Full encryption of the disk for Vista software

Similar Questions

• Full encryption of the disk or partition virtual machine system

  Hello

  Please tell me.

  Full encryption of the disk or partition system on the virtual machine tools are supported? If I encrypt on the guest operating system, OS can start and run without ERROR?

  As a test, I tried with TrueCrypt full disk encryption, which is a free tool, and the virtual machine seems to operate normally...

  Thank you.

  Hello

  Dito on this point.

  I have a few windows with compression and encryption active hosts. No problems.

  http://blog.laspina.ca/

• Full encryption of the disk, hard disk password?

  Hey,.

  I just got my T530 (2359CTO) and need to encrypt the hard drive. When I bought it, I opted (among other reasons) for Windows 8 Professional because it comes with BitLocker. I then discovered that some ThinkPads have hard disks that support hardware encryption (FDE).

  I tried to figure out if the mine has this feature, but had no luck. The BIOS gives me the option to set a password for hard drive, but I'm not positive that it crypt actually the hard drive with this setting. Could someone shed some light on

  (a) how to determine if my hard drive takes in charge the hardware encryption

  (b) how to activate

  Thank you!

  disk password is not related to the disc encryption. Your computer has been configured to order. If you purchased the Lenovo machine, unless you specify FDE, you haven't

• where can I buy a boot disk for vista 64 ultimate

  Windows had installed an automatic update disabled my norton 360 and advocate changing the load settings for my Windows Administrator profile cuasing to run a profile of temporary market and I run the system restore, tried to pull the files from the profile administraor to a new user profile, that I put up as an administrator and im still could not get the ducuments the main profile im unable to connect.  Microsoft offers no recovery disc for vista 64 ultimate and advised me to purchase the full retail version to reload Vista, which is ludacris. I have windows 7 and 8 on other machines, but I'm not able to create a drive recovery vista ultimate 64 and ive lost my original CD copy that I have buaght years.  all they're going to do for me is to try to convince me to pay for their customer support which I didn't need. I need a startup disk for vista 64 ultimate

  Thank you

  Hello

  What to do when a Temp profile is loaded;

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  See you soon.

• All build-in tools to verify the health of the disk for XP?

  Anyone have any suggestions on any build-in tools to verify the health of the disk for XP?

  Thanks in advance for your suggestions

  http://www.labnol.org/software/test-hard-drive-for-problems/17430/

  Try this Web site. :)

• How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  * original title - full hard drive. *

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  Download and run JDiskReport.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a larger hard drive.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files to delete or uninstall applications.

• Have the disk for the Acrobat Pro disc. Installed, but only the trial opens

  Have the disk for the Acrobat Pro disc. Installed, but only the trial opens

  Hi clanhansen,

  Please enter the serial number purchased in the trial version to activate the software.

  To find the serial number, please visit: http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  Kind regards

  Rave

• Lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead?

  I lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead? It is a mac.

  Thanks for any help or ideas.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_corporate_graphics_art_p...

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• legality of the use of vista software to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  Hey rjmhhar

  If you use a license of operating system vista as part of an upgrade, it is related to the new upgrade license

  You can use it NOT then install vista on another computer when it is used in the installation as part of this upgrade

  Walter, the time zone traveller

• Recovery software data and the partition for Vista?

  I have a HP desktop computer that started having problems starting. Startup Repair couldn't fix, but showed "no OS installed. I guess it's a corrupted MBR/MBT problem.

  In any case, I made the fatal mistake assuming that Vista has the same functionality of XP restore/recovery and would simply repair the file system not complete format/reinstall. Within two seconds, I realized that it was reformatting the drive and disconnected from the computer (because you can't give up a recovery).

  Now, of course, the player starts not at all and displays "No MBR".  I removed the disk and put it in an external USB box to see the content. It only shows a new Windows and a few other folders with one or two files system in them.

  Anyway, I know that all the old data has been not overwritten in 2 seconds, if it is still there. Not to mention, HP no longer ships of installation disks of Windows and preload in place of the images in a separate partition. I need to recover this option to re - install Vista, in the worst case scenario.

  So, I need/file recovery at least get software partition all my data. There are a hundred apps out there, and it is difficult to tell which are the best (they are quite expensive). I can't find any reputable sites that do an actual test on the Soft full - for example, C/Net only tests the features of the limited demo version.

  At the very least, I would like to recover my lost data on an external drive, then recover if possible, the installation of Vista partition and do a clean install on the disk.

  Are there apps free open source reliable and easy to use? So far, I am considering

  EASEUS Data Recovery Wizard Smart Partition Recovery

  Try this info below.

  You may need to contact the data recovery for it experts.

  Be warned: they are very $$$.

  Data recovery:

  Use Knoppix Live CD to try to recover your data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Disks in the system for Vista

  I bought a desktop PC with Windows Vista Home Premium 64-bit and later updated my OS by buying a Windows 7 Home Premium upgrade CD soon after. A few months ago I started noticing my HDD is running out so I bought a new hard drive and installed my Windows 7 CD on that one. Given that it was only an upgrade CD, after about a month my BONES began to give me questions by telling me my Windows copy was not authentic. I realized it was because I installed upgrading Windows 7 on a new hard drive. I never received a Vista recovery CD with my purchase of the computer and I don't know what to do.  I have the product key of Windows Vista Edition Home Premium on a sticker on my computer.

  Is it possible to get a download of system disk?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Trying to create the recovery for Vista, error message disk on scriptlibrary.dat

  try to create a recovery disc for vista, cannot that a window pops up with the following.

  ScriptLibrary.dat

  cannot be varified for digital certificates, automation server can't create object

  Help, please

  Hi Michael,

  You're talking about recovery disk from the manufacturer created from the computer recovery partitiion or are you talking about a generic recovery for repairs disk (making it impossible to reinstall the operating system)?

  If the recovery disk from the manufacturer, please contact technical support from the manufacturer for assistance that the process of creating a disk of the partition recovery is their process and not Microsoft and varies by manufacturer and sometimes even my computer within this manufacturer model.  We do not know how to deal with each type or how to handle a problem such as you experience with this process - even if we knew that the manufacturer make and model specific to computer which you did not (but with which we might be able to provide specific links to the manufacturer).

  If you mean a recovery for the repair disk, then try using the following to do an and see if it works any better than any method that you use: http://www.vistax64.com/tutorials/141820-create-recovery-disc.html.

  I hope this helps.

  Good luck!