Problems with FTP in Dreamweaver 4 connection

Similar Questions

• Problems with FTP of Dreamweaver and Yosemite [subject edited by Moderator]

  (Newly) installed Dreamweaver does not recognize my server (ftp.jakkoke.com). Check the firewall (no problem), other ftp programs that work fine, old version of Dreamweaver - works but not with Mac os 10.10 Yosemite. Implemented irs.guv - new Dreamweaver communicates with this and other FTP sites very well. Uninstalled and reinstalled twice. What should I do?

  Hi jekoke,

  Please follow the steps mentioned below:

  1. Quit Dreamweaver runs.
  2. Go to the Spotlight (magnifying glass icon on the far right of the menu bar) and type "keychain". Locate the "Keychain Access" application, then click on to start.
  3. In Keychain Access, you should see a list of keychain items.  Look in the 'Name' column for an affected item named with the name of the Site from your site. It will look something like this: ' sitename-SiteServer 0. It will also say 'application password' in the column 'Genre '.
  4. Click the item to select. You should see a few properties of the Keychain item appears at the top of the Keychain Access window. As a double check, make sure that the value for the 'account' is the name of the FTP user.  If this isn't the case, then you can have the wrong item.
  5. Once you are happy, you have the correct item, and it is selected, press the delete key to remove it. Leave the application open for now.
  6. Start Dreamweaver, go to the "Manage Sites" dialog (Site > Manage Sites...) and modify the affected site. Click on the servers section and double-click the server in the list to edit it.
  7. Enter the FTP username and password, and then click Save to close the editing server box and click on save again to close the site box.
  8. You should now see that a new element of Keychain has been created in Keychain Access (it must have the same name).
  9. You can quit Keychain Access and Dreamweaver now and then restart Dreamweaver and check if it works now without having to re - enter the FTP details.

  Please let us know if you still face problems.

• Hi, I have problems with FTP in dreamweaver CS4

  I have a problem downloading from a new site to my host using CS4. I get the error message is the following. An FTP error occurred - cannot connect to the host. Your login or password are incorrect. Please check your login information.

  So far, I have,

  Double checked my login/password etc to the host.

  Change password and tried re

  Interestingly, I have already downloaded two previous sites of the same machine with the same CS4 to the same host (123-reg)

  Help!

  I have a little ftp host it is www.sitename.com, of just other sitename.com.  IThink you'll find, it's something simple, an extra space, a www when it doesn't, a cap where it is not supposed to be...

  This isn't a correct subdomain?

  Gary

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Dreamweaver CS3 - problem with FTP.

  Dreamweaver CS3 problem (version 9.0 build 53)-with FTP. I took my host FTP connection settings and try to put them in Dreamweaver - it download my site only partially. If I use the same settings on FileZilla FTP - it download the site as intended. What is the problem with my Dreamweaver FTP?

  Sorry for my English.

  Thank you for your attention.

  Nikolai

  Dreamweaver CS3 is a very old program. 8 full behind versions. It is likely that the DW FTP is obsolete and does not support connections to the host.

• Problems with FTP - connected successfully but the site does not update.

  Hello

  I was in need of an update to my site and see now having problems using FTP Dreamweaver CS4.

  I had to reinstall Dreamweaver on my system (as also, need an update). And had to remind myself of all the information that must be entered in Dreamweaver. However, this is not where the problem is, I can successfully contect to my host and load the files on the server, but then I reload my page of website and nothing has been updated. I tried numorus attempts to solve this problem on mine but without success.

  Is this a bug with CS4? Or should I use an external FTP program such as FileZilla?

  Any help would be appreciated.

  > Would it be the only thing that would cause me problems?

  No, it could also be your local site definition. If your local site root is set to the level of the fake, so files don't download to the right folder either.  Can you show us a screenshot of your local site definition?

• problems with hp printer photosmart d110 - connectivity

  More often than otherwise, I'm going to print to this printer from one of our laptops wireless and it won't print.

  Whenever this happens, and I run a wireless test, the printer is still fine.

  The printer appears in my devices window and seems to be fine.

  Troubleshooting never translates into a response.

  Usually, when this happens, the spooling print window that displays the status of print jobs says that the printer is offline.  I removed the checkmark next to "use printer offline" last time it was is past, and that it's worked.  I had tried before anything will do, but thought that perhaps it has been fixed once for all this time.  Especially since I saw in another post this fixed the problem of someone else.

  Tonight, it doesn't print, says nothing about being offline, but just says: "error" in the status column.  No other information.

  At the top of the list in the window where I can put as a default value, select this option for use in offline mode, etc., the word 'connect' appears.  It is not an option... the word is gray when all the other words are in black characters, and clicking it has no effect.

  I can always choose the printer of course, he sees the laptop on the network and it seems normal until you try to print.

  It doesn't seem to matter what laptop that I use, I'm having this problem with both.  I also had problems similar with this printer using any other wireless and portable.  So I don't think that it's the laptop, operating system, or anything with the network, just the printer itself.

  Suggestions?  I wish that there is a quick fix.  I'm starting to think that it is defective.

  Hi SRS12,

  Is model # D110 you printer a or b?  Here are some steps I take for a quick solution when a printer was working wireless and suddenly quit.

  1. Make sure that the print queue is empty.  If delete you it, or if it was already empty and you can not print, take the next step.
  2. Download and run HP Print and Scan for Windows doctor.  If there is no change, go to step 3.
  3. Reset your wireless network, as described in the following link.  Click here

  Let me know the results.

  Good luck!

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

   

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Problem with Safe Mode, no internet connection

  Whenever I start in safe mode with networking, I can never connect.

  Hello

  Please answer these questions so that we can better understand the issue.

  1. are you able to connect to the internet when the computer starts normally?

  2. is it a cable or a wireless connection?

  3. is there something specific that you are trying to do it in safe mode?

  Please try the troubleshooting on this article and check if it solves the problem.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know if it helps or if you need further assistance.

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Problems with InDesign in Dreamweaver - nothing goes with my code?

  I'm working on a site of DW and I'm having some trouble with the InDesign that I use. I am new to the program, so I'm still working my way, but I think it might be something with my code. Can you guys help out me?

  Background information:

  -The affected area is a three-column home page area.

  -I am trying to use the InDesign so that the webfonts pop up as text in all three columns.

  -The problem is that the webfonts are only applied to part of the text on one of the columns.

  -J' uses two InDesign on both sides of each column: a font for the title text and a font for the main text.

  - Index.html script code and was done with Dreamweaver CS6 on PC Windows 7

  Code:

  ...

  < div id = 'Preview' >

  < span style = "do-size: 32px;" do-family: MuseoSlab; ' > overview </span >

  < p > Roblox Networks Television Corporation, also known as networks of Roblox or RN, is owner and operator of properties television broadcasting to members of Roblox, an online game. Our properties include TV stations like the RN1, interactive properties such as rnone.tk and rnanytime.tk and studios and production such as rnUS facilities. < /p > < / span >

  < / div >

  < div id = "spectators" >

  < span style = "do-size: 32px;" do-family: MuseoSlab; "> </span > viewers

  < span style = "" do-family: MuseoSans; ">"

  < p > viewers can access properties of consumer to RN via the links below. < /p >

  Home page don't cases1 < p > < /p >

  < p > RN Anytime Homepage < /p >

  Ads from TV RN1 < p > < /p > < / span >

  < / div >

  < div id = "showchannelowners" >

  < span style = "do-size: 32px;" do-family: MuseoSlab; ' > for network owners and program </span >

  < span style = "" do-family: MuseoSans; ">"

  < p > program and network owners seek to disseminate with or become a partner of the television networks Roblox company can contact RN by these methods: < /p >

  < p > rnUS | E-mail | ROBLOX | < /p >

  < p > RNUK | E-mail | ROBLOX | < /p >

  </span >

  < / div >

  ...

  Sort can help guys?
  

  Update:

  Uploaded to a server to http://rntestsite.6te.net/ test and the problem seems to be fixed. Maybe that's just a problem with the program.

• Problem with links in Dreamweaver CS3 site root

  I have problems with the links from the root of the site when I'm working on my localhost with Dreamweaver CS3.
  
  I'm building a site with PHP, MySQL using the WAMP server. I have a page (www.site.com/index.php) I want to copy in the subdirectories (e.g. www.site.com/about/index.php) then I want to do the copy as painless as possible by using the links from the site root (e.g. /about/index.php). It works on the internet but NOT on localhost.
  
  Why is this? What can we do? Is there a fix if it is a bug? This seems like a simple thing, but it's such a problem.

  > Why is it?

  Because when your (local) server see is you run to the
  ROOT, he goes to ITS root, and rather than the Web site root (for example, htdocs or Inetpub).
  You can work around this by using virtual hosts (google it).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "KBwebpro" wrote in message
  News:fr6g48$GS4$1@forums. Macromedia.com...
  > I have a problem with links from the root of the site when I'm working on my
  > localhost with Dreamweaver CS3.
  >
  > I am building a site with PHP, MySQL by using the WAMP server. I have a page
  > (
  (> www.site.com/index.php) I want to copy in the subdirectories (for example
  (> www.site.com/about/index.php) if I want to make as painless print
  > as
  > possible using links from the site root (e.g. /about/index.php). He
  > works
  > on the internet but NOT on localhost.
  >
  > Why is it? What can we do? Is there a fix if it is a bug? This
  > seems
  > like a simple thing but it's such a problem.
  >