Function key on Satellite L500 causes Blue Screen Of Death

Similar Questions

• Satellite M40-236 Blue Screen of Death

  A few days ago, I bought a Toshiba Satellite M40-236. I hated the pre-installed Windows XP Home Edition and installed Windows XP Pro with SP2 integrated. Subsequently, I installed all the drivers provided and recommended by Toshiba of: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&teddProduct=5 38 & cmsFamily = Satellite & cmsSerie = Satellite + M40 + Seri are & cmsCategory = Notebooks & mode = allMachines & action = s earch

  Video update of Bios, drivers and so on. Everything was well worked, installed all updates from the Microsoft update site and then tried to install Windows Media Player from the microsoft site. Then, when tried to open music file in media player him wound up Windows down with the blue screen of death. After the reboot, the blue screen remained. Tried to load in Safe Mode, last good known... no result... still blue screen.

  Tried to reinstall Win XP it Recovery DVD - Rom, the same result... after that the files are copied to the HARD disk and the system is restarted, Win XP Logo current with progress bar and suddenly Blue Screen of Death :(((

  Tried to do to reinstall a different version of Windows (2000, XP Home, Xp Pro, 98SE)-no result after that it says from Microsoft Windows (during installation), the blue screen of death and nothing more... STOP: 0x0000007E or STOP: 0x0000007F.

  Maybe someone has the same? Can be any solution to this problem? I think because of the laptop is a new... maybe there's sth with RAM?

  Hello clotidle

  Well, it very difficult to tell what the problem is.
  I don t think that the BIOS is wrong because as a wrong
  The BIOS update procedure has damage to the motherboard and it is not possible to run or start anything.

  Sorry I n t have a proper answer.
  In my opinion, you should contact Toshiba service partner because I don t think that you will solve this problem yourself.

  PS: You can downgrade the BIOS t.
  Only the AEP has a possibility to do so.

  Good bye

• Satellite A65-S126 - blue screen of death UNMOUNTABLE BOOT VOLUME

  Hello

  I have starting problems in windows. He is stuck in a cycle without end start. Pressing F8 helped me freezing the blue screen of death, he said: "a problem has been detected and windows has been shotdown to avoid damaging your computer. UNMOUNTABLE BOOT VOLUME. "The end

  Technical information:
  Stop: 0x000000ED (0x89B789E0, 0x00000000, 0xC000009C, 0x00000000)

  I bought my laptop with the OS XP Home Edition already installed.

  Thank you and I hope you could help me solve this issue.

  Saul

  Post edited by: saviar01

  You can enter OS in safe mode?

• More recent Microsoft Update caused 'blue screen of death '. screenshots included, HELP Please!

  Hi, I am running Vista on an Acer Aspire M3641 and I had no problem since buying it there, until the other day, it's about 8 months.
  2/3 days ago I updated my computer with the latest Microsoft Update before closing down, went to my friends house, came back, the machine and my computer crashed at turn on. The blue screen of death appears literally for a second or 2:
  http://img69.imageshack.us/img69/6483/100220101146.jpg
  Then, a message called error recovery Windows appears, he gives me the possibility of either start Windows normally (which comes to restart the computer) or launch a startup repair.
  Upon the choice of startup, waiting a few minutes ago the repair, then the messege "Startup Repair cannot repair this computer automatically" and he asked then whether or not he wants me to send information about the problem or not that he won't let me not do anyway, but it allows me to open a window called the details of the problem :
  http://img28.imageshack.us/img28/4053/120220101171.jpg
  AND:
  http://img230.imageshack.us/img230/9734/120220101172.jpg
  After that I have no other choice other than to click on finish, and stop the pc.
  I also tried to tap f8 to start the computer in safe mode, but it is not as
  work, I don't know what to do, if someone could help me that would be greatly appreiciated!
  Thank you in anticipation

  If you are able to get in Mode safe mode with command prompt then try the items listed in this article.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Powershell 2 on Windows Vista causes Blue Screen of Death

  I tried to install Powershell 2 on my Windows Vista Home Premium (with SP2) machine. I use the Windows6 package. 0-KB968930-x 86.msu. However, in the middle of the installation, I get a blue screen of death, and the computer restarts.

  I don't know if it is a help, but the problem report displayed when the machine came back to the top is as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 1000008e

  BCP1: C0000005

  BCP2: 00000000

  BCP3: 8FB3DB9C

  BCP4: 00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini073110-01.dmp

  C:\Users\Martin Lee\AppData\Local\Temp\WER-142803-0.sysdata.xml

  C:\Users\Martin Lee\AppData\Local\Temp\WER25F6.tmp.version.txt

  Hello CodeMunger,

  You can post on the Forum of Microsoft Powershell. Click here for a link to the forums.
  They may be better able to help with your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Latest Skype causes Blue Screen of Death

  Whenever I have install/update Skype on windows 7 to the current version, I get a blue screen as I can't use older versions because he says "Skype cannot connect." Any help on any of these questions is accepted. Thank you.

  You have the well known problem of the Webcam HP HD [Fixed] .

  The last 6.16/6.18 Skype are causing BSOD on HP laptops with this installed webcam.

  You can try to uninstall the version 6.18 and install the previous 6.14.0.104 Skype version using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates.

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

  The other option is to uninstall the HP drivers and install generic Microsoft webcam drivers.

  http://community.Skype.com/T5/Windows-desktop-client/query-about-BSOD-fix/m-p/3589407#M295633

• Skype causes Blue Screen of Death after a while in a call.

  Hello, I am currently having a problem with my Skype where it will make my computer BSOD after a while in a call, it only occurs during Skype calls, not during other communications programs of voice as the voice of steam call and the blue screen is more likely to happen when I'm in Firefox.

  The blue screen error I get is "clock interrupt was not receieved a secondary processor in the time interval allowed."

  Any help would be appreciated.

  I did clean install applicable drivers and even tried to Exchange pieces of equipment (including the negotiation on an old CPU and RAM value) and no change.

  Fortunately, a solution to the problem, which has been swicthing on Google Hangouts. They work much better because there is no decrease in performance, even streaming, has more features and does not cause a blue screen after a couple of hours.

• Satellite M30X-118 blue screen of death

  Hi all. Please help me with this one. The problem I have is this. After power on and loading windows of windows (the version of picture Toshiba) will crash after a few seconds with a blue screen. Windows reports that an ATI driver fell into an infinite loop and the computer stopped to avoid damage. I use the latest toshiba BIOS (1.9), ati drivers and chipset and I did a virus scan. I also tried to reinstall windows from the CD.
  What is strange is that after 2 or 3 restarts the computer works perfectly. No more reboots and not problems with the ati drivers. I even tried a few 3D games to be totally convinced. The problem is most obvious when the computer has been closed for a long time (hours or days). So maybe it's a thing of temperature. Maybe a graphic component does not work properly in times of low start-up and after a while when the temperature rises, it's ok? What do you think?
  Finally, after the exit of the hibernation mode or standby driver ati fails and that the resolution is back to 640 x 480. A reboot but corrects this problem and I don't know if it's relevant.
  Thank you for your time!

  Hi George,.

  I don't think overheating is the cause of your problem. It resembles a suspect hard drive. Usually after a period of inactivity the drive has problems reading of the driver file.

  You could try to reload the ATI driver (this should load the driver to a different location on your hard drive) and see if the problem persists.

  You disk defragmentation will not help because the drivers are usually installed in a non-transferable area of the player.

  I strongly recommend to take a safe backup of your user data at the earliest.

  HTH

• Function key on Satellite L500-1dt - cannot activate WLan

  This problem started earlier today and I can't seem to find a way to solve it.

  When I use the FN key on the laptop to the feature menu will no longer appear so I cannot turn my wireless back on which is the only thing I use the menu functions for...

  Are there solutions to this problem or just a way to turn on my wireless without using the function menu?

  See you soon

  You need to update/reinstall utility package of added value and the Flash card support, then:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  It will be better if you remove the previous installed Vap and utility of flashcard to your laptop support

• Satellite A500: BSOD (blue screen of death) - Solution

  Hello

  Well, I am engineer in Instrumentation and also related to the field of computing. In recent weeks, I see that many people in the world are stuck on this problem of malfunction or failure of the graphics card driver.

  Recently a friend brought me his laptop A500 solve this problem and the solution works very well with him for the last day 10.
  We test the laptop using games, movies n everything and it works very well!

  _ * Solution: * _

  _Step1: _ Just bring back your little of lower resolution graphics of full (my thought is its quite possible that a500 LCD or graphics are mismatch so a good step to avoid this problem is to decrease your resolution no need to change the default settings of the graphics card)

  _Step2: _ change your windoes7 to windows Basic theme and only change the wallpaper if you want (although I'm not sure this step because this step has no logic behind but maybe since windows7 use new programming so maybe a possibility that graphics files are in conflict with drivers)

  I hope that my solution will also help u, as it has done for my friend and those you spend money on the a500 will not feel say heart :)

  I wish you good luck please do not hesitate to write me at shah_khan_2k2 at yahoo dot com If this method fails for you

  Concerning

  Hello

  In my opinion, your experience will be useful to other users also.

  Welcome!

• Satellite L450D - 13 X - black screen of death/Blue Screen of Death

  Hello everyone.

  I have a Toshiba Satellite L450D - 13 X for children, and for the price it's a good laptop. Have had no problems with it until two weeks ago, when the screen froze for boys while playing a game and downloading a program on the net. Had to make a stop of force and since then, we have a BSoD on each startup. That's what we tried:

  On "Starting Windows", we are given the option to either 'Launch Startup Repair' that ends as BSoD or "Start Windows normally" who returns to the list of option "starting Windows."
  Any attempt enter 'Safe Mode' BSOD results.
  Attempt to boot an ISO of the disk recovery Windows on a USB key (we did put highlight and make promotion up) results in BSoD. Borrowing a correct installation of Windows 7 DVD and highlighting what an option cause BSoD.

  In fact, the only option that we used who threw something different has been using advanced startup options. On one of these options, we've got the Blue Screen of Death with the following information:

  Unmountable_Boot_Volume
  Disable memory the Bios Options such as cache/occultation

  Technical info

  Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0000000000000000 0 x 0 x 0000000000000000)

  I don't mind erase the hard drive and leave, there's nothing on what is essential. Very, very well, I'd appreciate a steer on it. Checked the Web for things and nothing seems to help for other options. I'm not particularly tech literate but can follow directions.

  Thanks in advance.

  It is really possible that the HARD drive is faulty.
  If possible try to get another same HDD used for test purposes and install OS using the Toshiba recovery image.

  A friend of mine had a similar problem and after Exchange of HARD drive, everything went well again.

• On firefox memory leaks cause blue screens?

  On firefox memory leaks cause blue screens?

  If you encounter blue screen crashes, this majority refers often to an incompatibility with a device driver, especially the graphics drivers. Go to Firefox Safe Mode and disable the use of Firefox hardware acceleration of graphics.

  Assuming that Firefox is closed:

  Hold down the SHIFT key when you start Firefox. You should get a small dialog box. Click on 'Start mode safe' (not reset).

  (If Firefox is running, use Help > restart with disabled modules to call the dialog box.)

  In Firefox, open the Options of the Advanced tab dialog box:

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will take effect after you exit Firefox and start it up again (in normal mode).

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Satellite A500-1GH blue screen when copying to usb drive.

  Hello everyone

  I'm new to this forum and I need your help.

  I have a new toshiba Satellite A500-1gh with windows 7 ultimate 64-bit.
  It works perfectly, but I have problems when im trying to copy to my/on my portable usb drive.

  He copy some data and then blue screen of death.
  I tried to check my RAM with memtest, but it restarts my pc once he starts the first tests.

  Can someone help me?

  Hello

  Is it only happens using USB drive?
  Have you tried other disks USB, key USB flash or other USB devices?

  > I tried to check my RAM with memtest, but it restarts my pc once he starts the first tests.
  Hmm... It's strange...
  The problem of memory could be responsible for BSOD, but if this BSOD appears only using USB drive then I would recommend testing other external USB HDD.

  You should also try to update the driver from chipset since the chipset USB ports driver controls

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.