FTP file transfer

Similar Questions

• Of NI 9802 FTP file transfer

  Hi all

  I am trying to transfer files from data stored in a module NI 9802 (using maps of SD Transcend 2x2gb) mounted on a cRIO 9074 I am facing a problem, very frustrating with my FTP, TCP/IP connection. I will try to be as complete as possible.

  First of all, I know that I can save the data successfully in the SD card as I have full access via ftp://xxx.xx.xx.xxx/u :/, where u is the drive letter assigned to my card. While the ftp windows Explorer I can read, save, move, delete the files in my SD card with no problems at all.

  My problems when I try to do it programmatically using the intermediate features of Labview 2009 FTP. I have attached my test screws for your attention.

  The RIO.vi (running on my cRIO) is the mounting of the SD card, then waits until I press the stop, without disassembly of the map button. I'm pointing this out just to show that the Board IS mounted, while I'm trying to tranfer my files. The host.vi is one running in the local pc and is used to transfer my files via a TCP/IP connection. I put passive FTP connections (had this problem of the active-passive front). I'm in this VI after that I ran the RIO one... Note that while the RIO vi mounted the SD card, I can perform easily all kinds of operations on files in the SD card either windows FTP FTP MAX.

  My host.vi works very well when it comes to list just the files in my SD cards (using, FTP directory list VI, see attachments), however, if I try to copy my files (using FTP retrieve several VI, see attachments) from the SD card to my local PC, I get the following error.

  Error 66: Retrieve the TCP writing in NI_InternetTK_FTP_VIs.lvlib:FTP Command.vi:4-> NI_InternetTK_FTP_VIs.lvlib:FTP [TYPE] .vi-> NI_InternetTK_FTP_VIs.lvlib:FTP Open Data Connection.vi-> data NI_InternetTK_FTP_VIs.lvlib:FTP Receive.vi-> .vi [RETR] NI_InternetTK_FTP_VIs.lvlib:FTP-> NI_InternetTK_FTP_VIs.lvlib:FTP Multiple.vi-> Download_files_from_RIO.vi

  I searched for this error and people seem to be agree that this error is related to TCP/IP in Windows connection problems... Apparently, windows try to establish a connection, but after not get back all the data for a while they cling. However, why am I able to list my files without a problem?  

  It has to do with permissions? If Yes, then how I can change permissions for SD cards options in the NI 9802 module. Your help would be very appreciated...

  Thanks a lot for your time,.

  Harry

  Hi Mike,.

  Thanks for a quick reply. I just managed to solve my problem. I don't know if it was because of your suggestion. Here's how I solved it.

  Used for working with the intermediate FTP functions, I don't even worth as audit - is those. So basically using the 'library' FTP get several files function I now have a fully functional system. For future reference I added my final vi. Note that in this VI I'm everything first transfer my files using the library function of FTP files and then I use the sequence FTP intermediate FTP Open - Logon - delete files - FTP close to get rid of all the files in my card. For some reason, delete the works this way; but copy them does not...

  Thanks again, Mike.

  Harry

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/

• can binay file transfer is possible with the FTP adapter.

  Hello
  
  can binay file transfer is possbile by FTP adapter.if yes.then please suggest me how.please let me know

  Hello

  Binary Yes is possible:
  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_file.htm#CACCBECF

  How to:
  read this
  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_file.htm#CACCACGH

• Can a large file transfer solution be designed using BITS?

  Gurus!

  I need your help to design a large file transfer solution. I need to transfer files from a network of about 70000 PCs in a central records repository. The size of the files must be transferred to the PCs range from 10 MB to 2.5 GB. Is it a good idea to use the background intelligent transfer service (BITS) to transfer? Or is it better to use a custom or off the shelf solution FTP (such as IBM managed file transfer) for this? If I use LOCKS, what are the advantages and disadvantages?

  Please let me know gurus!

  Novice kid

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• During the update 1.3 ISE file transfer problem

  We have the problem by running the upgrade command:

  iseadm01 / admin # clean up upgraded application

  Application upgrade cleaning directory of successful preparation
  iseadm01 / admin # application upgrade preparation of ise-upgradebundle - 1.2.x - to-FTP 1.3.0.876.x86_64.tar.gz

  Get the package to the local computer.
  File transfer error %
  iseadm01 / admin #.

  The sniffertrace shows that the ISE 1.2 sends TCP RST after about 30 MB of file transfer. If we run them several times order, it stops exactly after the same number of bytes transferred.

  The utilazation disc looks OK:

  iseadm01 / admin # dir

  Disk directory: /.

  16384 sep 18-2014 15:55:48 lost + found.

  Use of disk: file system
  total 172761088 bytes used
  14275047424 bytes free
  15234142208 bytes available
  iseadm01 / admin #.
  iseadm01 / admin # dir

  Disk directory: /.

  16384 sep 18-2014 15:55:48 lost + found.

  Use of disk: file system
  total 172761088 bytes used
  14275047424 bytes free
  15234142208 bytes available
  iseadm01 / admin #.

  We have an other ISE (node monitor) and the problem is the excact same on this node.

  Thank you

  I've updated two deployments today - one on virtual machines and other devices of series 3400 ISE. Both transferred images OK.

  I found it easier to transfer files separately via FTP.  Then, I created a repository pointing on the disk and that referenced in the upgrade command.

  I've seen reports of servers ftp transfers on Windows (with WS - FTP or IIS) to 30 MB limits.  I used the ftp server Filezilla on windows laptop and it worked very well.

• How to publish HTML files exported with Go Daddy file transfer Panel?

  I am a beginner with Adobe Muse, so I have no experience with it whatsoever.

  All started with Muse. No experience at all with it.

  Fusion of objects Net (NOF) used so far. With the NOF software, I had to publish the HTML files in a "flat" structure, which exports all files in a single foldrer. No other records inside. Then I download all the files in the Panel of Go Daddy File Transfer, without any problem. But in the Muse, the files are exported in a folder with many files inside. Thus, when I download the exported Muse html files in the same way, the exported site is not displayed correctly. It says "files are missing. It's as if she's not read all the files I downloaded. It seems to only read one level. All other files in the folders

  When I had similar problems with NOF like this before, I had to publish the files in "flat site structure. Then the problem is solved. But in Adobe Muse, there is no way to publish the exported files in a "flat" structure. So what I am doing wrong? Help, please. Thank you

  Use the built in FTP in Muse.

  In the upper right corner, click on 'Publish' and select 'FTP host'

  

  You will then get a new dialog box where you enter your GoDaddy FTP account information.

  

  And then it's as simple as hitting the publish button when you want to update your site. You don't need to make it through the Panel of GoDaddy file transfer. This is the way strong and open to too many potential errors.

• resume file transfer

  file transfer resume?

  DW does do this?

  I keep getting kicked off a remote connection and you have to start over.

  As far as I KNOW not.  If you get a lot of down time during long sessions of data transfer, try using a dedicated as Cute, WS_FTP, or Filezilla FTP commodity.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Using SFTP or FTPS to transfer recordings?

  Hello
  
  Anyone used SFTP or FTPS to configure settings for Contact Center records anywhere file transfer? Any back and donts?
  
  Thanks in advance.

  Supported file transfer protocols:

  Web Storage servers:
  AT·

  FTPS

  SFTP

  Copy of files

  Background for storage servers:

  AT·

  SFTP

  Copy of files

  We have never implemented the FTPS Protocol.

• Mini Mac server - attachment of external hard drives file transfer speed

  Hi guys!

  I wanted to increase the speed and storage capacity to transfer to my Mac mini file, so I bought a box of external hard drives. The one I bought is: http://www.icydock.com/goods.php?id=219

  Built-in the Mac mini hard drives transfer the file to 60 MB/s (writing and reading) and I wanted to get better speed of file transfer, so I bought an SSD that is going to be inside with an another HARD drive of 3 TB for archiving my files. The housing is connected by USB3.0 (5 Gb/s) for the Mac mini.

  [SSD-> files I opened every day] - speed around 550 MB/s write and 500 MB/sec in reading

  [HDD-> Archives, files that I have does not open very often] - speed around 150 MB/s write and 150 MB/sec in reading

  So I did some benchmarks on my new Setup, and the speed is not really what I expected. Transfer of file max speed I have achieved is about 100 MB/sec in writing on the external SSD plugged into the mac mini. This transfer has been filed since an iMac 21 "2011 with an SSD (with almost the same speed read/write than the box) so it's quite disappointing.

  It is possible that the Mac has a 'file transfer speed limit' is somewhere? Or whatever else that could affect that?

  More information on my setup:

  Mac Mini server 2012 - 2 TB RAID 1 - Mac OSX 10.9.5

  iMac 21 "2011 - Crucial SSD 275 Gb - Mac OSX 10.9.4

  IcyDock external enclosure - 4 bays, USB3 5 Gb/s

  -Red WD HDD 3To

  -Crucial SSD 1 TB

  Together internal Gigabit Ethernet network

  Thank you!

  Was perhaps Spotlight indexing external at the same time, the test has been done?

• File Transfer issue between 10.4.11 + 4.4 Android phone

  Hello.

  I recently got a Polaroid link 6 "A6WH smartphone, Google Android KitKat 4.4 running, and despite being told of Polaroid that I should be able to transfer files (ie. photos, music, videos) between this phone and a G4 aluminum PowerBook running OS 10.4.11 (old, Yes, I know!), I can't. I was told that I have to download Android File Transfer, which I did, but it didn't work (it only works on OS 10.5). Android File Transfer is Version 1.0 - I don't think that there is no earlier version.

  I tried to search on this forum and elsewhere online, some have suggested other programs, such as AirDroid, but when I tried to download them, they would not work with OS 10.4.11.

  I was able to transfer files over a Bluetooth connection - and only from the computer (and not vice versa). The USB cable provided with the phone doesn't seem to work (anyway) without a program to make it easier.

  Any suggestions for transfer files (ie. photos, music, videos) between these devices - via the USB port, or even simply through Bluetooth, back from the phone to the computer?

  Also, are all the programs available to convert video to MP4 format files, as I can't get the phone to open any other format - BTW, free is better!)

  Note: I would have gotten an iPhone, except for the fact that we tried to get rid of some AirMiles points that were about to expire, and they have not one!

  Thank you

  I have (and have had) smartfones non-Apple for some time

  To transfer ALL kinds of files, I just use an intermediary "cloud service".

  Many here will advise you http://dropbox.com/ as a reliable and free service

  * NOTE: Dropbox is more supported by OS X Tiger with their desktop app - but access via the Web site is not affected (I use TenFourFox: a fork of Mozilla Firefox ESR 38 for Power Macintosh and Mac OS X Tiger PowerPC as a browser)

• Just upgraded to El Capitan 10.11.4 and now Android File Transfer no longer works

  I just upgraded to El Capitan 10.11.4 and now Android File Transfer does not work. Does anyone else have this problem?

  See this link

  http://trendblog.NET/Android-file-transfer-not-working/

  and this alternative

  https://www.iSkysoft.com/phone-transfer/Android-file-transfer-for-Mac.html

  the result is if Apple broke it is the Android dev team to fix it-not just but it of how Apple rolls and won't budge on that, it's same in their EULA, section o. in the case where you think that they be unfair and wish to continue.

• File transfer a BIG bug! Amazing transfer slow and full bandwidth used!

  I read about this since 2014! How Skype does not solve this problem yet? Amazing!
  I am transferring files between 2 PCs on Win7 64 bit and latest Skype (update), full bandwidth of 1.5 Mbps downloading (and I am sure is that Skype to use 100%!) and one day calculated for the transfer of 250 MB! It goes like a turtle! What the hell Skype is the download otherwise files?
  
  Horrible, please fix!
  Thank you

  Transfer of cloud of image files is not yet implemented on Office of Skype for Windows. File transfer is always P2P.

• How to set the location of file transfer by default for the Skype file transfer?

  With the latest version of Skype for Windows Desktop Skype version 6.22.81.104. I can't find the location of default file transfer settings, let me know how to manage these settings.

  http://community.Skype.com/T5/Windows-desktop-client/got-a-problem-when-download-some-files-from-sky...