FTP with Dreamweaver CS 5.5 connection problems

Similar Questions

• Cannot use FTP with Dreamweaver

  Hi all
  
  I've got the Dreamweaver FTP connected to my site, but I'm having some trouble. I can download the pages of my host via the FTP of Dreamweaver, but I can't I download just get a timed message. I tried CuteFTP and I can upload and download without any problem at all. Is there a way I can configure the FTP of Dreamweaver to check if I have the etc good port open and someone had this problem? If so, what is wrong?
  
  Thanks a lot to all the

  If you go to site settings, and then click Advanced at the top then click Remote Info. Here, you should note the FTP information. Make sure that the box for passive FTP mode is enabled and you should be good to go.

• With device log Insight network connectivity problem

  We manage the virtual appliance 1.0 - beta and I noticed that the virtual appliance will fall the network periodically for a short period. I had constant pings, it will and it will just stop respond for anywhere from a few seconds to several minutes. You can also see in the capture where the data is missing in the user interface of screen attached. I know that we are not the problems with our ESXi hosts or dvSwitch because there are many other virtual machines running on the same host ESXi and same VLAN and they are not network connectivity problems. Does anyone else know this?

  Sounds like a network problem. Perhaps you have a dual IP / MAC address on the network? Do you perhaps have a routing problem on the network log Insight's sitting on that?

  Can you generate a bundle of support and download the instructions here: http://kb.vmware.com/kb/100852 (no need to SR just create a file called mvanbeck)

• Problems of FTP with Dreamweaver CC v 13.0

  Hello

  I had several problems with DW via ftp. I use DW as it was a Macromedia product and am familiar with the server settings. etc.

  The biggest problem comes from my using DW at work and also at home. Changes to the work, and then when you work at home I try to 'get' a particular folder so I have updated code, and DW fails as follows:

  web/staff/Pget_data.php - transfer

  /Web/staff/Pget_form.php - transfer

  /Web/staff/Pget_table.php - transfer

  /Web/staff/Pinsert_new_client.php - transfer

  /Web/staff/Pinsert_new_participant.php - transfer

  /Web/staff/pLogin.php - transfer

  /Web/staff/Oinsert_new_client.php - get successful operation

  /Web/staff/Ofreeassessment.php - error - year FTP error - could not get Ofreeassessment.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/Oget_data.php - error - year FTP error - could not get Oget_data.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/Plogout.php - transfer

  /Web/staff/pmember.php - transfer

  /Web/staff/Pnew_participant_info.php - transfer

  /Web/staff/Poutput_fns.php - transfer

  /Web/staff/Pregistration.php - transfer

  /Web/staff/Pshow_form.php - transfer

  /Web/staff/pStyle.CSS - transfer

  /Web/staff/Pupdate_participant_info.php - transfer

  /Web/staff/Ooutput_fns.php - error - year FTP error - could not get Ooutput_fns.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/Pfind_form.php - get successful operation

  /Web/staff/Oshow_form.php - error - year FTP error - could not get Oshow_form.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/Oupdate_client_info.php - error - year FTP error - could not get Oupdate_client_info.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/PPRupdate_participant_info.php - error - year FTP error - could not get PPRupdate_participant_info.php.   The network connection is not available. Please check and try again, action.

  /Web/staff/Pupdate_subset_participant_info.php - transfer

  /Web/staff/Puser_fns.php - transfer

  /Web/staff/PvalidateUser.php - transfer

  ... and so on

  These errors occur with computers Mac 10.7 and 10.8 that connect to different Internet service providers, and I work with the hosting company to see if there are questions, but earlier I made a change to a file and tried to download it.  DW has failed several times.

  I work with, say, entry.php, live on the site.  I want to rename my local file to entryR0 and save the file as, but does not have downloaded from the site, that at the local level, so I have to add a space or something so I can use Save, then perhaps that the file is downloaded.

  I passed, that works perfectly, but I don't want to stop my workflow to use for a single file.

  Any suggestions are welcome with gratitude!

  Thanks in advance.

  Hello

  Thanks for your help.  The server has just been migrated and file transfer issues no longer exist. I left the settings that 30 second timeout and pasv FTP option.  There is no problem now trying to 'get' a large file on the new server files.

  My ISP has been proactive in the migration of the server, and everything by not telling the old server was the problem, it would certainly seem the root cause.

  Kind regards

  sh_yhz1

• FTP with Dreamweaver CC connects not to the point Windows 8.1

  I just bought a new system and went to Windows 7 where everything worked very well, to 8.1 Windows. With the same settings, I can not connect via FTP to my server.

  I checked with the firewall and its not be blocked.

  Does anyone know why this would be?

  Thank you, turned out to be McAfee!

• A FTP with Dreamweaver CC transfer constantly hang up

  I'm a long time Dreamweaver user.  Try the evaluation version of DW cc.  I'm on an Imac, new installation of Yosemite - no previous version of DW on this machine.

  When you download the files to my remote server, if intermittently connects to the server.  Then, if not intermittently from connect-it downloads files - usually it says "file transfer" then stops and says ftp cannot be completed-check firewall.  I have all the firewall off.

  I enabled FTP options in the section more options of the server configuration tab.  I deleted the MacFileCache.dat file... I have re-set up my remote server a bunch of times... Still does not work.  I really don't see myself paying for this software if it does not work!

  I have no problem downloading files with TextWrangler, so I guess it's a matter of DW.  I spent at least 15 hours dealing with this issue - HELP!

  I have no problem with the FTP of DW, but some people have reported problems with some hosts.  Make sure that you send to the correct site root directory.  Passive FTP mode seems to work for me better.

  

  Nancy O.

• Laptop with Satellite U300-153 wireless connectivity problem

  I bought a laptop model Toshiba Satellite U300-153. I liked the laptop for its impressive looks and simplicity. But I am facing a problem with its WiFi connectivity. It shows * LIMIT CONNECTIVIY * and cannot browse the Internet. It shows the APIPA ip address.

  Help me solve this problem. Without WiFi, I can't imagine a laptop...

  Thanks in advance

  Tonon vanbrabant

  There are a few general options that must be verified.
  First check if your WLan driver can be updated.
  Second, you must Access the properties of the Protocol TCP/IP of WLan and must check if all options are set for the automatic.

  Last but not least all firewall settings should be checked also. Most incorrect security settings might prevent the internet connection.

• Network with HP Officejet 8500 A910A connectivity problem

  Network router: Linksys E4200

  Previously connected this printer on the network without any problems.

  Moved the printer to a new room and can connect is more.

  I am a professional computer experience and I'm stumped.

  I realize that closing the printer will probably caused a new IP address will be assigned by DHCP and we tried to work around that.

  Reset printer to factory default and reinstalled and reconnected to the network. Router can see the printer and now I have manually configured a static IP address for the printer. 192.168.1.101

  Router can ping the printer with no problems.

  None of my Windows 7 machines can ping the printer. I used the HP Support Assistant. You can find regularly but rarely the printer on the network. Even when it does not find the printer I still cannot ping it the same machine through the command line. I used printing HP and doctor Scan to check the network settings and I configured the static IP address on the printer to match the same subnet mask and gateway as found via the diagnostic tool. Still no dice.

  Puzzled and would like to know the pointers.

  Thanks in advance!

  Greg

  Correct me if I'm wrong, but Linksys DHCP IP 192.168.1.100 are thru.254 if I remember correctly.  You have a static IP address within the range the router DHCP.  You must configure the static IP address of 192.168.1.2 a.99.    Try using 192.168.1.10 as a static IP address.  Now go back and reinstall the drivers and full software.  Try now.

• DW FTP with SSL explicit

  I am trying to connect to the server of my client, but he told me that he thinks that Dreamweaver cannot connect with the security of the explicit SSL mode and that is why I get errors trying to connect. I don't know a lot about FTP and servers. I tried the SFTP, but it does not work. I searched this forum and cannot find a direct answer to the question: help for FTP of Dreamweaver made explicit the connection with SSL? If not, are there components Add on that will help or I have to go with some other FTP or Fetch? I'm on Mac OS X 10.5.5.
  
  Thank you
  
  Brian

  yevri wrote:
  > Draw?

  Actually reading more about explicit SSL from here:
  http://ftpguide.com/explicit.htm

  I don't think that my previous suggestion will help. It looks like
  Dreamweaver uses SFTP, SSH FTP based. You want FTPES, which
  Only other clients like FileZilla can use. I don't see in any case to
  CS3 FTPES, sorry.

  Dooza

  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Problems with FTP in Dreamweaver 4 connection

  I hope someone can help me with the following:
  
  Recently I can only connect to the host FTP in Dreamweaver once per day.
  
  I have two sites defined in my Dreamweaver 4 and before I was able to connect several times a day the two don't sites - no problem.
  But now he connects once and then what is trying to connect to the other set of site or maybe some time later on the first site again (where I connected on the same day already) I get the error message: "error FTP - connection to the host cannot be madet.
  Basically it now always only will link every day once.
  
  Anyone any idea what is the cause?
  
  Thanks a lot for your help.
  
  

  These issues are more often associated with your firewall. Please try
  Turn it off completely.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "NicknamecomputerABC" wrote in message
  News:g5f3d6$4P1$1@forums. Macromedia.com...
  > I use Windows XP.
  >
  > Use passive FTP mode (it is checked, when connecting works)
  > but also tried unchecking it, still the same error message.
  >
  > Yes, contacted my host.
  > Actually just changed hosts and the previous one, where the same problem
  > started earlier, has not helped, said something like, this is the
  > 'CAP in Dreamweaver' - although this makes no sense, I
  > think,.
  > as it was working before long?
  > Also contacted my new host, a little more willing to help, had me check
  > many things (also ongoing enforcement 'command' to see if I connect to them)
  > server and I did.
  >
  > Use an AVM FritzBox (but also used this one when everything worked without)
  (> problems), there also now active FTP IE to port 21.
  >
  > What I find strange is that it connects, but not more than once
  > a
  > day longer.
  > so the parameters must be right.
  >
  > I use AVG antivirus, but also tried not to use, or do not use
  > their
  > shield (firewall) but still the same.
  >
  > I also tested a third-party client FTP (FileZilla) but I'm
  > get
  > the following message appears:
  > Status: connection established, waiting for welcome message...
  > Error: could not connect to the server
  >
  > So could not even connect with FileZilla once.
  >
  > Not sure where I can see the FTP log window? (Or is it the message above
  > of FileZilla?
  >
  >
  > Thanks for your help.
  >
  >

• Connection with Dreamweaver 2014 SFTP problem

  I have a very weird SFTP connection problem with Dreamweaver CC (2014). I'm on a Mac 10.9.4 and have no problem connecting to my server via SFTP with Dreamweaver CS 6. However, using the same exact settings on CC (2014), I get the following error: "an FTP error occurred - cannot connect to the host." Your login or password is incorrect. Please check your login information.

  I'm really at a loss here. Connection from the command line works without problem.

  Any thoughts?

  Thanks for your help. I was able to understand. I have several authentication schemes enabled on my server (password, two private key factors). For some reason password authentication does not work with Dreamweaver CC (2014), but using the auth key private with password did the trick.

  Thanks for your help!

• FTP from Dreamweaver Adobe connection does not work with the German "Umlaut" as "o" in the severadress

  Hello

  Today, I tried to establish an FTP connection to the serveradress "ftp.mobelverwandlung.com", but I get the error message that the program could not connect to host. Dreamweaver works perfectly with the other serveradresses and I managed to connect to "ftp.mobelverwandlung.com" with other programs, I think the problem is the German 'Umlaut' 'o'. Anyone who recognized the same problem, and does anyone know a solution?

  Thank you very much for your help

  Gruss Dich Maximilian,

  ICH hab ' evil bei meinem provider nachgesehen. Ublicherweise muss man sleeps die ursprungliche für die Zeit Vergleichen und eine neue vereinbaren minutes field. However show sie sich kulant EIB so kurzen "Laufzeiten" von ein paar Stunden wie bei dir. Versuche den Support Deines Providers by Telefon zu Berge.

  MfG

  Hans-Günter

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• I have all of a sudden my site with Dreamweaver FTP download problems?

  I use CS6 for a couple of years and all of a sudden, I have a problem downloading from my site using FTP of Dreamweaver?

  Maybe your host did something on the side of the remote server.  Have you contacted them?

  You have enough space available server?

  You can download files with FTP 3rd party like Filezillaclient?

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian