Function @CURRMBR with cross Dims

Similar Questions

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• Why the stop(); function interferes with another function?

  I have the code Ned Murphy to give me yesterday and it's going perfectly, but when I put the stop() function; so my frames are not crazy, this dose of code no longer works.

  The button (b4) which has this code is in a large movieclip with the other buttons, and the code is placed on the first layer in the main timeline, and not in the movieclip. So my question is... why the stop(); function interferes with this code? What I am doing wrong?

  (B4) button also has a code which is in position in the button and we have no problems with stop();

  The following code is located on the main timeline and it does not work when I put stop(); on the timeline of the movieclip that contains the button.

  bot.bott4._visible = false;

  B4.onRelease = function() {}

  bot.bott4._visible =! visible bot.bott4._;

  }

  The code that is in the button is:

  (release)

  {

  _root. Bot.gotoAndStop (5);

  _root.bott4.gotoAndStop (5);

  }

  Thank you

  Something seems wrong with the nomination that show you.  In the first set of code that you show that you're targeting bott4 as if it were a child to the bot, which means that they are not on the same timeline.  In the second set of code you bot target and bott4 as if they were on the same main timeline.

• How to call a function plugin with command line parameters

  I wrote a plugin that processes an open document. The treatment can be started by selecting a menu item in Acrobat. To start the processing of the command line, I also wrote a small Visual Basic executable file that currently a bit activates the menu command. However, I now have to pass some parameters to the plugin. I managed to call a function plugin with settings by loading the .api as a library file in the VB executable. But it seems that the entire Acrobat SDK functionality is not initialized in this way. So I can't work with the PDF file. How can I call my function plugin with settings in Acrobat? Thomas

  You must establish a form of IAC (communication monitor) of your VB application with your plugin.

  Whether COM, DDE, IPC, named pipes, shared memory files share, etc. is to you...

• @SUBSTRING function - use with if

  Hello people,
  
  I appreciate too that can help me.
  
  My problem: I have a lot of members on the dimension of accounts using numbers as the name. For example, Member "3100200", "3200100" and so on. I have to check with @SUBTRING using the IF function if the string account starts with "31" or "32". Follow below my test at Sample.Basic (standard Essbase database example) script, I check all the descendants of the measures dimension and if the current Member begins with SA, the number one is applied to cross.
  
  DIFFICULTY (' real ',' New York","100-10",@IDESCENDANTS ("Measures")")
  "Oct."
  (IF (@SUBSTRING (@NAME (@CURRMBR ("Measures")), 0, 1) == "a"))
  1;
  ENDIF);
  ENDFIX
  
  Follow the error | Caution:
  
  WARNING: 1200354 compilation error formula for [Oct] (line 4): type [NUMBER] is [STRING] ([@SUBSTRING]) expected in function [operator @EQ]
  
  ===============================================================
  
  Second test using only an equal.
  
  DIFFICULTY (' real ',' New York","100-10",@IDESCENDANTS ("Measures")")
  "Oct."
  (IF (@SUBSTRING (@NAME (@CURRMBR ("Measures")), 0, 1) = "sa")
  1;
  ENDIF);
  ENDFIX
  
  Follow the error | Caution:
  
  WARNING: 1200336 parse error formula for [Oct] (line 4): [()] without [)]
  
  ====================================================
  
  After many tests I've done, I could realize Essbase cannot 'understand' equal to compare the content of strings.
  
  Could someone help me with this problem?
  
  A big thank you and best regards,
  Wallace Galvão
  Brazil - Oracle

  I have not actually tried this, but what about something like:

  Oct)
  IF (@ISMBR (@MATCH (measures, "his"))
  1;
  ENDIF;

• IAfter last updated I have a new tab in the left bar in the header ok, black with cross and crenellated top. What is c?

  This new tab appears on the left of the search box. It seems to have appeared after the update. placing the cursor on it does not show what it is

  First of all, this search box is part of an extension of the toolbar and button / image is probably part of this extension. The image looks like a 'block the Plugins' (as a Lego building block) - so you might want to examine the functions subject to the extension of the toolbar - I can't even do a W-A-G as to what the function that is to. My guess is that it is the extension of McAfee Secure Site, which duplicates a function that is already integrated into Firefox.

  My recommendation is to reset Firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

• Can the 'scan to email' function work with Windows Vista?

  I would like to install the 'scan to email' function with my HP Pavilion dv4 laptop using Windows Vista.  Can it be done?  If so, how do I configure it?  Thank you.  Judy

  Thanks for your reply.  It turns out that I needed to download the Officejet 6500 Wireless on my PC software to operate.  I couldn't use the software that was already loaded laptop from my husband, who works in Windows 7.  If I had the software on my desktop computer, your instructions likely would have worked.  I appreciated you taking the time to answer.

  Judy

• Function of zero crossing

  Hello

  I found this passage function to zero in one of the old forums and I'm trying to understand how it works. In my case, I have two sine waves, instead of a square pulse but I can really understand how this feature works. I know that the first, the waves are generated, and then you get their attributes, data values are in the detector of passage over who controls the case statement but I do not know how the trigger time and interaval are used to build the table, I think that the timestamp outside of the loop 'for' is for the storage of the previous itteration zero crossings , but I'm not really sure. I have no idea what is happening at the final stage before the time of transition to zero are subtarcted, as in the table of threshold and so on. I read how each function separately, but I can't add the blocks together.

  So I was wondering if someone could explain how it works?

  Thank you

  Add to what crossrulz said, it helps to understand what is the code you are looking at.

  Apparently you don't understand quite what the t0 and dt.  T0 is the time at the starting point in the waveform.  There can be a wide variety of time instead of just 0.  DT is the time interval between samples.  If we multiply by dt iteration, we know how much time has passed since the first sample.  After 0, 0dt is identical to 0 s.  From there on, 1dt, 2dt, 3dt, etc. can all be calculated for a measure of time value.  But, it measures only 'time in the first sample."  If it measures only that the timestamp can be empty.  If you want to convert the time from the first sample a real time, you must add the initial time.  For example, if dt is 1s and t0 is 16:00, after 3 samples we to 2dt up to 2 seconds.  Does worry about 2 seconds or 04:00:02

  The 'picture of big timestamp' is fed into what we call a shift register.  You can use this registry to pass values between the iterations of a loop.  Before the loop, we feed a table not initialized in the shift register.  The first time that the construction is used, he fed an empty array and the timestamp to record first.  It is then output to the shift to the right of the loop register.  This value is passed to the next iteration.  It will continue until we reach the table of construction for the second time.  Now, table 1 element is introduced into the upper entrance of the table build and a new timestamp is added at the end of the table.  This will continue with the array of size n arriving at top of entry and the most recent timestamp is added at the end to make an array of size n + 1.  If we want to keep all the timestamps, we like this logic.  You could plug it into the bottom and the timestamp again upward.  That would put the most recent timestamp in the first element of the array.  You just want to include the old array so keep you all the timestamps instead of just the most recent.

• HP F4580: F4580 - no function scan with windows 10

  Computer sees not the function scan 3 in 1 printer.

  Worked without problem.

  Upgrade to Windows 10.   The printer works, cannot scan.

  The following error code:

  The scanning software was launched with invalid command line arguments

  8 [(-1,0,0)]

  I'm not technical interest.  Did someone come up with a (simple) patch?  It's very frustrating.

  I know I could buy a new 3 in 1 or even a separate scanner, but why should I?   It worked fine before, I etc. ink cartridges.  Oh I hate Windows 10.

  @Janni_b

  You must simply remove the existing printer program and install a new copy of the software.

  Printer:

  Range of all-in-one printers, HP Deskjet F4580

  Full software features:

  File name: DJ_AIO_06_F4500_140_408 - 5.exe

• 2 one-Site VPN Cisco 2801 and with crossing NAT

  Hi guys,.

  I would like to configure two Cisco 2801 using IPSEC/IKE. Both routers are connected to the internet through DSL lines. The DSL line have RFC1918 address side LAN where routers connected to the internet face. I can do NAT on DSL modems.

  Cisco IOS 2801 routers allow to configure site-2-site VPN with NAT crossing?

  Here is a model of physics/IP configuration:

  LAN<->2801 Modem DSL<-Internet->DSL modem<-Priv ip-=""> 2801<-Priv ip-=""><-> LAN

  Thank you

  Gonçalo

  Yes, you're good to go only if one or both of the sites has an IP address which is natted with private IP address statically. The implementation of IPSec on SRI NAT support in most crosses so that shouldn't be a concern

• IM have downloaded on windows 10 software adobe reader DC. Cannot install the update 15.009.20069 - gives error 1635. the drive is not all the functions associated with it - does not seem to download documents - opens in mocrosoft edge despiye moxilla fir

  I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser

  Hi Jacqueline,.

  Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Is this possible with Cross references?

  My document has 10 digits (photos, for example) while the references in the text. Due to a series of changes, I now need to remove Figure 5. The former Figure 6 must now be Figure 5, the old Figure 7 must be Figure 6, etc.. And corresponding sources of text must be updated as well.

  Is it possible with a Cross device references integrated InDesign? If not, is there a plugin out there that could solve my problem?

  Thank you.

  Ask yourself how you can configure it in the past so in the future, you can automate the process? If so, Yes. I'm doing a book with a somewhat similar feature. But it handles only the text in the document of identity. It does not change the names of the pictures that have been placed. So, if you need to rename the PSD files, I can't help you.

  But, if it is only text, here's what I do.

  My legends of the figures are numbered lists. The format is "Figure #" then on the text. They have been defined through the stories.

  When I x - ref, figure, I x - ref set to pick up the number of the paragraph but not the text of the paragraph.

  If, in your example, I had to get out in figure 5, I would take the picture figure and legend. That would leave a x - missing Ref in the body of the text. It is very good. I would like to delete it. Then the rest of the x-refs will need to be updated.

  Similarly, I could insert an x - ref. I believe that the number of car would come from its position on the text pages.

  HOWEVER, you will need to have set up at the start. It won't help later.

  PS: I hope you ask cela in the future and for a lot more than only 10 digits.

• 12 c - function plsql with clause

  Hi all

  I'm mucking around with 12 c:

  SQL> select *
    2    from v$version;
  
  
  BANNER                                                                               CON_ID
  -------------------------------------------------------------------------------- ----------
  Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production              0
  PL/SQL Release 12.1.0.1.0 - Production                                                    0
  CORE    12.1.0.1.0      Production                                                                0
  TNS for Linux: Version 12.1.0.1.0 - Production                                            0
  NLSRTL Version 12.1.0.1.0 - Production                                                    0
  
  
  5 rows selected.
  
  
  

  specifically, I'm trying to use the new functionality to a pl/sql function in the SQL statement WITH clause:

  docco here:

  http://docs.Oracle.com/CD/E16655_01/server.121/e17209/statements_10002.htm#BABJFIDC

  the example they give is:

  WITH
  FUNCTION get_domain(url VARCHAR2) RETURN VARCHAR2 IS
    pos BINARY_INTEGER;
    len BINARY_INTEGER;
  BEGIN
    pos := INSTR(url, 'www.');
    len := INSTR(SUBSTR(url, pos + 4), '.') - 1;
    RETURN SUBSTR(url, pos + 4, len);
  END;
  SELECT DISTINCT get_domain(catalog_url)
    FROM product_information;
  /
  
  
  

  and so I made my own version of the Hello World:

  with function add_number(num1 number, num2 number) return number is
  begin
     return num1 + num2;
  end;
  select add_number(1,2) from dual;
  /
  
  
  

  but it compiles just in Developer SQL or SQLPlus.   I need a version upgrade or something perhaps?

  the output is:

  SQL> with function add_number(num1 number, num2 number) return number is
    2  begin
    3     return num1 + num2;
  with function add_number(num1 number, num2 number) return number is
       *
  ERROR at line 1:
  ORA-06553: PLS-103: Encountered the symbol "end-of-file" when expecting one of the following:
  . ( * @ % & = - + ; < / > at in is mod remainder not rem
  <an exponent (**)> <> or != or ~= >= <= <> and or like like2
  like4 likec between || member submultiset
  
  
  
  
  SQL> end;
  SP2-0042: unknown command "end" - rest of line ignored.
  SQL> select add_number(1,2) from dual;
  select add_number from dual
         *
  ERROR at line 1:
  ORA-00904: "ADD_NUMBER": invalid identifier
  
  
  
  
  SQL> /
  select add_number from dual
         *
  ERROR at line 1:
  ORA-00904: "ADD_NUMBER": invalid identifier
  
  
  

  Hello

  This means that you still have the problem, even after the correction of this? Because I did not:

  SQL*Plus: Release 12.1.0.1.0 Production on Wed Jul 3 11:32:54 2013
  
  Copyright (c) 1982, 2013, Oracle.  All rights reserved.
  
  SQL> with function add_number(num1 number, num2 number) return number is
    2  begin
    3    return num1+num2;
    4  end;
    5  select add_number(1,2) from dual;
    6  /
  SP2-0640: Not connected
  SQL> connect / as sysdba
  Connected to an idle instance.
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area  263090176 bytes
  Fixed Size                  2359904 bytes
  Variable Size             205524384 bytes
  Database Buffers           50331648 bytes
  Redo Buffers                4874240 bytes
  Database mounted.
  Database opened.
  SQL> with function add_number( num1 number, num2 number) return number is
    2  begin
    3    return num1+num2;
    4  end;
    5  select add_number(1,2) from dual;
    6  /
  
  ADD_NUMBER(1,2)
  ---------------
                3
  
  SQL>
  

  Best regards

  Nikolai

• Integrating Wordpress in need of Muse dynamic height with cross domain content-based

  Given that Muse does currently not support articles and Wordpress integration I decided to use an iFrame.

  My goal is to have the height of the iframe dynamic change based on the content of my Wordpress blog. I understand that this is a common problem with frames that are hosted on different domains.

  I'm running by having more to compensate with a bunch of deadspace to leave enough room. You can also get the horrible scrolling to the search bar.

  I tried using cross-site scripting, JQuery, and postMessage but can't find out how to put the right code in Muse and Wordpress for them to communicate in either sense.

  Please, any help on this would be greatly appreciated.

  Apparently, you try to insert the iframe to another area and because of the "Same origin" security policy, you are not authorized to access the document property of the iframe object. This will not happen if the inserted iframe is on the same domain.

  Check it for more on this, http://javascript.info/tutorial/same-origin-security-policy

  - Abhishek Maurya