.db."  Right click and choose "Duplicate" to make a backup in case something goes wrong
  6. Drag and drop the "Projects.db" in the application being SQLite Browser
  7. Click on the button "browse data".
  8. Select the 'KHProject' in the menu dropdown "Tables".
  9. You will see a list of your iPhoto projects.  Locate your calendar project by browsing this list and especially the values in the column 'name '.  When you have found your calendar project, take note of the number in the column 'modelID '.
  10. Change to the "KHProjectTextStyle" table using the drop "Tables".
  11. Locate a line in the table "KHProjectTextStyle", where the number in the column matches 'projectID' 'modelID' you noted in step 9, and where the value "IdentificateurStyle" is "Photo-calendrier-CalendarMonth.
  12. On the line drawn in step 11, look at the value of the column "fontSize".  For my broken calendar, he was "6".  It's much too small, that you can barely read 6 points.
  13. Double-click the "fontSize" value (for me, I double-clicked the value '6')
  14. Replace the '6' '54.  Do not press on enter, just change the '6' '54"and click the button"Apply Changes ".
  15. You're done! Simply click on the disc icon in the browser of SQLite to save your changes (or file-> save)
  16. Open iPhoto and enjoy your calendar fixed

  Hope that helps some of you, this worked 100% for me on several projects of calendar.  If you see not the font size change, make sure that you have identified the correct project in step 8 and make sure you change the "fontSize" for this project, on the line where the value "IdentificateurStyle" is "Photo-calendrier-CalendarMonth.

  If something was terribly wrong, you did a backup in step 5 (right?) and just delete the "Projects.db" you have edited and rename "Projects.db" of the backup.  You can then try again, or not.

  I send my calendars to print this week and will see if there are any questions.  I don't anticipate any problems.

  Don't forget to back up your library before you try the hack of the database file.

  

• HP Probook s 4320 - wifi problems

  Thanks in advance for reading and pay attention to this frustrating problem I have.

  I use a HP Probook s 4320 and just reinstalled Windows 7, as well as all pilots & assistant wireless etc.

  At home, I have a broadband thanks Talk Talk (UK), through a router D Link N ADSL2 +, who works currently with no problem on a number other devices, laptop (Win Vista) Samsung, PS3, iPhone etc.

  I've used the wifi on the laptop with no problems.

  After reinstalling and coming to set up my wifi network, it recognizes my network and many others around me, I choose mine & try to enter my passowrd - unauthorized, then press the button on the router & go through it - everything seems to work ok.

  After you connect to the internet for about 10 minutes, the connection drops and when I click the icon at the bottom of the taskbar wireless, my network is displayed at the bottom of the list with a red X next to it and I can not connect.

  When I try, it says: -.

  'The settings saved on this computer for the network do not match the requirements of the network.

  When I right click on the wireless icon and select '' problems of disorder shoot, '' he says: -.

  "Check your wireless security type.

  I can connect to the internet without any problem using the wired connection through the router.

  When I go to security settings, they are:-

  -WPA2-Personal security type

  -Type of AES encryption

  Network - correctly-entered security key

  Please could someone help me to be able to use wireless correctly, I would be very grateful!

  Thank you.

  Hello:

  What model of wireless card you have (make and model)?

  There must be a newer there than in 2009 driver.

  It's probably the main issue.

  After you let me know that you install the updated driver, delete the network connection and it restore from scratch.

• Satellite P15-8409, Atheros wireless network adapter problem

  Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:

  The device cannot find enough free resources that it can use (code 12)

  The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.

  At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.

  I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.

  all the best,

  James

  BIOS version is installed on your machine? And you have you recently changed some hardware etc...?

  I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.

  Maybe the exchange of cards should solve this problem?

  Welcome them

• Problem Touchpad on Satellite P750 - 02L

  Hi guys, so I have a P750 satellite, according to me, it's a year old just on sound now and since it last a few weeks the touchpad began to play up.

  Whenever I turn on the laptop for the first 5-10 minutes the Mouse touchpad refuses to do what his.
  Half left of the key is completely insensitive and the right side you move your finger to point the mouse and it just goes wherever he likes, he's not going no where I try so that it points.

  Also during his this operation, it is quite often the resizing thing, how you drag it with 2 fingers to zoom. It is a very frustrating problem. I have not fiddled with the settings, I did a reboot of the system back to factory settings, still no luck.

  On a side note, my media keys at the top of the keyboard is no longer light up or make a beep when I press on them.

  This isn't a big deal, but I liked it when they were still on and beeps when you press on, any help on this issue would be appreciated but not necessary. I just my mouse working again :(

  so to sum up the Mouse touchpad refuses to answer correctly for the first 5 to 10 minutes of power upward until it works perfectly normal again.

  Any help would be appreciated.

  Thank you for taking the time to read this rather long question, your help and your feedback will be appreciated.

  > I did a reboot of the system back to factory settings, still no luck.

  What does that mean? Did you use the recovery option? Otherwise, try to get the laptop back to factory settings
  Not quite sure if the touchpad problem is software related, but could be solved by the system recovery

• Problems after update IV calls AudioMaster step

  I'm about to deploy the system to my test, and I ran into several frustrating problems.  After trying to update VI calls, I'm more able to run my Audiomaster steps.  I also can not change the treatment of signals, change the graph limits or change the key settings in the AudioMaster steps.  I am able to change the configuration.

  I have attached an error one of the AudioMaster steps.

  Error running substep "function Keyparameter".
  Open in mxLT VI reference is measured in Teststand.vi-> mxLT function of key parameters for TestStand.vi-> mxLT function key for TestStand.vi.ProxyCaller parameters
  Error loading VI ' mxLT vector result viewer envelope.vi.
  LabVIEW support 10 error code: version VI (8.2) is too old to convert the last version of LabVIEW (10.0f2).

  The VI path: C:\Program Files\microLEX Systems\Common Files\PrivateCommon\mx
  LabVIEW: Version VI is still too early to convert the last version of LabVIEW.

  6.2 AudioMASTER (current version) is built in a dll, except the plugin LimiTEST (parameter Key, signal processor, limiter chart) that must run in LabVIEW 8.2 (Run Time). In the next version AudioMASTER 6.3 (projected release 4th quarter 2011) LimiTEST is included in the dll (build in LabVIEW 2009).

  The trick in Teststand deployment is to build the application (the operator + sequence interface) on the developer machine without including the AudioMASTER components in the build, then installing the sequence and AudioMASTER (using Installer AudioMASTER) on the target computer. This will ensure that the correct registry on the target computer settings for AudioMASTER.

  AudioMASTER Vi should not be compiled LabVIEW 2010.

• Select the problem with expressions

  Hello

  I use Teststand 4.0 and a frustrating problem with the Select Case statements.

  I have attached a sequence that shows the problem.

  A loop from 0 to 10.

  The select case statement should decide which box 3 instructions corresponds to the expression and a message box is displayed.

  However the Basic program reacts as expected.

  First, he made his entry with a value of 0, it goes to the > 7 stated case.

  The second time, he enters the loop with a value of 1, it will correctly to the<3 case="">

  The other values of 2 to 10 enter no case statement.

  Is this a bug in TS 4?, or I do something wrong?

  Thank you

  Mike

  The problem is that you compare the Locals.New_Val of the Locals.New_Val property.< 3". ="" if="" those="" two="" properties="" match,="" then="" it="" will="" execute. ="" if="" you="" wanted="" that="" particular="" case="" to="" execute="" when="" locals.new_val="" is="" 0,="" you="" would="" just="" type="">

  Unfortunately there is no way to have multiple cases of a single block of code.

  In C, you could do it like this:

  Switch (newVal)

  {

  case 0:

  case 1:

  case 2:

  do something

  break;

  case 3:

  case 4:

  case 5:

  case 6:

  case 7:

  do something else

  break;

  etc...

  }

  Even in C, it's awkward, and you would probably do the following instead:

  If (newval<>

  do something

  Else if (newval<>

  do something else

  on the other

  do something else

  The reason why it works in TestStand, is that expressions will try to automatically convert types if she can do it.  false is logically equivalent to 0 and true, it is logically equivalent to 1, so what you are really comparing to in your case statement is your property (Locals.New_Val) to a Boolean expression that evaluates to 0 or 1.  It is certainly not obvious when we look at, but at least, this explains why it happens.  Another way, you could do this is to change "Point to compare" step of the 'True' selection, which will each case in order to compare the expression of the value 'true '.  I still recommend a structure if/else if/else for this kind of problem because it's easier to read, but it is possible to do what you want in this case with a select / box.

  P. Allen

  NEITHER

• Update to Windows 8.1 causing problems with S7-392

  Since the upgrade to Windows 8.1, I have experienced frustrating problems with my S7-392.

  At this point the two main issues are:

  1. when running on battery, it stops intermittently.  Happens if I am using or not.  I've fiddled with the power such as disabling sleep options, etc.

  2. when waking from sleep or stand-by (don't know what mode it is in), by opening the cover, I'll see the announcement of logo sceen Acer will start "from auto repair.   Then it goes to a screen where it is said he couldn't fix it, and I want to restart or go to Advanced Options.

  I have updated all drivers and BIOS the newer versions which were released on 10/13.

  At this point, I feel like I want to go back to the original settings.

  Someone else is having these problems after updatig?

  I had exactly the same symptoms (if no Windows 8.1 upgrade was) this is the message that seems to have solved my problem:

  https://community.Acer.com/T5/ultra-thin/Acer-Aspire-S7-391-9413-keeps-shutting-down-randomly-while-...

• The backup of the original XP-Professional, I installed __was reported by microsoft. Now I can not understand how to fix my problems or get my stuff back, they took, since I don't have the original CD anymore! Help!

  I tried to fix my audio driver on my computer, when he asked me to put the XP CD to repair & I don't have the original CD only the back-up they gave me the original. Then Microsoft Pavilion saying: it wasn't the original & then they took all my windows live, security, Installer, and it has marked for deletion is that he repeats to me! I can't cut & paste either more I still have no sound. I tried everything to try to solve this problem it has been 3 months of frustrating problems & no information on how to solve this problem! My original XP - Pro instillation PAST the requirements of microsoft so I hope that this can be resolved if possible & ASAP! And anyway to solve this problem!  HELP ME PLEASE! Thanks :-)... H.Lu

  Hello

  I would ask you to contact the manufacturer of the computer for the installation of Windows XP CD and run the sfc scan to check if any system files are corrupt and can be replaced.

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  You can also visit the Web site of the computer manufacturers for the sound card drivers and install the app Windows Live see link below.
  http://explore.live.com/Windows-Live-Essentials-XP

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.