Display in FF8.0 problems

Similar Questions

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Satellite Pro M10: Display of the strange problem

  I have a M10 Pro of the Satellite with 14 inch display is 6 weeks out of warranty.

  The other day, I got cold room and the display went funny - odd pixels, green and black with small points which then becomes more clear screen so that the entire screen is a mixture of points fluorescent which becomes white and then things come back.

  Then, the cycle repeats itself after a few seconds.

  I perform a restart and everything's going well for a while, and then it restarts. I move the laptop in a cold room and it's ok again. I can't understand that the issue occurs on Windows XP and SUSE 9.0 (although it just hangs). I have run SpyBot, have the latest virus checkers, the update of Windows (SP2) and NVidia drivers.

  Any ideas?

  Seemed to have solved the problem by dismantling the machine, could not do not get all the way and completely remove the top from the bottom as there seems to be a hidden screw. Everything is fine now, could have been the fact that some of the screws were loose.

  Also had a full SpyBot and Virus Check.

  I also had to re - save under a different name, since it is "Specific country" even if I thought that I had, I now have three profiles - two I created recently, and one I could not remember the username for, would be really better if password request tells you the user name to an e-mail address it is registered. It's really hard to keep track of them so I have a lot of connections as a computer scientist. Really really annoying and stupid system.

• Tecra M3 dark display, checked the usual problems

  Hello

  My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  If haven't tried a new cable from the screen, no difference and a new inverter, also no difference.

  Sometimes if I switch between views (Fn + F5) I can get the display works fine, but as soon as the screen is turned off for some reason it won't once again.

  I also re-greased the heatsink on the NVidia chip.

  And I checked the backlight by plugging a converter working on another laptop.

  I have a M1 and there is a relay type sound when something has changed on the screen, I can't remember if the M3 never makes a similar sound, even if I used it for about 5 years.

  I also saw that he suggested that he might think that the cover is closed, I don't know how the M3 detects that the lid is closed.

  Any suggestion or help would be welcome.

  > My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  This means that the graphics card chip was Ok, which means that it could be a display problem
  I doubt that it ups s related question. If FL inverter would be defective, then you'd see everything on the screen, but everything would be visible behind a thick fog.

  Of course, it s that my personal opinion and nobody would be able to tell what dysfunction part without running any hardware, test procedures
  Then maybe you should ask a support technician

• Display in 3D games problems

  Satellite 5105-s701 (GeForce4 440 Go)
  Windows xp pro

  When I play 3D - like CS, Call of Duty and Star Wars KOTOR games a lot of green dots appear in the areas that are supposed to be dark. Sometimes, there are no problems, and sometimes the Green errors are everywhere.

  I tried to change the display driver and I have also reinstalled the system (from recovery cd) and nothing did - I guess it's a hardware problem.

  Can someone tell me what the problem is and if I can fix it?

  Hello

  You can try to put it up using Toshiba Power Saver. Somewhere in full power properties must be option called cooling method. Use Maximum performance.

• Satellite A105-4094 display - only half screen problem

  So my screen is showing half, it is a compressed version of the full screen.
  The right of the screen is turned on, but all black and just after the point halfway on the left side is a bunch of image then a strip of black before you see the compressed image.

  The output works very well for an external. I know that this is not the video card. I reinstalled the Bios updated, and I tried to use powerstrip.
  I'm sure it's a software problem as in system devices that my screen appears as flat digital display with a maximum of 1024 x 768 resolution, but the native is 1200 x 800 and it used to describe something else as internal computer monitor toshiba laptop.

  No driver hasn't solved the problem and I can't find a similar problem anywhere!
  Anyone has any ideas of what this could be?

  He used to do this and a restart would fix it sometimes, but now it's just stuck like that.
  If you need photos, I take screen shots later, but I have no available right now...

  You have an Intel graphics card?

  If so, go to the control panel and access the Intel Graphics Manager.

  Here you have to select the display settings and try to put it in full screen (without borders)

  If the problem is related to the software then this accelerated procedure should help you.

  But the problem could be related to a hardware problem too

  In this case he needed a help of ASP.

  Good bye

• Satellite Pro P100 - multiple display after Exchange screen problem

  My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

  OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

  At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

  At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

  The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

  Under the display properties > settings the display shows:
  1. (multiple screens) on NVIDIA GeForce Go 7900 GS
  2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

  I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

  I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

  Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

  My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

  Help, please!

  Thank you
  Ghjghj

  It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
  OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

  I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
  The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

  Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

  Good luck!

• W540 - brightness of the display and audio output problems

  Hi all

  I've got 2 separate but really annoying problems with my W540 20BH:

  -display brightness keys does not:

  upon awakening from Hibernation, sometimer (really, randomly!) mode the brightness screen (Fn + F5/F6) keys do not work... If the brightness of the screen is stuck on max, min, or an intermediate level...

  Any who experience this problem? How to solve it? Is there a way to stop and restart the process that controls the Fn keys?

  -audio channel switch gets stuck

  A normal behavior of the audio configuration is:

  (1) the disabled speaker, microphone disabled volume

  (2) when you plug a headphone 4 pin, the headphone volume is running, microphone of the headset is turned on; the speaker volume is always turns off.

  (3) when you unplug the headphones, the volume of the speakers is always 0

  After each start up, the audio channel is 0, but don't commute between the helmet when it is plugged!

  I have to open the Control Panel, properties of realtek. With this window, disconnect and reconnect the headset. Now the volume has its normal behavior.

  Anyone experience this? You have a reversal or a better way to configure the audio channels and events, which is able to bypass the realtek Manager?

  Thanks in advance to everyone!

  
  

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• Display in Windows XP problems

  Original title: display windows win XP drivers

  have windows xp installed and have display problems

  Hello

  -Do you get any error messages?
  -What exactly is the problem with your screen?
  Suggestions for a question on the help forums

  You can follow the steps described in this article and check if this helps solve your problem.

  Resources for troubleshooting problems in Windows XP

• Display in Windows Mail problem

  Original title: Outlook.com

  Title changed to "Display in WLM problem."

  Although he can be independent, when I logged on this AM, I had IE 9 privacy statement. When I open Windows Mail, lack of it for the first time ever was, on the far left of the screen, the designations for what I watch one, that is, "Inbox", "writes," "Sent", etc. I have them want to come back and can not find directions to do so. I'm not sure that this question does not belong to Outlook.com, which I was surprised to see it as a category instead of Windows Mail. Outlook.com, I copied the following: "you can connect Windows Mail for Windows Vista to your e-mail account using POP3 or IMAP4 connectivity. I have POP3. Anyone know what's happened and how do I get my list of categories of messages to display on my screen again? Thank you.

  Kay,

  iFiredog is correct. I don't have Windows Live Mail. I have 'Windows Mail'. This is the Version 6.0.6000.16386 (vista_rtm.061101 - 2205). I can't find the tool captures to take a screenshot. While I was looking for it, I came across an icon at the far right of them above my Windows Mail. It is a rectangle (or square?) anything other than straight lines, showing one after the other on the icon. I clicked it. Bingo-test - files in my Windows Mail reappeared on the left side of my Panel. So, the problem seems to be resolved, unless when I go back to Windows Mail, list of folders is part once again! I have no idea how I lost it.  As to move my viewing of Windows Mail to the right with the arrow (on each side of the screen), I had tried more than once. The arrow on the left side of my screen was not working. He has nothing. The arrow on the right side did expand the display area to include plenty of empty space, that I have on the right. However, I leave here! Thank you for your help, even if she didn't direct me to a solution, because I fell on my own.  Libbiss

• HP laptop G60 - display screen (photos attached) problem

  Someone has encountered a problem of screen like those shown below. I've updated display drivers and monitor, but the problem persists. Appreciate help with this.

  Best,

  DR

  

  It means then you need to replace your laptop display board and everything will be okay again.

• Display of latitude D620 problems

  I love my old machine. Keyboard and screen perfect for me.

  But the LCD screen does not show anything. An external display shows nothing either.

  Diagnostic mode does not show anything on the LCD screen. On the external display, it shows bands of color and then very strange looking for confusing things that means nothing to me.

  Yes, I test the RAM on another machine and it's fine.

  Pointers to what could be the problem? I'm pretty happy with the replacement of components.

  This is probably a bad video chip - common if the system has a chip from nVidia.  The motherboard must be replaced.

  If you are planning keep the system including a while, consider replacing the motherboard with an Intel video credit - you will need a new heat sink (one of the nVidia GPU does not have the Intel motherboard and vice versa).

• Computer display of Windows 7 problem

  My laptop (Dell Studio XPS 435MT) screen (Dell SP2309W) poster of the grey spots or gray/pink bars horizontal.  My video card is AMD Radeon HD 4850, v.8.631, A0Q.  Restart or reinstall the driver (v.850.0.0) does not solve the problem.  Sometimes I get "display driver has stopped to... and has recovered", but the problem persists.  Through the procedure of diagnostic complete (F12 and then restart) solves the problem, but the difficulty is short-lived, lasting a few hours.  Even if I don't use the computer, the display problem reappears.  Y at - it a fix for this problem?

  Hello

  If making sure you have the latest graphics drivers installed does not solve the problem, the next step is to replace the graphics/video card.

  You got your drivers from here?

  http://www.Dell.com/support/home/us/en/04/product-support/product/Studio-XPS-435/drivers

  As it is a desktop, either Exchange your graphics card with a good.

  Or, if graphics card built-in, you will need to install a graphics card in a slot of the motherboard to see if this solves the problem.

  See you soon.

• Display in Windows 8 problem

  Hello.

  I have a laptop Lenovo (Y510) recently and installed windows 8 pro on it. I have a problem in the display in most programs. Ribbon of Microsoft Office programs icons are large and are not transparent. In the lower part of some orders of Abaqus windows are off-screen (they exist, such as the buttons OK and cancel, but they cannot be seen on the screen) and Ribbon icons are larger than usual (I have another laptop with windows 7 and can see this ions correctly here). I spent the last few days looking to solve this problem, but it has still not resolved. The recommended resolution is 1366 x 768 and the laptop screen is HD.

  Please help me. It's a big problem.

  You can adjust the size of the elements on the screen by this method:

  (1) right click on the desktop, choose the resolution of the screen.

  2) click on "make text and other elements more or less."

  (3) choose your new size

  (4) restart the computer