Installation of Powershell 2 on Windows Vista causes Blue Screen of Death

Similar Questions

• window vista boot blue screen stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Cannot start PC, using Windows vista, download blue screen error stop: 0x0000007b (0x81e03ba0, 0 x 0000034, 0x00000000, 0x00000000)

  Hello

  1. do you get this error on startup or when working on the computer?

  2. are you aware or any hardware or software changes to the computer?

  Try to start the computer in safe mode and try to make a System Restore.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  In addition, try and run the steps listed in the link below.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly:

  http://support.Microsoft.com/kb/958233

• Windows Vista, several blue screen errors

  Original title: BSOD

  Good afternoon

  I have the BSOD. Here they are in chronological order:

  1 IRQL_NOT_LESS_OR_EQUAL 0X0000000A (0X0000001D, 0XFFFFFFC2, 0X82424EF8, 0X00000001)
  2 0X000000c4 (0x000000A0, 0X96AEEA58, 0x995FCEE0, 0x0D99EEE4)
  3 0X000000c4 (0x000000A0, 0X968F0DF0, 0x99406EE0, 0x053F1D0A)
  4 0X000000c4 (0x000000A0, 0X9A651638, 0x993C4EE0, 0x10AB65F8)

  Additional information:

  Windows Vista Service Pack 2

  DualCore Intel Core 2 Duo E8400 3000 MHz (9 x 333)

  Gigabyte GA-G33M-DS2R (2 PCI, 1 PCI-E x 4, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, Gigabit LAN)

  DDR2-800 DDR2 SDRAM

  BIOS: Award BIOS v6.00PG Modular

  Could you help me... don't really know what to do...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• More recent Microsoft Update caused 'blue screen of death '. screenshots included, HELP Please!

  Hi, I am running Vista on an Acer Aspire M3641 and I had no problem since buying it there, until the other day, it's about 8 months.
  2/3 days ago I updated my computer with the latest Microsoft Update before closing down, went to my friends house, came back, the machine and my computer crashed at turn on. The blue screen of death appears literally for a second or 2:
  http://img69.imageshack.us/img69/6483/100220101146.jpg
  Then, a message called error recovery Windows appears, he gives me the possibility of either start Windows normally (which comes to restart the computer) or launch a startup repair.
  Upon the choice of startup, waiting a few minutes ago the repair, then the messege "Startup Repair cannot repair this computer automatically" and he asked then whether or not he wants me to send information about the problem or not that he won't let me not do anyway, but it allows me to open a window called the details of the problem :
  http://img28.imageshack.us/img28/4053/120220101171.jpg
  AND:
  http://img230.imageshack.us/img230/9734/120220101172.jpg
  After that I have no other choice other than to click on finish, and stop the pc.
  I also tried to tap f8 to start the computer in safe mode, but it is not as
  work, I don't know what to do, if someone could help me that would be greatly appreiciated!
  Thank you in anticipation

  If you are able to get in Mode safe mode with command prompt then try the items listed in this article.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update and Blue Screen of Death

  Hello

  I use a laptop ASUS X550C of windows 8.

  The problem that seems to have the laptop is blue screen of death after a second batch of updates.

  I think that some updates are not compatible with the hardware, but I don't know which.

  Kindly help as soon as possible.

  Thank you

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

• Error KERNEL STACK INPAGE ERROR on Windows Vista SP2 blue screen

  Original title: KERNEL STACK INPAGE ERROR

  What can cause a crash with the KERNEL_STACK_INPAGE_ERROR message in a blue screen.  Ive had just a new hard drive installed.  Running Vista Home Premium with Service Pack 2.  Usually occurs when returning from standby or Hibernate mode.

  Hi JerryHines,

  This problem can occur if a requested page of kernel data could not be read on the paging file into memory, or the master boot record is infected with a virus.

  Method 1:  I understand that you have installed a new hard drive, run the disk check to repair bad sectors on your hard drive

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: Disable and re-enable the hibernation, see them steps outlined in the article below

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  For more information, please visit the link below

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article applies to Windows 7, not valid for Windows Vista)

• After clean install updates vista cause blue screen of death__

  After that a clean install of vista cds coming from the laptop of dell computer purchase fine until I install 80 updates of windows. I get blue screen when restarting updates but passes so fast, I can't pause to read. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• XPS M1330 (video) graphics card NVIDIA 8400 M GS - Windows Vista crash (blue screen)

  Hi, community

  I have a problem with this adapter. As soon as I plug the windows (vista) HDMI cable crashes and I get a 'blue screen '. I tried everything and nothing worked. The driver is version 7.15.11.5655 dated dated 23/08/2007.

  Any information will be helpful!

  PS - I tried to download the update of R180763 site of Dell, but I get an error when unzipping (110 error code).

  Rgds

  / Nairo

  
  

• Latest Skype causes Blue Screen of Death

  Whenever I have install/update Skype on windows 7 to the current version, I get a blue screen as I can't use older versions because he says "Skype cannot connect." Any help on any of these questions is accepted. Thank you.

  You have the well known problem of the Webcam HP HD [Fixed] .

  The last 6.16/6.18 Skype are causing BSOD on HP laptops with this installed webcam.

  You can try to uninstall the version 6.18 and install the previous 6.14.0.104 Skype version using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates.

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

  The other option is to uninstall the HP drivers and install generic Microsoft webcam drivers.

  http://community.Skype.com/T5/Windows-desktop-client/query-about-BSOD-fix/m-p/3589407#M295633

• Skype causes Blue Screen of Death after a while in a call.

  Hello, I am currently having a problem with my Skype where it will make my computer BSOD after a while in a call, it only occurs during Skype calls, not during other communications programs of voice as the voice of steam call and the blue screen is more likely to happen when I'm in Firefox.

  The blue screen error I get is "clock interrupt was not receieved a secondary processor in the time interval allowed."

  Any help would be appreciated.

  I did clean install applicable drivers and even tried to Exchange pieces of equipment (including the negotiation on an old CPU and RAM value) and no change.

  Fortunately, a solution to the problem, which has been swicthing on Google Hangouts. They work much better because there is no decrease in performance, even streaming, has more features and does not cause a blue screen after a couple of hours.

• Function key on Satellite L500 causes Blue Screen Of Death

  OK, I have a Satellite L500 and I got it in December 2009. Since I got it, if I ever press the function key the BSOD appears and the computer restarts. I put t in particular use the key function often, but it of just in case I press the wrong button and it s a nice feeling not not to have a button of computer laptop-suicide haunts my keyboard.

  Also if I decide to close the laptop completely and turn it back on at a later date, it of likely that it will be displayed as well. I have no idea as to why this is, but any help would be appreciated.

  Thank you very much
  A. Mcstea

  >... a computer laptop-suicide button...
  :)

  Do you mean the FN key?

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Vista crashes, the screen becomes pink with diagonal dotted lines

  My HP Pavilion DV9500 laptop started making a few months ago:

  The computer and the programs sometimes simply freeze, sometimes the screen becomes a light pink with diagonal lines dotted, and sometimes the laptop itself restarts without warning.  The computer is about 3 years old now and have not had any problems before this.  I tried to do a clean install of the recovery feature that I don't have a Vista disc to reinstall from, and he always does this.  Sometimes the computer will be fine for a few hours and sometimes just after the start it will freeze.  A couple of times too, as it starts, Windows will not start and it will say "Not found operating system".

  Hello

  It sounds like imminent hardware failure/issues. Since you did a clean installation of recovery
  pretty much excludes most of the causes of software if it could be driver related and there are other
  possible causes remotely. Video/display and its drivers are suspected leader and mother.
  Board and power supply.

  Keep good backups and check with a real store of the computer (not the leeks and glances at a BestBuy, etc.)
  BigBox stores) or the manufacturer of your system Support.

  ===============================

  It's my generic convenience store and eventually it can help you determine the cause but I strongly
  suspect material.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.