Fs7600 and integration of advertisements by several

Similar Questions

• ACS 5.1 and integration of advertisements

  I just installed ACS 5.1 as a virtual machine instance to provide GANYMEDE AAA.  So far, things are working properly with local authentication and now I want my users to authenticate via AD.  Looking at the user guide at page 8-39, looks like I need to create an AD identity store and join the ACS server to the domain.  Is this correct? and the username AD password required a time thing to join the ACS server to the domain or a special account to be established for the Ad Server?

  Thank you!

  Bob

  Yes, that's correct.

  Join the ACS to an AD domain
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1140906

  ACS 5.1 must be configured with a valid NTP server for the time synchronization, preferably from where the domain controller is its time synchronization. Another is a valid DNS server that can resolve internal names.

  Two of them will be configured in the CLI:
  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_use.html#wp1096003

  IP-name server
  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1729536

  NTP server
  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780

  And Yes, the name of user and password admin you use would be a time. It might be an admin account existing, make sure just some admin credentials you use GBA to integrate with AD must have privileges to add the computer on the domain.

  We will never recommend allows you to delete the admin account after integrate ACS with AD.

  HTH

  JK

  The rate of useful messages-

• MBP is overheating and I have to restart several times per day

  Hello

  My MBP is overheating, slowing to a crawl, and I have to restart several times a day (which may or may not help the issue).

  The machine is:

  MacBook Pro (retina, 13 inches, end of 2013)

  2.4 GHz Intel Core i5

  DDR3 4 GB 1600 MHz

  No expandable RAM (which is beyond me why they would make a non-expandable machine. I discovered after I bought it).

  During the day I am running:

  Mail application (with very complete box - this might be a contributing factor? Can I archive the emails registered)

  Safari (with different tabs open, sometimes a lot sometimes just)

  Messages

  EverNote

  Chrome (with different tabs open, sometimes a lot sometimes just)

  ... and from time to time, but not always:

  Overview

  Numbers of

  I'm not game. I'm not streaming video. After a few hours of use, several times a day (often 2-4 times just one afternoon) the machine slows to a crawl and I reboot, which may or may not solve the problem of the speed and the heat.

  I ran the activity monitor utility, and there are applications that I do not sometimes recognize using 11 to 18% of CPU (bird and soangent). Anyone know what here?

  Thanks for all the ideas. I bought this MBP in June. It was the refurb decision-making, where I got all my Macs over the past ten years. It is the worse of them.

  Thank you.

  Bird and soagent are the normal processes of Apple. Bird is one of the procedures used with the synchronize documents iCloud. soagent is used in conjunction with the Messages. In normal circumstances or will require an excessive amount of time processor. If you use Messages with a Google or other account not Apple (in other words, not exclusively iCloud) poor performance could be correlated with these accounts.

  In any event 11-18% seems a bit much for me. Try to uninstall Evernote as well as all Google products. Or the other could possibly conflict with push social agent and / or document the Apple process synchronization. Google is disinterested or impossible to implement effective OS X apps.

  Try to remove all accounts non - Apple Messages, but also completely remove Google from your Mac. You can always reinstall it and Evernote once again after a repair. Your data Google and Evernote is stored on their servers. Back up your Mac in any case, as a precaution.

  Mail application (with very complete box - this might be a contributing factor? Can I archive the emails registered)

  Perhaps. "Comprehensive" is relative. Some people keep dozens or even hundreds of thousands of e-mail messages. The practical limits of some Mail are, I don't know.

  4 GB is perfectly adequate to run El Cap on a MBP of the retina. It would be premature to suspect material deficiencies, but products Google will introduce a new Mac, regardless of its configuration.

  Run Apple Hardware Test to confirm that your exhaust fan MBP works normally. Apple Hardware Test is for Macs produced before June 2013. Later Macs use Apple Diagnostics.

  Read also Mac Notebooks: Apple Support operating temperature: and learn more about your Mac - fans of Apple Support.

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• I downloaded and installed LR and PS (the two CC) several months ago (deskto Win10Pro and they worked very well.)  Now I get a message 'download error.  Please contact Customer Support. "What I have to redo the whole installation (LR, PS and CC)?

  I downloaded and installed PS and LR (the two CC) several months ago (Office Win10Pro), and they work very well.  Now I get a message 'download error. Please contact Customer Support. »

  After pressing the keys [almost] randomly for a few minutes, everything started working again.  It seems now not to be broken, so I won't try to fix it.  Case dismissed.

• I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.

  Help, please

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do th

  I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do this with the same results

  Please follow the steps below.

  1. Follow the Solution 1 and 2 of error: "unable to install". Creative Office Cloud
  2. Install Creative Cloud Desktop Application using Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Hope this will help you.

  Kind regards

  Hervé Khare

• Forms of the muse hosted on BC and integrated in Muse site hosted on third-party host

  I was wondering if there are plans for the forms of the Muse to be hosted on BC and ready to integrate the site of Muse is on a third-party host? If this is already possible... How?  I know of another company that allows for forms (using their program of separate web form) to be hosted through them and integrated into their web design software that can accommodate a site elsewhere... wasn't sure that Muse was able to do this also.   Thank you, I appreciate any help.

  Hi Davz,

  You can use the forms of the Muse on a third party host. But if you create a form in British Colombia and embed it in the Muse, you can not use it on a third-party host. It can be used in British Colombia only.

  Kind regards

  Aish

• Application server and integration server

  Hello
  
  
  What is the difference between the application server and integration server?
  
  That make the latter two are used?

  Application server connects the engine to opmn. This allows to integrate the code base of the application server. Integration server is just the web server. It also uses the connection to the server application as though it must be configured first.

  see you soon
  James

• VCS and integration of Office 365 Lync?

  We have recently moved to Office 365 and include features of Lync for Office Office videophone (as well as IM) but we do not have a Lync server on site to do all the required configurations. Anyone out there experience with the integration of these two products?

  My hypothesis is that it is still possible to somehow, but we will not be able to configure any end point of VCS to vocation user Lync. Is it possible to still have Lync users to call to an endpoint of VCS (which is what I really want to do anyway)?

  My first tests have developed negative did the best that I can with the deployment guide, but I also think I might need to change my domain name to my settings of VCS for a subdomain (as @vcs.mydomain.com), now they are both using the same top level domain name, and I fear that the two systems are not 'find' the other because their research are limited to their respective systems.

  Any ideas or help is greatly appreciated.

  Thanks in advance,

  Chris

  Chris,

  You cannot configure Lync to federate to an environment of VCS in the same way that you can federate to other domains running Lync, this isn't how the integration works.

  The role of the VCS in integration with OCS/Lync is to translate between Microsoft SIP and based on the SIP standard, which is the reason why a or several control devices VCS need to communicate directly with a Director or a Front End Processor. You cannot communicate directly with a low of VCS an OCS/Lync Edge server.

  I'm not familiar with Office 365 and which control this service gives you on your server (if any) infrastructure, but if you look at the deployment of OCS/Lync and setup guide, you must perform the VCS on the OCS/Lync server to trust them and possibly to set up static routes I do not think that you will be able to perform these steps by using Office 365 (please, correct me if I'm wrong).

  -Andreas

• Mapping to an and the other to map several in a single table

  Hi all
  
  I am asked to design a banking application, I the CUSTOMER table where client information is stored. I have a table of ACCOUNT where account information is stored.
  Now a customer can start all 3 types of accounts. (Current account, savings account and FD (deposits))
  
  A customer can have - > only one record chequing account, but may have several FD account. How do implement us this using integrity constraints?
  
  
  
  CUSTOMER-> Cust_name, Cust_phone, Cust_id (PK), Cust_address table
  ACCOUNT-> AccountNo, Acc_type, Cust_id table
  
  Your response is greatly appreciated.
  
  Thank you
  Yvette

  You may need to create a UNIQUE function based index. It works for you.

  create table customer_1 (Cust_id integer primary key, Cust_name varchar2(100), Cust_phone number, Cust_address varchar2(100))
  /
  create table account_1 (AccountNo integer primary key, Acc_type varchar2(100),Cust_id integer references customer_1(cust_id))
  /
  create unique index account_idx on account_1 (cust_id, decode(acc_type,'CA',acc_type, 'SA', acc_type, 'FD', 'FD' || accountno))
  /
  insert into customer_1 (cust_id, cust_name, cust_phone, cust_address) values (1, 'karthick', 0, 'x')
  /
  insert into account_1 (accountno, acc_type, cust_id) values(1, 'CA', 1)
  /
  insert into account_1 (accountno, acc_type, cust_id) values(2, 'SA', 1)
  /
  insert into account_1 (accountno, acc_type, cust_id) values(3, 'FD', 1)
  /
  insert into account_1 (accountno, acc_type, cust_id) values(4, 'FD', 1)
  /
  insert into account_1 (accountno, acc_type, cust_id) values(5, 'FD', 1)
  /
  

• All content tiles missing and integrated PDF reader and password manager no longer works after update to 34.0

  Hello
  After that I updated to 34.0 on OSX 10.9.5 (auto update comprehensive), I noticed that all of the content of the tile is missing. Before the update, I have seen a lot of tiles when I open a new tab. Even after a few navigation, no content appears (I see only an array of blank tiles). I went between white classic, bright, cooler. No effect.

  In addition, integrated in the viewer PDF does not work. All the time I click on the pdf link, I see the window to download the PDF with the title "enter the name of the file to save on...» ». Before the update, PDF Viewer has not worked, no problem. After that I noticed the problem, I checked that the preferences-> requests and confirmed that the action to the 'Portable Document Format (PDF)' content type is set to "Preview in Firefox".

  In addition, Manager of integrated password also stopped working. He remembers no new password. It provides no password already known on the site where he provided automatically the account and the password before the update. I checked the preferences-> Security-> saved passwords. There are a lot of passwords to remember (remember before the update).

  I re - install the firefox manually. It does not help.

  Can someone help me? Is there any information I can provide to sort my problem?

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Equium P200-11R and integrated Wlan

  Hello
  I recently bought an Equium P200-11R. However, I have a problem with the wireless connection. The laptop does not connect to my wireless network no matter where I place it! When I enable it and try to connect it tells me that there are no networks. When I look for the networks, sometimes I can see my neighbours networks. Sometimes I see my network but if I try to connect, it still tells me that not available networks or diagnoses a problem which cannot repair Windows. After spending several hours looking for a solution, I plugged an old Belkin 54 g USB adapter in and presto, I am connected! I always use the Belkin after 8 days because the Wlan on Board will not connect me, (he did briefly to connect to the network once, for about 15 minutes).
  I've been connected wireless for about 6 years with different desktop computers and laptops. For the past 3 years, I was on a wireless router. I configured several PC to work on this network and have also implemented several wireless networks to friends and families, so I hope that now I know about what I'm doing!
  The Wlan switch is active and the orange light comes on. FN + F8 gives me the assurance that the Wlan is on. Device Manager tells me that the card is active and functional.
  The Wlan on board is an Atheros AR5007EG and the wireless router is a BT Voyager 2110.
  As I can connect all the time with the Belkin, I guess the problem is A) a problem of compatibility between the WiFi and the router, or B) the Wlan is defective. I looked in the compartment slot to try to establish if the antenna is connected, but the map is not visible, but it can look different to what I'm used to (does anyone know where is the wireless network card)? (It has Vista installed incidentally).

  I really don't want to take the pc that I now put in up to my needs and it is a very good machine.

  Can anyone help please?

  Best regards

  So it's good that your issue has been resolved. According to me, other people with the same problem could use information to heal their own "disease". :)

  Welcome them

• Move the files, folders, and applications when you use several desktop computers

  I have configured my MacBook Pro to display several different offices, based on several types of work that I do. I'm having two problems: (1) get the apps in the dock to show only in the dock on specific and (2) workstations, get the files and folders to broadcast only on one specific office.

  Re: (1), I followed the instructions from Apple I found online, but all applications in the dock show in the dock on each other in all cases.

  Re: (2), I don't see a menu or option to specify desktop computers. They're showing on all my workstations, which isn't what I want.

  Thank you in advance for your help!

  The Dock is the same, no matter what you are in office. It cannot be configured to display only the items to come on a computer desktop and other articles on others. It is similarly of the icons. An icon that you put on a desktop will appear in all work positions.

  Now you pouvez specify certain applications appear in specific jobs and this applies to the Finder as well so you can have icons of documents and folders appear on a single desktop computer. Other workstations will all show no icons. If you choose this option, you can then open a window to a folder on the desktop that has the Finder, and then move it to another office.

  Before Apple, desktops implemented, there are several utilities which enabled us to operate more as you want, but unfortunately, they are now gone.