full backup on a network drive

Similar Questions

• I want to use a flash drive for backup, BUT I want a full backup of the entire drive.

  I had once an external drive for backup.  It was supposed to be a backup that would replace everything and put it back where it was.  I cheated because when I got to use it I found that it would reinstall was certain documents and photos.  None of my downloads and all the update programs has been lost. I wanted a mirror image!

  Now, I think a full image on a flash drive would be the way to go, but I don't know what software to use.

  I need help from someone who has this software and a USB flash drive.  Thank you

  Hello

  1/10 1.5 TB = 150 GB - buy a 150 GB flash drive (if you could find it on the market today) could cost you an arm and a leg. Buy a 1 to external portable HARD drive can cost you a little more $ 100.

  I hope this helps.

• Vista Home Premium cannot perform backup on the network drive

  Fairly well described in the title... asks for a password. no password required on each pc. Seems to be a known problem based on the messages I've seen. Is there a fix. ???

  Unstable1

  Thanks for posting on this Forum.

  What applications do you use to make your backup?  You use the Configuration and status of the backup program that comes with Windows Vista or the backup center and restoration?

  Is it a home network?  If so, all computers have the same name of "workgroup"?  As you may know, the same name of user and password must be on all systems that are part of a working group.  You are able to "navigate" to this network drive?

  If the network drive (part) belongs to a Windows domain, make sure that you have the appropriate rights to write to this drive (Share) network. Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup on a network drive with Ultimate

  I recently installed a NAS drive in my home network and I want to keep my backups here.
  I used to date the backup/restore utility of Vista Ultimate with a USB HDD, however, it seems that this utility can store on a local disk.
  Is it possible (and if so, how) to backup on a storage area network with this build-in tool - that has worked well for me so far?

  Thanks for your replies.

  No, although it seems logical that you can do, your "PC Backup" does not save to a network drive, since you are going from a boot CD.

  If you choose not to make a "Backup Files", you should see Net readers. Is - that answeer your question? Mark L. Ferguson MS - MVP

• BMR in WINRE will not restore the backup to the network drive.

  We are currently in the testing phase of DPM 2007 deployment for Windows Server 2008 backup.

  DPM backup on Windows Storage Server 2008 correctly on the network attached to the DPM server drive.

  The Windows Storage Server 2008 I shot the current hard drive that was working properly (500GB) the computer and replaced by a 1 to.

  I started the machine with WSS2008 drive, in the CMD prompt, I enter the following command:

  1) x:\ > start /w wpeinit
  2) x:\ > wbadmin get versions - backuptarget: \\SANDSHREW\serverbackup$
  3) x:\ > wbadmin start sysrecovery-version:11/03/2012-18:04 - backuptarget: \\SANDSHREW\ServerBackup$ - recreatedisks

  I should mention that when I run 2 and 3 he asks me the login for the server sandshrew.

  The error I get on 3 is:

  The Meadow (System ASR) recovery automated system restore operation failed.
  The parameter is incorrect.

  I played with this for days now, any help would be greatly appreciated :)

  Thanks a bunch,

  Geoff

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows IT Pro Forum 2008:

  http://social.technet.Microsoft.com/forums/en/windowsserver2008r2general/threads

  Kind regards.

• OK made a full backup, replace the hard drive and have a recovery disk

  Once my system is recovered on family Vista premium how to restore all my files from my backup disks so that things work same as before? I know that I should reload programs that are not on the recovery.

  TIA

  Hello

  You did not a full PC with Vista Home Premium backup software Vista, since they only allow backup of files.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  http://www.Vistax64.com/tutorials/100253-restore-backup-files.html

  See you soon.

• Vista Ultimate full Backup Restore from Ext Drive to new HD?

  My hard drive is a failure.  I have a Vista Ultim. A disk backup hard Ext., what is the

  process to do a restore is complete on the new HD?  I can't seem to find the answer, the

  I am 77 may have something to do with it.  Thanks in advance

  Hello

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Cannot perform a full backup of my drive hard using a 16 GB Flash drive

  Original title: backup

  I am trying to perform a full backup of my hard drive using a 16 GB Flash disk. Windows does not allow me to do so; or he will put in the form of USB key when prompted to do so.  Help me Mr Wizard.

  Hello
   
  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista
  2. do you use the Windows backup feature to backup?
  3. What is the size of the data you want to save on the Flash drive?
  4. what happens when you perform the backup? You get an error as well?
   
  If you use Windows 7, check out these links.
   
  See: how much space storage do I need back up files?
  http://Windows.Microsoft.com/en-NZ/Windows7/back-up-and-restore-frequently-asked-questions
   
  See also:
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
  Hope the information is useful.
   

• We get an error "insufficient memory", then the attempt to backup to network drive

  * Original title: Win7 backup and restore memory leak crashes while the backup on the network drive

  I've been back two computers on a netwrk player for almost a year using Win7 backup and restore

  A few months ago a computer started to lock up. This only happens during a backup.

  I deleted all the backups and tried again and found the same problem. The RAM continues to go upward in the 90% until the computer crashes and sends a low-memory error message.

  I have a disc of 2 TB network hard. 700 GB free.

  My backups are image system of 250 GB and 150 GB user folder. Whenever I try to backup of that memory increases just until it runs out.

  Is this related to a recent update from Windows 7?

  Help, please. I'm 3 months without a backup on this computer.

  FIXED MEMORY LEAK!

  After weeks of surveillance of the display of memory resources and looking for other forums I found the culprit.

  McAfee AnitVirus software Once I uninstalled the program, everything worked. The computer works much faster, SVCHOST.exe, explorer.exe, sidebar etc use much much less memory.

  Of course, this software has a problem with the copy of the files on a disk network hard. I couldn't copy 50Gbyte overall to the network but now Win7 back/restore drive, does this very easiliy and timely backup of my files users 50Gbyte more image system 256GByte with ease and allow the use of RAM. Use of RAM total now stands at 40% throughout the process.

  This also explains why my other computers never had a problem because they'll TrendMicro. I have a license for 2 packs of McAfee, but was always suspicious with each other due to problems of continuous with the help of McAfee over the years. This last problem led me to the conclusion not to use.

• Windows XP Pro - Restore backup full to the new hard drive Questions

  My HD player (only four years, ARGH) for my Dell Dimension 4700 threw the sector of disk errors in Event Viewer.  I tried disc analysis to fix and it did not help.  I did a full backup, including the State information system on an external hard drive using backup utility Windows XP Pro.  I don't have an emergency boot disk, just the XP PRO installation disc.

  I have the new drive (Sata 320 GB rather than Sata 80 GB) installed and loaded with Windows XP again.  I am able to connect and fix the external hard drive and want to restore my old information.

  I think that I should restore the backup file using Windows XP with security, junction points, and above all, preserve the mount points for the reader verify that Yes.

  It is the appropriate procedure to restore a full backup to a hard drive nine?

  Restoration of the old registry to the backup will damage the install drive?

  Thank you

  RCH2330

  
  

• Move catalog to network drive.

  I need some good advice for a catalog of 13 k + photos I am trying to clean up. I use Elements 7, I bought 11 elements and plans to install soon. Part of my photos are physically located on my hard drive, and are on a network mapped as J: drive.  Elements are found these pictures j: but I don't think that the catalog of items is aware that J: is a removable network drive. It seems to them everytime I open elements, making the program very slow to start. Should I use the "passage to a removable drive" to move these photos? How the elements will handle these pictures were sent to a removable drive? I will be always able to view thumbnails of photos and search through my tags for them? If I copy my photos to a new disk, but still call this drive J: elements will be able to find them? And finally, if I perform this task 'move to removable disk', do I do now with Elements 7 or 11 elements first day? Help, please. Joanne

  Anne of Valkyrie says:

  Part of my photos are physically located on my hard drive, and are on a network mapped as J: drive.  Elements are found these pictures j: but I don't think that the catalog of items is aware that J: is a removable network drive. It seems to them everytime I open elements, making the program very slow to start.  Joanne

  If the Organizer is slow to start and seems to be looking, you need to check two things:

  -that you do not have to pay for the service "watched folders" to look at the network drive (file / looked at the menu of folders)

  -in preferences, files, you don't have checked search automatic and reconnection.

  If you can access your files on the network from the Organizer drive and see the thumbnails, no need to worry. You can move the files to your internal drive to and from the network, one by the file / move the menu or by dragging and dropping files in the folder. The organizer should not consider the network drive differently from an external USB drive: If such a unit is not physically connected, you will get "missing files". Displays only the thumbnails that are stored in the catalog. It is different from files on a CD/DVD: when they are not connected, you will get a warning of offline support.

  Only the catalog itself (the database) can be stored on a drive network; However, it can be stored on a USB external drive.

  If you want to upgrade to PSE11, be sure to perform a full backup to a second drive external (these USB keys are affordable today). Note that since this backup, you can restore the files not only on their location of origin, but also in a custom location, for example in the internal computer drive (even if the original files are scattered on several internal or external drives).

  If you install PSE11 on your current computer, you should be prompted to convert the existing catalogs to the new format of PSE11 without having all the files or folders to move or copy. This conversion does not change your current PSE7 catalog, which still works as before.

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TM backup using network drive

  Hello

  I was wondering if there is a way to use my Time Machine backup network drive?

  Well Yes. There are.

• Automatic backup bookmarks to the Documents folder for this file history Windows stores up to my network drive

  Historical files Windows backup certain folders (Documents, music, photos, videos and office) on a network drive. How can I get Firefox to automatically save Favorites, for example when I leave FF, in one of these folders, for example "Documents"? While it is automatically saved in a place where the drive of my PC crashes.

  I spent some time googling this simple question and got many confused results and nothing to do with!

  Sorry, a feature like that is not available in Firefox, runs to move your entire profile folder.

  But this Pike Bookmark Backup extension is able to do this.

• Can't deleted iPhoto Library the network drive backup

  I made a backup of my library iPhoto on a network drive. Since then, I realized Time Machine made a better job of backing up my iPhoto library. So I planned to remove the library for free space.

  When I try, I get this message:

  "The operation cannot be performed because you have not granted access to some of the elements."

  If I can spend in the library and digging around, I find there are hundreds, maybe thousands of articles where I don't have permission. Y at - it a way to replace that can simply remove the library?

  Which does not imply iPhoto somehow - maybe you can get help from the forum for your operating system, but most likely, you need support from the supplier of the network drive - this is the question is

  I would ask that your post moved to the captain El forum and see if some one can help

  LN