FTP problem with just 1 host

Similar Questions

• vSan with just 2 hosts?

  Hi all

  I am currently on a trajectory of vcp - VTC 6 and covered only briefly in the vSAN.

  I'm really looking forward to try this at home, but the problem is that I have only two servers (HP Gen8 MicroServer)

  I have seen that it is possible to nest hosts esxi etc but is it possible to use two medical examinations?

  Thank you!

  mattg1,

  You can work with just two hosts or even a single, if you change the default storage policy to include force_provision set to true, depending on what stage you are at the. You will have a second replica on his own diskgroup, but if it's just for a laboratory at home for educational purposes which will be very well. VMware refers to this a strapping 'start-up' and you will see that it is actually supported during the construction of a new cluster (greenfield) where vCenter has not yet been yet (emerging) installation. In other words, you can build a host in a cluster VSAN just so that you can configure vCenter Server and then add the rest of the guests (if any) as soon as vCenter is up and running.

  «By boot strapping Virtual SAN without vCenter can fill this gap and remove the obligation to have storage high availability or temporarily on the local drive to day - zero operations.» This could be applicable to a greenfield deployment scenario. »

  Excerpt from https://www.vmware.com/files/pdf/products/vsan/VMware-TechNote-Bootstrapping-VSAN-without-vCenter.pdf , September 30, 2015.

• Problem with once self-hosted

  Hello, I have a problem with once self-hosted.

  Let me explain by step because my English is not very good

  1. I bought the police Cadiz of Luzi type in web and desktop format.

  2. the Office format work well on all my programs adobe (Indesign, Illustrator, Photoshop etc.)

  
  

  3. I'm throwing Muse

  4 I install the webformat (svg, woff and eot)

  5. it works but I have to match all the fat police with the office format.

  
  

  6. all works right but Muse is not recognized the fat of the regular police force since the office format. So I can't use the font as a system of Police (Export as an image) and also as once because I can't match the ordinary grease with the format of office.

  

  
  

  If anyone has a solution I'll take.

  Sorry for my English, this is not my first language, I'll put a screenshot to make it clearer for you.

  Thanks for your time

  Hello

  Please check on the below mentioned thread where same question was discussed and answered correctly,

  Please try to do the same thing on your side as well, hope this will help you.

  Here is the link - Self-hosted web fonts. Police/Office of missing system. Police not appearing is not in the list.

  Best regards

  _Ankush

• I have a problem with the task host .exe.

  I have problems with slow stop caused by the task host. I downloaded the fix buy it will not be installed. I get a message that the update is not applicable to my computer. I have a Toshiba A105-S4384. Any suggestions on how to get the fix to install?

  If the hotfix is not installed, you can try compatibility mode. If you are still unable to fix, you can do a reinstall of windows and it will certainly solve the problems you are having.

• Problems with the new host VMware ESXi 5.0

  We have a dell blade chassis, with 4 710 blades and 8 610 the 710's have 12 network cards and the 610's have only 6 network adapters. I added a new host on one of the 610's and two network adapters in each of the networks belonging to virtual infrastructure. 1 mgmt 2. ISCSI 3. vmnetwork

  My problem is that the new host can see all the resources but I can't move the VM from the hosts to the host 610 710. I get an error because nic 2 on the 710 host is not in the same network as nic 2 on the 610. It seems silly that I wouldn't be able to do that just because the hardware is not identicle.

  I have three vswitches, vswitch0 for management, vswitch1 for the iSCSI network of shared storage, vswitch2 for the network of the vm.

  Thanks for any help.

  Steven Reeves

  Systems engineer

  Shasta College

  [email protected]

  Material is not identical not should not have an impact.

  The vSwitch port group to which are connected the NICs in question is named identically on both hosts?  If they have a different name, vSphere considers different networks.

• vCenter complete with just 2 hosts database?

  Last week, my vCenter Server broke down 3 x.  As far as I know, the SQLExpress database hit that's the limit of 4 GB.  No problem, I'll just follow the operation here:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1025914

  Unfortunately, that released only 10MB.  Then, of course, less than a day later we are back to where we started.  Then I ran this:

  http://blogs.VMware.com/kb/2010/09/dealing-with-vCenter-41-database-tables-growth.html

  After deleting (?) the VPX_EVENT and _VPX_EVENT_ARG tables, I restarted the box and we are at the top (for now).

  As someone who has * no. with SQL experience, how will I know how I have now in my VCDB of free space, and more important again, what is causing it fills?  My best guess is that we use vReplicator Vizioncore (not buying it), that could generate many events, but I have no way to check it out and they say to me "you must call VMware."

  Suggestions appreciated!

  You can also check your statistics in vCenter.  The more statistics, more your DB level could get.  In addition, you can watch the maintenance tasks to help keep this DB under control.  I can't Express, but when you are in the properties of the DB, see if you have a recovery model, if it is something other than the simple, to change.  Also, I posted a KB above which will help with your transaction logs.  These tend to be the largest part of the size of the DB instance.

• FTP problems with the linux ftp server

  Hello

  I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:

  Cannot download the file ' / opt/log/sislog.log'.
  Check if the local and remote path exists and is read and write respectively.

  The system does not have the specified path.

  error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.

  Here is the list of the repertoire of the LUX machine:

  root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
  -rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
  -rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
  -rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
  -rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.log

  Any ideas?

  Hello

  Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.

  The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.

  See you soon,.

  Cheggers

• So I need a 2nd CC account bought 3 PC. But problems with just 1 email address

  Hello
  
  

  I currently have a CC account (all apps £46.73 / mo) running on 2 computers. I have just purchased a 3rd computer and wants to buy a second account CC (photography £ 8,57/mo) for the computer number 3.

  
  

  But when I try to create a new account, I get the message Year Adobe ID with this email address already exists.

  
  

  What is the correct procedure to get the 2nd account for the 3rd machine using the my and only email address?

  
  

  Thanks in advance
  

  You don't really need another subscription... Sign out of your account on A or B and sign into your account on c... then go OUT on C to sign IN back on the A or B to use this computer again

  Learn how to enable or disable Adobe applications

• Problem with RDS Congiruring host

  Hello

  I am using Windows Server 2008 R2 to configure my RDS host. I'm trying to install VMware View Agent: product - 6.2.0 - 3005627 x 64 Version, but when installing this Agent, I don't get any window of custom configuration for register this Agent view with the login server. (PFA: the window below is not). Could you please suggest what needs to be done on my side.

  The other features like linked Desktop Pool, thin App work correctly. Need your help please.

  

  During the installation of the Agent, have you selected the View Composer function? If you use no composer then do not install this feature and you will be prompted to register.

• Problem with moving of hosts with EVC cluster active

  I have 3 servers Intel cluster with EVC mode.

  I don't have a server in the cluster, and it is exactly the same as a single server in cluster (E7320 CPU)

  When I try to move this clustered server I get the error: the host CPU hardware does not support CVS on cluster?

  Thanks on help

  Have you already double check the BIOS settings. Intel-VT, Execute Disable Bit... This should be the same for all hosts.

  Are the hosts of the same provider? Same models =?

  André

• Problems with FTP in Dreamweaver 4 connection

  I hope someone can help me with the following:
  
  Recently I can only connect to the host FTP in Dreamweaver once per day.
  
  I have two sites defined in my Dreamweaver 4 and before I was able to connect several times a day the two don't sites - no problem.
  But now he connects once and then what is trying to connect to the other set of site or maybe some time later on the first site again (where I connected on the same day already) I get the error message: "error FTP - connection to the host cannot be madet.
  Basically it now always only will link every day once.
  
  Anyone any idea what is the cause?
  
  Thanks a lot for your help.
  
  

  These issues are more often associated with your firewall. Please try
  Turn it off completely.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "NicknamecomputerABC" wrote in message
  News:g5f3d6$4P1$1@forums. Macromedia.com...
  > I use Windows XP.
  >
  > Use passive FTP mode (it is checked, when connecting works)
  > but also tried unchecking it, still the same error message.
  >
  > Yes, contacted my host.
  > Actually just changed hosts and the previous one, where the same problem
  > started earlier, has not helped, said something like, this is the
  > 'CAP in Dreamweaver' - although this makes no sense, I
  > think,.
  > as it was working before long?
  > Also contacted my new host, a little more willing to help, had me check
  > many things (also ongoing enforcement 'command' to see if I connect to them)
  > server and I did.
  >
  > Use an AVM FritzBox (but also used this one when everything worked without)
  (> problems), there also now active FTP IE to port 21.
  >
  > What I find strange is that it connects, but not more than once
  > a
  > day longer.
  > so the parameters must be right.
  >
  > I use AVG antivirus, but also tried not to use, or do not use
  > their
  > shield (firewall) but still the same.
  >
  > I also tested a third-party client FTP (FileZilla) but I'm
  > get
  > the following message appears:
  > Status: connection established, waiting for welcome message...
  > Error: could not connect to the server
  >
  > So could not even connect with FileZilla once.
  >
  > Not sure where I can see the FTP log window? (Or is it the message above
  > of FileZilla?
  >
  >
  > Thanks for your help.
  >
  >

• Problems with CDM - Tracert displaying a line and connection with FTP problems

  I am currently in a class of networking and server, so am pretty new to this.  I'm running a virtual PC with Windows 7 Professional 32-bit and a few problems with my command prompt.  When I use the tracert command, any URL that I use, it returns only a single line.  It also does not matter whether I run it as administrator.  Here is an example of what it returns:

  I also have problems to connect to a server by using FTP.  The mission was to connect to the FTP server of NASA and practice to transfer images on.  I am able to connect, but as soon as I use the 'ls' command that I am, it will expire or say "connection closed by remote host". I encountered this same problem on my PC at home on a regular basis as well.  I used a computer friend, followed the exact same steps and it worked very well on his own. Here's what I saw:

  Any help would be appreciated.  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I paid with Paypal, which is linked to my debit card and already wait two days.

  Thanks to the community

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Dreamweaver CS3 - problem with FTP.

  Dreamweaver CS3 problem (version 9.0 build 53)-with FTP. I took my host FTP connection settings and try to put them in Dreamweaver - it download my site only partially. If I use the same settings on FileZilla FTP - it download the site as intended. What is the problem with my Dreamweaver FTP?

  Sorry for my English.

  Thank you for your attention.

  Nikolai

  Dreamweaver CS3 is a very old program. 8 full behind versions. It is likely that the DW FTP is obsolete and does not support connections to the host.

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek