Fs2000 MS running Windows7

Hi freaks

does anyone know if MSFS2000 is running with W7 - OS?
I couldn't start, both in mode W7 and XP/SP2 mode.
Can someone give a tip?
thx a lot
Uwe

Ive actually got no sim card to try, but I found this comment in a search:

' I have it works fine in Win 7, my problem is that the sim card does not recognize my MS Sidewinder Pro stick. " When installing don't let not autorun take off, cancel it and go to the folder where the program is located. Find the file "FS2000.exe" > right click and select Properties > click 'compatibility' > go into "change settings for all users" > check the mode you want to run as that (try Win XP) > go to the bottom of the box and check that "change settings for all users" > then check the box "Run as Administrator" > all OK and close the box of. Now, run the Setup file to install the program. I did it twice and the program works fine on my keyboard, I can change all the settings all right except... NO JOY STICK " - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/flight-simulator-2000-not-working-on-windows-7/e5e2adef-dd40-4967-b3c8-742a506706ca "

S0, have you tried to install in compatibility mode?

Tags: Windows

Similar Questions

  • computer laptop samsung N148 yourself running windows7?

    computer laptop samsung N148 yourself running windows7?

    Yes, the Samsung N148 supports Windows 7. Samsung has Windows 7 drivers for the N148 on their site:

    http://www.Samsung.com/ph/consumer/monitor-peripherals-printer/notebook-PC/NetBook/NP-n148-DP01PH/index.idx?PAGETYPE=prd_detail&tab=support

    The N148 is not a DVD player, so you will need to install using an external DVD drive or USB key.

    How to make a USB installation drive:

    USB Flash ISO - if you downloaded the ISO file and you want to install Windows 7 using a flash drive:

    Windows 7 USB/DVD Download tool allows you to create a copy of your ISO of Windows 7 file on a Flash DRIVE or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the Flash DRIVE or a DVD. If you have a 4 GB or more large USB key (or external hard drive), and the computer can boot from USB:

    http://store.Microsoft.com/help/ISO-tool

    USB stick installation files - WinToFlash is a practical application that will help you transfer your Windows 7 installation from a hard drive or DVD to USB flash in a few steps. That you can install Windows 7 from a flash card, USB stick, HDD, etc to your computer or netbook. If you have downloaded the .box file extract everything first. If you have a 4 GB or more large USB key (or external hard drive), and the computer can boot from USB:

    http://www.Softpedia.com/get/system/system-miscellaneous/WinToFlash.shtml

  • Problems connecting Xbox 360 to Windows Media Center on PC running Windows7 professional

    I get an error when I try to configure my xbox and pc with media center.

    Configuration error

    An error occurred when setting up your computer for use with this extension.

    Journal name: Media Center
    Source: Microsoft-Windows Media Center Extender
    Date: 2010-08-15 22:15:22
    Event ID: 545
    Task category: Configuration
    Level: error
    Keywords:
    User: xxxxxxxxxx
    Computer: xxxxxxxxx
    Description:
    Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0017FA67DAA3.

    Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.

    Every time I try it I get the same six news and an error in the Event Viewer log.

    1 Media Center Extender configuration started with the following parameters: affiliate code: 788

    2 Media Center Extender Setup has determined that the Windows Firewall is enabled in the profile of the House.

    3 Media Center Extender Setup found the following firewall: Norton Internet Security

    4 Media Center Extender is found:

    ID: uuid:10000000-0000-0000-0200-0017FA67DAA3

    IP address: 192.168.1.3

    Interface GUID: {0d143a51-fd83-4860-982e-93c34f2055db}

    NHED type: X 02

    5. software Media Center Extender was sent to 'uuid:10000000-0000-0000-0200-0017FA67DAA3' Extender.

    Software version: 0 x 20656804

    6 Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-0017FA67DAA3' found at address 192.168.1.3.

    And then the error:

    Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0017FA67DAA3.

    Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.

    Anyone got any suggestions?

    Affiliate code: 788

    other than running
     
    sfc/scannow
     
    to check system files, in view of the question with the newly created accounts and the fact
    than you
     
    > I took out my Windows7 disk and ran a? upgrade? hoping that this would fix file what either seems to be corrupted, but the question remains.
     
    I would say that if you reformat and clean install, you don't have much chance.
    I'm sorry.
     
    The game, 19 August 2010 00:28:55 + 0000, lcypher wrote:
     
    > I get no new account that I put in place to connect, they fail with the following message. ? The user profile Service has not logon. User profile cannot be loaded. ? He comes up with new admin accounts standard, my current admin and still function of standard accounts. Seems to me that my problems (now two) could very well be related. I got out my Windows7 disk and ran a? upgrade? hoping that this would fix file what either seems to be corrupted, but the question remains. I try to find a solution that does not involve a new hard disc or renovated and complete reinstall, but no hope now. My next step, I guess that would receive technical support from Microsoft but that grinds really me. Never had this problem with the years under NT and XP.
    >
    > Any other suggestions out there?
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • will be firfox 15.0 downloaded b inwindows7 32 bit running windows7 64-bit?

    I downloaded firefox 15.0 b setup.exe using windows7 ultimate 32 bit operating system. Firefox software asked me by the my friend if I giving my friend that is using windows7 ultimate 64 bit.will it works in his laptop?

    Yes Firefox 32 bit works perfectly on Win7 64-bit operating system.

  • How can I access the webcam on a laptop running windows7.

    I would like to use the webcam on my Asus laptop under Windows7 home premium. Emanuel that goes with it is a joke and Asus wants 38 dollars to tell me. I have a ywar 10 old Toshiba with linux os and I can see myself on the moniter and take pictures and videos without problem. I wish I could do the same thing with the Asus laptop.

    I would like to use the webcam on my Asus laptop under Windows7 home premium. Emanuel that goes with it is a joke and Asus wants 38 dollars to tell me. I have a ywar 10 old Toshiba with linux os and I can see myself on the moniter and take pictures and videos without problem. I wish I could do the same thing with the Asus laptop.

    ================================
    Maybe the next video would offer a few ideas:

    How to navigate your webcam on an ASUS laptop!
    http://www.YouTube.com/watch?v=2QZBiCMQ6Wk

  • Pavilion Elite 9120Y running Windows7 (64-bit) has frozen. BIOS does not detect not SATA.

    HP Pavilion Elite 9120Y (about 1 year and more) running Windows 7 (64 bit) froze in the middle of a task.  The fan used to rev up every once in a while for 1 year or more.

    I opened the box and looked for the capacitors blown on the video card, but the video card is OK.

    A few times I was able to go in Windows 7 safe mode, but the computer froze in safe mode.  After a while computer ceased to recognize the HARD drive.

    Diagnosis (memcheck) startup DVD worked for a day or two before that stopped working.  Now, I have a Fedora LiveSpin USB and it starts after I disconnect the DVD, CD and HARD drive (SATA all).  Even when the HARD drive is connected, and the Fedora boots, he becomes failure SATA COMMRESET.

    I have to power off / power on many times before the start screen appears (otherwise, it's only in black).

    I have reset the CMOS (change jumper setting and changed back to the original setting).

    In short, it looks like SATA features doesn't work anymore, or bad BIOS.

    How can I request the upgrade of BIOS (for the HP 9120y website) if it does not start Windows 7?

    Any other solution of workarounds, tips, troubleshooting pointers appreciated.

    Thank you.

    The phase I) prepare
    Make a note of the version of the BIOS installed on your computer.

    Phase II) prepare a bootable USB key.
    Visit http://www.biosflash.com/e/bios-boot-usb-stick.htm to find out how to prepare a key USB bootable BACK.

    Phase III) extract the ROM BIOS update the BIOS executable file.

    (1) download the HP provided executable update BIOS.
    (2) download 7zip from sourceforge.net.
    (3) install 7zip
    (4) run 7 - zip file manager, navigate to the provided HP the BIOS exe and extract in the content (by pressing the blue less icon).
    (5) locate the VL (number) (number). (number) (number) file to the USB stick and copy.
    (6) on the USB stick copy port or the VLnn.nn file and rename it HPBIOS.ROM.

    The phase IV) BIOS upgrade
    (1) switch off the PC, in need of updating
    (2) fix the USB
    (3) to start the PC, and you should see the c: BACK prompt.  No harm done so far.
    (4) issue the dir command to see the HPBIOS. ROM on the USB stick c: / > directory.
    (5) reboot the PC, but this simultaneously press the CTRL and the key HOME together when the PC starts.  Hold it for a minute.
    (6) you can release the keys after a certain time (when we know the PC fan is buzzing and do something)
    (7) you don't hear about 5 long beeps (which indicates the BIOS upgrade is complete).
    (8) restart the PC.

    Audit of phase V)
    Check to verify that the BIOS version number reflects the newly installed version.

    References:
    http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-recovery-process-for-HP-systems-with-AMI-BIOS/m-p/360147/highlight/true#M9181

  • Satellite L630 does not recognize 8 or 32 GB SDHC cards running Windows7 32 bit

    I want to use a Sandisk SDHC cards in the bridge media slot.

    The manual says: "Bridge media slot allows you to easily transfer data from devices such as PDA and digital camera that uses flash memory (card Secure Digital (SD) / Secure Digital High Capacity (SDHC) / Secure Digital Extended Capacity (SDXC) / Memory Stick (MS) / Memory Stick PRO (MS PRO) //MultiMediaCard (MMC).).

    The maximum capacity of the SD memory card is 2 GB. The maximum capacity of SDHC memory cards is 32 GB. The maximum capacity of SDXC memory cards is 64 GB. »
    Why my L630 is not recognize my Sandisk MicroSDHC cards in the adapters provided in the bridge media slot. He considers SD cards rather than SDHC cards and they cannot be used.

    Card MicroSDHC operating in the media slots of bridge of a notebook from ASUS and Mac pro, but not the Toshiba L630 PSK041 037001, the problem lies in the Toshiba. It works in an on the Toshiba USB adapter.

    I reinstalled the Realtek card reader driver, but this did not help.

    How can I get the SDHC card to read in the bridge media slot? Toshiba has another driver?

    Thank you

    AFAIK the card reader in this series of mobile takes care of the multimedia suite:

    SD card, 8 MB - 2 GB
    Mini SD Card, 32 MB - 2 GB
    Micro SD memory card,
    SDHC 4 GB to 16 GB card
    MultiMediaCard,
    Card Memory Stick, 8 to 256 MB
    Memory Stick Pro, 256 MB to 2 GB card

    SDHC 32 GB are not supported.
    SDXC is not supported

  • Would be my model Averatec 5110 H with Intel Mobile Pentium M 1.3 GHz, 512 MB DDR PC2100 run Windows7 Home Premium?

    with Intel Mobile Pentium M 1.3 GHz.

    512 MB PC2100 DDR
    40 GB
    currently W XP

    Yes and no. Your processor meets the minimum requirements of the system but, your ram only. However, even if you had more ram I wouldn't recommend. Personally, I found win 7 does not work well on anything less than 2.5 GHz processor. I he would go on 512 MB of ram if I tweaked even though the requirements are 1 GB. Your processor is your problem.

  • I would like to add the functionality of usb 3 to a desktop HP Pavilion P7-1254 running Windows7.

    I would like to use an external USB3 drive to back up my system. How do I know what USB3 card can be added to my motherboard?

    Bill, welcome to the forum.

    Here is a card that should do what you need:

    http://www.Newegg.com/product/product.aspx?item=N82E16815150222

    It's a PCI Express x 1 card.  The motherboard has 3 of these slots.  If you do not want this card, it will work as an example of what you need.

    If your problem is solved, please click "accept as a Solution.

  • PNY USB 2.0 key does nothing when it is plugged into my usb port. running windows7 home premium. Help?

    Windows 7 compatibility page shows pny 4 GB attached mini usb 2.0 drive compatible with no additional downloads necessary. PNY show instructions for loading manually driver for win 98 only. Download driver I tried the detective, no help. all of the suggestions. try to use the usb for quicken deluxe 2010 backup instead of cd

    Hello

    For this USB drivers should be installed automatically by Windows 7, when you connect the player to what messages we get as appropriate, if you open the computer to open the drive it appears as a removable device?

    If not and with only the connected USB device opened upward Device Manager (Manager type of devices in the area start search to quickly find) then open the USB Buss controllers branch, click it + and looking for USB Mass Storage Device righ click on uninstall, then unplug and plug in the USB pen and see if Windows loads the drivers ok.

    If not there yet with the USB pen connected open disk management and check if the USB key is listed as a removable drive, it may simply need to change its drive letter, change it to X, Y or Z for example.

    Some info on the disc switch letters HERE

    There may be a crisis today... my schedule is already full

  • I have a HP Desktop running windows7 and cannot find a way to adjust the brightness of the screen. Help, please

    The monitor is a HP backlit. I can use the buttons on the monitor to display its menu at the bottom of my screen, but have not found a way to combat it. The cursor will not appear on the top of the menu display. I may need to use a combination of keys, but just don't know.

    There should be a button on your monitor, you can push to adjust the brightness, contrast, height, width, and other things too.  Since it is different from one monitor to the other, you will have to consider to make it in the documentation on the monitor, the monitor, or on the web site of the manufacturer of the monitor.

    Good luck.

  • Where can I download my CD/DVD-ROM drivers for my dell inspiron 5520 running Windows7?

    I have recently reinstalled Windows on my laptop. I installed (maybe all) drivers. I don't know the icons of CD/DVD in my computer.

    Can I have the link to download it please?

    Thanks in advance,

    Nikhil

    No driver is required - Windows have the driver.  Does the BIOS (F2 at startup) to see the drive?

  • I'm under windows7 64 need the 32 bit version of firefox to run Adobe?

    Tried to download the latest Adobe flash will not work, recommend to download your 32-bit version of Firefox? I am running Windows7 Professional 64-bit, yahoo mail and I think that Facebook came out with the 64-bit version? you point me in the right direction on how to sort?

    There are two different versions of Flash, ActiveX for IE version and the version of the plugin used by most other browsers.

    1. download the Setup file of Plugin Flash version here:

    Adobe Flash - Plugin version.

    Save it to your desktop.

    2. close Firefox using file > exit

    Then check the Task Manager > processes tab to make sure that firefox.exe is closed.

    {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

    3. then run the Flash configuration from your desktop file.

    4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

    • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

    See this:

    http://vistasupport.MVPs.org/run_as_administrator.htm

  • Re: Tecra M11 sudennly freezes and the cooling fan starts to run

    My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

    Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
    Clues?
    Thank you

    You must understand that on this virtual path, it is not easy to say what the problem is here.
    I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

    Try to check in the Task Manager, if something like that happen.

    I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

  • Pavilion 17-f260nb: need drivers for Pavilion 17-f260nb for windows7 64-bit

    Hello again,

    I have a laptop of 17-f260nb Pavilion running windows7 64-bit.

    After borrow from someone I came with driver problems.

    I posted on this forum before last year, where wonderful people responded with links for the drivers, but the link no longer works.

    http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/Pavilion-17-f260nb-downgrade-win...

    Can someone point me to the drivers, I need to use?

    USB does not work at the moment, and I see these hardwareid missing drivers

    PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C & REV_03
    PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C
    PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
    PCI\VEN_8086 & DEV_9CB1 & CC_0C03

    Could also someone point me to a driverpage for which I can use the chipset & other drivers as well?

    Thank you all for your support.

    Kind regards

    E.P.

    Hello:

    Here is the link for the usb driver, you must... Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?product=65855

    Now, as to why you couldn't find the drivers on your laptop support page...

    All the drivers, specifications and manuals are missing from pages support again.

    They have disappeared since Friday night.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    If all goes well, now that it's Monday, HP is going to move to fixing the real problem soon.

Maybe you are looking for