ACS 5.1 and integration of advertisements

Similar Questions

• Fs7600 and integration of advertisements by several

  Hi we become FS7600 to replace EMC ns20, now I'm little worried if fs7600 can do what ns20 done for years for example 1) integrate with multiple trusted windows AD. (2) vlan tagging so that we can use the same trunking port to transfer data for several AD. (3) CIFS data deduplication. I know can integrate with the AD, but no where could find the things that worry me. We know if above can be done? A link to the document will be appreciated. Thank you

  Hello

  In the case we want to know

  Answer to my question above the word "NOoooooo.

  Thank you

• WLC / ACS / AD - domain and laptops no - domain (802. 1 X / PEAP)

  Hi all

  I implement a solution based on 4404 WLC, 1113 ACS and Microsoft AD. What I want to achieve is to have two WIFI (SSID), that can be used by users on laptops of the domain, the other can be used by the users in the domain on personal laptops. Field portable computers will have full connectivity, but personal laptops will be restricted.

  I created the two SSID using 802. 1 X by ACS / Remote Agent and can authenticate and connection OK.

  I thought I should have user auth and auth machine for laptops of area but just user auth for personal laptops.

  I have unauthenticated machines go to one group ACS or blocked, but I need to enable them in if they are on the SSID restricted. I can't quite understand how to have two SSID is authenticating with the same ACS / AD - one green and the other.

  I'm on the right track?

  Anyone done this before or have any bright ideas?

  See you soon,.

  John

  With the use of WLAN access based on the SSID, users can be authenticated based on the SSID they use to connect to the WLAN. The Cisco Secure ACS server is used to authenticate users. Authentication happens in two stages on the Cisco Secure ACS:

  1 authentication EAP

  2 resulting SSID authentication of network (NARS) on Cisco Secure ACS Access Restrictions

  For the new designation and configuraiton following URL can help you:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

• Ganymede + auth-proxy on acs 5.0 and later support?

  The nas is 2801 with ios 15.1 and acs 5.3.i want to deploy auth-proxy using Ganymede + protocol.but there no work.using RADIUS is ok.

  I want to know Ganymede + auth-proxy on acs 5.0 and later support?

  Thank you!

  GANYMEDE + Auth-Proxy is only supported after ACS 5.3 patch 5. Upgrade your ACS 5.x or use RADIUS for authentication Proxy.

• ACS, Service access and authorization

  I'm under ACS 5.2 and I'm trying to set up 3 new SSID, which 2 are not guaranteed and 1 which is secure.  I'm trying to understand the best way to allow their evolution on which network they come.  All authentication requests are from the same devices, LAN controllers without wire, so NDG cannot be used as criteria.  I was watching either create 3 Access Services and using selection rules, or by creating 1 Service access and using permission to choose.  However, I can't find an attribute to use for determining what network they came.

  Anyone has a suggestion for the best way to do it?  I have

  Go to the elements of the policy-> Conditions of network-> end of Station filters and create a rule CLI/DNIS that includes the name of the SSID, and then use it as a condition to any rule you create for authentication. The SSID will be preceded by MAC address, then enter * ssidname (i.e., match whatever it is before the name SSID, then match the SSID). For example, if the SSID is called lab, then you must enter * lab.

  Then go to access-> Service selection policies and create a service selection rule that has end Station filter as a criterion.

• ACS 5.4 and Juniper J-Web

  Hello

  I have set up a box of the ACS 5.4 and will test the devices on it.

  Cisco and Juniper, both works well with GANYMEDE

  I can connect both the use of SSH or Telnet but my problem is the Juniper J-Web GUI

  I can't access the J-web no problem with the root account.

  I can't seem to make it work, no matter what I try. Here is my shell of the GBA box

  

  And the following configuration of Juniper.  I tried to bind the local-user-name attribute to the remote and remoteadmin with no luck. Anyone got any ideas how I can fix this problem? Or if its even possible?

  version 9.6R1.13;

  System {}

  host name of Juniper-pare-fire;

  authentication-order [tacplus password];

  {root-authentication

  password encrypted "$1$ $1tRuy9o2 LwSPxNwe4XGNMOMIMo1pd1"; # SECRET - DATA

  }

  {tacplus-Server

  10.251.200.25 {}

  secret ' $9$ zaUL6/AtuOIRS5QF/CuEhws2 "; # SECRET - DATA

  Timeout 10;

  Single-connection;

  }

  }

  accounting {}

  events [connection change-journal interactive-commands];

  {destination}

  tacplus;

  }

  }

  {Login

  the user admin {}

  UID, 2001;

  root class;

  {authentication

  password encrypted "$1$ MNUZBLFW$ X2sJL/UTgRYcgBNV4RLe.0"; # SECRET - DATA

  }

  }

  user remote {}

  full name of the "remote user";

  UID 2025;

  operator class;

  }

  the user remoteadmin {}

  full name of "Remote Admin";

  UID 2026;

  root class;

  }

  }

  services {}

  SSH;

  Telnet;

  Web-management {}

  {https}

  System - certificate generated;

  interface fe-0/0/0.0;

  I worked on almost similar issues today and he confirmed that he is able to access J-WEB with the credentials of Ganymede. You can check the config here: https://supportforums.cisco.com/message/3953224#3953224

  Through your config it seems that you have not defined/created classes as he did:

  for example:

  {Login

  class CLASS Number {}

  permissions [view configuration];

  }

  class CLASS RW {}

  permissions in full;

  }

  user {JUNOS-RO

  UID 2000;

  Jatin kone
  -Does the rate of useful messages-

• ACS 4.0 and IBM TSCM

  Hello

  I try to load the attributes of the CNA for IBM Corporation (TSCM) of the FTP (the attributes of the NAC management), but these do not appear in the system

  Configuration-> Configuration-> CSV connection failed attempts Configuration or CSV file past Authentication Configuration file.

  My server is ACS 4.0 device. On ACS 3.3 my attributes of the NAC is working well.

  [attr #0]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00020

  attribute name = political Version

  Profile attribute = off

  type of the attribute = string

  [attr #1]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00021

  name of the attribute = number of Violation

  Profile attribute = off

  type of attribute unsigned whole =

  [attr #2]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00010

  Action = attribute name

  Out = attribute profile

  the attribute type = String

  I loaded the list with attributes for Symantec on ACS 4.0 and it is OK, but for Tivoli Security Compliance doesn't work.

  Please help me if you have a solutions!

  Thank you!

  Hello

  Well Yes, you can't have a space between the name of the seller, I case that after loading the file I do not have the attribute of the GBA unit, but can see logging. After the reboot of the ACS that's ok.

  I also, can deployment of the NAC with IBM TSCM, you share the experince? What version of client TSCM, we should use? I can't get the 5.1.0 version but it looks like no need version 5.1.2 above only can patch the last update.

  Thank you

• Problem ACS 4.0 and Server RSA Token

  Hello

  We are having a problem trying to get 4.0 for Windows GBA authenticate users on a Server Token RSA wireless.

  Our Cisco 1200 AP series is configured for WPA2 and LEAP Authentication. He points to the ACS server for RADIUS authentication. Now, it works very well for users with a static password defined on the internal database of GBA. However, for obvious security reasons, we? d as the transmitted authentication to our server internal RSA.

  I installed RSA Agent on the same server as the ACS along (after adding the sdconf.rec file in the System32 folder). The RSA server was added to the ACS external database and a user configured to use the Token RSA server for password.

  When we try to authenticate, the ACS fails the attempt with reason? External DB passes invalid?. The same user can authenticate successfully during the use of the RSA test authentication tool that is installed on the ACS server under the RSA Agent software.

  After running some debugs a pix in front of the servers, I see traffic to and from the servers when you use the test tool (that works), but it looks like GBA doesn't? t even send traffic to the RSA server during authentication.

  Any help or advice appreciated.

  Thank you

  no no no no! Do not use EVER of RSA with WIFI + PAP.

  The token + pin can be sniffed and is good for 60 seconds... on the Wifi which is disastrous.

• Forms of the muse hosted on BC and integrated in Muse site hosted on third-party host

  I was wondering if there are plans for the forms of the Muse to be hosted on BC and ready to integrate the site of Muse is on a third-party host? If this is already possible... How?  I know of another company that allows for forms (using their program of separate web form) to be hosted through them and integrated into their web design software that can accommodate a site elsewhere... wasn't sure that Muse was able to do this also.   Thank you, I appreciate any help.

  Hi Davz,

  You can use the forms of the Muse on a third party host. But if you create a form in British Colombia and embed it in the Muse, you can not use it on a third-party host. It can be used in British Colombia only.

  Kind regards

  Aish

• Application server and integration server

  Hello
  
  
  What is the difference between the application server and integration server?
  
  That make the latter two are used?

  Application server connects the engine to opmn. This allows to integrate the code base of the application server. Integration server is just the web server. It also uses the connection to the server application as though it must be configured first.

  see you soon
  James

• Replication of ACS and integration with the Active directory database

  Hi all

  I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

  No need to give the IP of two ACS. Give the primary IP of ACS.

  Kind regards

  ~ JG

  Note the useful messages

• Approval of area ACS 5.3 and AD

  Hello, I m having this problem:

  I have 2 AD areas are 2 different forests (e.g. domain1.com and domain2.com) and they have been configured to trust each other (two-way).

  In the AD environment, it works fine.

  The problem is that in ACS, which is integrated with domain1.com can´t see the other domain2.com domain groups.

  If I look for them under Directory groups Don t appear and if I put them manually in the name of the Group (with the domain2.com/Users/GroupX syntax) and then I add with Add ^ button I can't add them and use them in the policies but they don t work (I get an error and nothing is authenticated).

  I m using ACS 5.3.0.40.5 version and Windows 2003 server enterprise edition.

  I ve read this post

  https://supportforums.Cisco.com/thread/2064843

  but I couldn t get it to work.

  If anyone knows how I can get this working I will really appreciate it.

  Thanks in advance.

  Kind regards.

  I would like to know if there is anything else I can help you and how everything is going.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• ACS 5.1 and several areas of AD

  Guys I have ACS 5.1 running on a VM Instance.  I was able to add the ACS server to my AD domain and it's working properly.  However I have other users in another domain I want to use the ACS server to connect to devices.  Is there any way to connect to two different areas of advertising of this server.

  Thanks in advance,

  MikeP

  Hello

  In ACS5.1, you can only attach one area which will join ACS.

  Thank you

  Waris Hussain.

• ACS 4.1 - LDAP integration

  We want to use ACS as raduis server and use it to authenticate the VPN users

  Remote access VPN user--->---> ACS v4.1---> LDAP ASA5510

  ASA is already configured for the VPN, I'm a newbie with ACS. Can someone explain how to configure ACS as radius server and integrate it with LDAP.

  When a user enters his user name and password, the SAA should send that ACS and ACS should compare to LDAP.

  Thank you

  How to configure ASA to Radius configuration and VPN authentication

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#CLI

  How to configure the ASA on ACS as a radius client:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#ACS

  Check the authentication Test between ASA and ACS

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c18ff.shtml#Veri

  ACS and the LDAP integration database

  

  After that set the host name (such as the LDAP server's IP), Port 389 and Admin username and password.

  Kind regards

  Jousset

  The rate of useful messages-

• All content tiles missing and integrated PDF reader and password manager no longer works after update to 34.0

  Hello
  After that I updated to 34.0 on OSX 10.9.5 (auto update comprehensive), I noticed that all of the content of the tile is missing. Before the update, I have seen a lot of tiles when I open a new tab. Even after a few navigation, no content appears (I see only an array of blank tiles). I went between white classic, bright, cooler. No effect.

  In addition, integrated in the viewer PDF does not work. All the time I click on the pdf link, I see the window to download the PDF with the title "enter the name of the file to save on...» ». Before the update, PDF Viewer has not worked, no problem. After that I noticed the problem, I checked that the preferences-> requests and confirmed that the action to the 'Portable Document Format (PDF)' content type is set to "Preview in Firefox".

  In addition, Manager of integrated password also stopped working. He remembers no new password. It provides no password already known on the site where he provided automatically the account and the password before the update. I checked the preferences-> Security-> saved passwords. There are a lot of passwords to remember (remember before the update).

  I re - install the firefox manually. It does not help.

  Can someone help me? Is there any information I can provide to sort my problem?

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox