Full screen slideshow - access to the target in mouseover thumbnails

Similar Questions

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• View full-screen media back to the small window after 20-30 minutes of play. WMP - 11, Classic, VLC, all media players.

  Did you recently clean reinstall of the operating system, no malware present, all drivers up to date, no media questions before you reinstall, now, when playing video files in any format, on any media player, full-screen doesn't "stick", but she climbs to view more small window for no apparent reason.  I tried to temporarily turn off anything that might interfere: malware apps, anti-virus, auto updaters, etc., even all the processes which seemed sure to stop temporarily, but after about 20 to 30 minutes to play any video format (mpeg4, avi, DVD disc, etc., full screen will jump to the small window for no apparent reason. When the problem persisted I even downloaded fresh copies of WMP 11, WMP Classic and VLC, but no joy, screen size change continues to happen with all the players, all types of video files. I'm out of ideas. What could possibly be the cause?

  [XP Home Edition, Service Pack 3, Intel 2.5 gHz, 1 GB Ram, 80 Gb HDD, SiS 661FX/GX Mirage Graphics... Yes, old, I know, but it worked well for me so far.]

  Thank you for your response. I tried your suggestions but they do not solve the problem.  You did, however, lead me to looking at my system settings instead of the settings for the media players - behavior was going on with WMP 11, Media Player Classic and VLC.  I found that, I hope, will prove to be the solution: in Device Manager > Sound, video & Game Controllers > media Remotes > properties I found my video controller (mciavi32.dll) opened its properties > settings > watch the video of 'window' or 'full screen '.  I selected "full screen" and for extra measure of value WMP 11 always open it in full screen. I have not done a test yet further with these three players, but I hope that these parameters will cure the problem. Oh yes, I went to SiS, I already had the latest display driver, but I have downloaded/installed a new copy anyway, just to be certain that my old one was not corrupted in a non-obvious way.

  Again, thank you for your help.

• All of a sudden my pictures folders are now all show in Windows Media Player and I can't open each photo in full screen, but only in the video display mode.

  All of a sudden my pictures folders are now all show in Windows Media Player and I can't open each photo in full screen, but only in the video display mode.   When I go to my pictures and choose view as thumbnails, that's fine, but when I click on the individual photo, it shows on the screen no video not in mode full screen and I can't move the photo to the photo without closing the video screen.  How can I get my pictures on Windows Media Player?

  This problem has now been resolved.  I went in my computer > tools > Folder Options > file Type, select the type of file and clicked on advanced then > change and changed back to Windows Picture and Fax Viewer in Windows Media Player.  I had the idea of a response posted on this forum about a different issue, but who pointed me in the right direction.

• Bring item full screen after use of the 3D camera and changing point position/orientation

  Hello.  I am a new user of After Effects.

  After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

  is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

  as if you do not apply 3D or or changes of position?

  Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

  so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

  which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

  Thanks in advance for any direction.

  Hey brvid

  The easiest way is to:

  -Start with your image full screen

  -Click on the box for this layer 3D

  -Add a camera (which uses the current view for its zoom/position)

  -Add a null value, click on the 3D box so that the null value

  -parent the camera as NULL. That the null value has the same ISP values as image

  Now, you can duplicate this image and place around the scene in any position and rotation.

  - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

  Hope this helps,

  Steve

• Two s flv on the swf page, button full screen on every fact the same full-screen go video

  OK, so I use CS3 to try to put two videos on the same page of .swf .flv, BUT only go full screen any button of the video for skin to go full screen I press, and all the rest of the buttons on the skin works for the appropriate video. I remember in Actionscript 2.0, in component for video settings, you can change the name of the field in the schema to play multiple videos in a .swf file, wondering if AS3 had a similar setting to the full screen.

  You are welcome.

  p.s. Please mark this thread as answered, if you can.

• Full screen video mode, preserving the size of objects

  Hello
  
  My task is to show a video player using the full screen. I have no problem doing that, but I need to perform in such a way that only video scales to full screen while other objects (the player controls) remain unadjusted. If I just go full screen - mode everything onstage is furred naturally.
  
  Playing with the functions of full screen I could come up with the only solution that is to calculate a scale factor (based on, say, stage.width and stageWidth) and adjust the dimensions of the player controls and position accordingly.
  
  Is the best way to preserve the sizes of objects or there is a better technique?
  
  I was hoping that each display object has it's own scene and I could show only video fullscreen by doing something like:
  
  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;
  
  but he's still developing all objects.
  
  Thanks much for sharing you experience (or sources).

  Hello

  I must apologize for my stupidity in the post in 2008-06-19 12:08:40 (as well as other incidents of my brain dysfunction). I made statements that are not true. For example, I said: "their assumption was that video is the King, and by default to go fullscreen is to resize the video only." It's BS. They don't make this assumption and, in fact, programmers have complete control over the display.

  kglad, you inspired me to look deeper into the hardware acceleration and now I understand better things (or so I hope).

  I do deviate acceleration hardware and all resizing occurs by program.

  My understanding is that when using the Rectangle across the video - he dimensionnera everything that is within the limits of the rectangle. I couldn't find a way to scale just a video using the rectangle. I was hoping that working a line as follows:

  _video.stage.fullScreenSourceRect = screenRectangle;
  _video.stage.displayState = StageDisplayState.FULL_SCREEN;

  He did but in the same way that (note there no _video in scope)

  stage.fullScreenSourceRect = screenRectangle;
  stage.displayState = StageDisplayState.FULL_SCREEN; -which means that everything is scaled up.

  I don't think I fully understand the concept of stage again because in my mind that each object display had it's own step and this step translates the scene of a higher display object (parent). Actually, when I speak of stage - it takes the reference to the highest stage.

  kglad, if you find the time to clarify this point - it would be a huge contribution to humanity :-)

  Back to the description of how I coded full screen WITHOUT using hardware acceleration (in case someone still hope my intellect :-):)

  Step 1. A mechanism that responds to the wish of the user to see the screen full of thing.

  It could be a button with a listener added. The listener will change stage.displayState

  Step 2. Create a mechanism which reacts to changes in displayState.

  a. get System.Capabilities.screenResolutionX and screenResolutionY - these two parameters will tell you how wide and high video possible.

  b. calculate desired video dimensions based on the height and width of resolution and video metadata. This means that one of the ratios will give you scale factor. For example:

  var scaleFactor:Number = Capabilities.screenResolutionY/metaData.info.height will define how it increased (by definition _video.scaleY and scaleX = scaleFactor) using this scale factor newly calculated (assuming you want all the video screen filling).

  c. balance video. Center it if you wish.

  d. hide the objects you want to be shown in the view full screen

  e. visible positions of objects in a desired way. For example, move the player to the bottom of the screen controls calculate x and y, once again, by using parameters screenResolution.

  When the user leaves the mode full screen - reverse what has been done: resize the video at its original size, the positions of origin x and y, see other items, move the Player control to which they belong.

  Fact.

  A brief look at the approach is to enter full screen mode without resize the SWF to the origin. If no further action taken - your player look as it seems at the origin: all the preserved dimensions and swf is the position where there is default (left, Center, or right). And then resize/reposition specifications.

  It will be useful.

  Thanks kglad!

• Full screen slideshow with the text of the hyperlink in browser barrier

  On my home page, I'm trying to set up a slide show full-screen in the background with pictures and the text of the hyperlink above it. How to add text to the link active Hypertext on every image of the slide, so that the viewer can choose to click one - different on each slide - and then I configure this browser fill?

  Each quick help is very appreciated!

  Thank you

  Fred

  You can add the legend for each slide, click hyperlink, external links where you want users to land on click action.

  Thank you

  Sanjit

• Page will go full screen, jump autour and the toolbar will appear/disappear and page continues to change constantly. No virus/malware after scanning

  I have a laptop and I'm going on my home page (or go to another site from this page), the toolbar will back down in full screen. I'll go into 'tools' and disable the mode full screen (F11), then the entire screen "travel" up to down and will not stop. The toolbar will start to appear, and then back again and again, do not allow me to access anything whatsoever. It will last until I have completed the task with the future manager. I ran AVG, Spybot and malware (who, after working, I uninstalled) held, and nothing was found

  It started about a week ago, and to at about the same time I started having the ' does not ' when loading a page. This has never happened before, and there is no notice of virus/malware. I think to potential problems with the keyboard of the computer laptop, but computer says everything is functioning normally.

  If anyone has any ideas, it would be appreciated. I got the microphone. Security Essentials on my system, and tried to uninstall think there could be a problem there (computer ran incredibly slow, and this problem started a week after installation), and this shows it is not completely uninstalled and I get the error message whenever I start.

  Thank you and hope that someone knows something that can help.

  I have the same problem. Need help it fixing nothing I do works. I found another case of this in 2008 but does not say how it was resolved.

• Create an image gallery full screen with MSO - breaks the other buttons?

  Hi - I am trying to create an image gallery full screen to be accessible from any available via a button.  The ultimate goal is to use my layout as a presentation tool and allow the presenter to have a "Photo Gallery" button on each page, then they would be able to access an image full screen at any time.  Most of my layouts have other buttons, content drop down, etc.  I thought that I had a great idea: create a multi-state of the first State being blank object, and each subsequent State would have an image and also a black box from full screen to a transparency of 50%.  The problem is that now my other buttons are no longer works.  I confirmed that the existing buttons will work if they are willing to be in front of the MSO image gallery, but this isn't a good solution.  Am I missing something or is there an another workaround?  Thank you!

  John

  You must put the buttons within each State of the DSO.

  It isn't really a viable long-term model, you should probably rethink it is also not good from the point of view app performance because it requires the loading of images full screen for each State in memory.

  Neil

• Reduce the buttons and full-screen are missing since the upgrade to Windows 10.

  Shortly after I installed Windows 10, Restore Down/Full screen minimize and close buttons are gone. I reinstalled FF, but they aren't there yet.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I customized my Firefox mode full screen by clicking on the option full screen. Now I do not get it back to normal even after restart of firefox and even restart my system. How can I get that back in normal view? Thank you!

  could not return to the normal display mode display mode full screen...

  Try to hit F11

• I can't get my game to play full screen on my computer. the same gamesiwantto in full screen on this computer game full screen on my othercomputers. Help

  that need to be addressed to get my gamesin mode full screen

  Hello
   
  (1) what version of operating system do you use?
  (2) game that you are trying to read?
  (3) what happens when you try to play the game in full screen?
  (4) that you get an error message or error code?

  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get a full screen when connecting to the internet, my screen display 1/4 when it is connected to the internet. I then optimize it

  How do I get a full screen when I connect to the internet, my screen appears1/4 screen when I connected mthen should maximize it?

  Three options.

  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".

  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html

• How to return to the view card when an application is in full screen mode without using the Launcher button

  Is it possible to return to the map view when you are using the full screen and more it Launcher button? This will bring this button quick exit!

  Hello and thank you for using the HP webOS Help Forums!

  The Center button is not required to enter the map view. In any position (landscape or portrait) you can slide your finger from the bottom to the top of the page, but just make sure that you start in the black area around the screen. It is a subtle and quick movement and may require some getting used to.

  I hope this helps