Function module aka Mod or %

Similar Questions

• There will be a conflict between the two functional modules of a 2010 Biztalk adapter pack?

  Hello

  We already use a free version of SAP Business Suite (32-bit adapter) to suck SAP data.
  We are now upgrading all SSIS packages with the 64-bit Biztalk adapt pack 2010 and have few questions about it. It works successfully.
  Question 1:
  In my direct SAP, I installed the function module and my old 32-bit adapter works. As part of the migration to the new 64-bit adapter, I give myself with new functional module in SAP that I put in the SAP test area. To migrate all my packages, I have to start to move from one card to the other, and both must function in the SAP LIVE system module. If this is the case, will there be conflicts over the 2 functional modules working for 2 different cards (32 & 64 bit)? If my transition period is 4 weeks, these modules can still work?
  Question 2:
  If this works it cause any impact in the production SAP system at all? I don't want daily data extraction to cause an impact at all.
  Please advice. I'm unable to find any relevant article on this.
  Thank you
  Mani
  Original title: biztalk adapt pack 2010

  Hi Vincent,.

  I would have you post your query in the MSDN forums, because it is addressed to an audience of it professionals.

  Your request would be more out there.

  Check out the link-

  http://social.msdn.Microsoft.com/forums/en-us/sqlintegrationservices/threads/

  Get back to us if you have questions about Windows in the future. We will be happy to help you.

  Thank you.

• How can I restart you with active modules (Normal mode)?

  I clicked on restart with disabled modules. Success.

  Then I tried to restart with the active modules - but it is not an option for that. I expected "Restart with disabled modules" have changed to 'Restart with active modules', but it didn't.

  It is not possible to activate them manually.

  Grateful for any help, urgent if possible! Thank you.

  If you went to help-> restart with Add-ons disabled, that puts you in Mode without failure of Firefox used for troubleshooting. All you have to do is to close Firefox then open a new instance of it.

• Function module

  Hello
  
  Is there any function modulo in essbase?
  example:
  Y = 10 mod 5
  
  How could I do in essbase? Any resolution would be grateful.
  
  Thank you
  
  
  Joni

  http://download.Oracle.com/docs/CD/E10530_01/doc/EPM.931/html_esb_techref/funcs/mod.htm

  @MOD (mbrName1, mbrName2)

• How to read the NI 9201 Module lab mode analog input signal

  Hi all

  IAM using the module Crio-9012 real-time controller

  ND iam using NOR-9201 for entry and exit of NI9263 for

  I have configures cRIO 9012 on my Pc

  But how I'll take analog input using the module NOR-9201

  Thank you

  TC

  Hello

  I recommend you take a look at the following examples in the example Finder LabVIEW.  If you go to help--> find examples, you will see this window.  Just search 9201 and you will see 2 examples:

  

  I hope this helps!

• On startup, I get the error message: you function in script mode. How to fix the error message

  I get a message whenever I play computer games, you are in mode script, how to you get rid of this

  original title: How to reboot my computer

  Hi KathyHernandez,

  Here is a link to some steps that should take care of this issue.

  http://support.Microsoft.com/kb/308260

  Hope this helps,

  Eddie B.

• LR CC develop non-functional module

  I downloaded Lightroom CC library works well but when I take a picture in the develop module the screen goes blue (opaque) with white lines through diagonally. How can I fix it?

  Disable GPU acceleration as follows.

  Edit > Preferences > Performance tab, uncheck 'use graphics processor '.

• Make the change in functionality modules if I put everything: the default configuration values?

  I was wondering if I could clean up my old FF of database/values.

  Can I set all settings by default in: config without any problems with my Add-ons?
  How can I fix: default config?
  Do you have other tips to make my cool FF as new without exporting all my data and then reinstall everything?

  Thank you!

  You can delete the prefs.js file in the Firefox profile folder to reset all default prefs and start from the beginning to make changes.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences
  • Help > troubleshooting information > profile directory: see file

• dv7-4170us: Notebook dv7-4170us with upgrade of windows 7 to windows 10 has no function in sleep mode

  Monitoring upgrade home premium from Windows 7 to windows 10 online, I had 2 questions

  Question No. 1:

  No sleep in windows 10 button.

  After a search on the Microsoft support Web site.  The problem was later no graphics driver available for my diamond graphics card came with the laptop.  procedures was to go into Control Panel, Manager of devices, select the graphics card with the left button, then right click and select update.   The search is empty.   I've searched the manufacturer and find out the graphics card model has been abandoned.  My roommate has bought a similar laptop, the lower end, in 2011, it was no problem.

  I am running in a loop here.  My laptop is out of warranty, my graphics provided by HP is interrupted and no graphics driver for windows 10.  Other then replacing the card. Woud HP offers a free replacement graphics card?

  Question 2:

  My fingerprint reader no longer works.  I reset all my fingers.  I select when connecting. It will be the first screen, but the following is your hotmail username, it will no more go to the destop.   In Device Manager, windows detects it ok, but it seems that there is no window of 10 for her windows software.  On this subject, which would be my option?  Is Hp has a configuration software for fingerprint reader windows 10, if not, what free software would be compatible for it?

  Hello

  No available drivers for Windows 10. Well, it's not too late to go back to Windows 7. You have 30 days.

  Kind regards

• Call function module

  
  

  Most likely, the problem is that you specify a complete and absolute path to the DLL. Also, you don't need to set the Cheminaccesfichiersource property. This property specifies the source (.c) file for the service and TestStand he uses to edit and create Code features of the Code.

• scan with ni9401 mode

  Hello, I use the scan mode and the module ni9401, and I'm under codes in labview with a timed loop

  When I try to change the loop timed to dt = microsec and scan period<1ms in="" compact="">

  Compact rio is disconnected! why I got this problem?

  Maybe I can use scanning with scan time mode<>

  Hi, mariomoskis,

  Unfortunately, this is part of the limitation of the scan Mode. You can basically think of scan mode as a train that toured all the modules collects data and it falls on the drive and there is only 1 train for the entire system and it runs at a speed (scanning speed). The fact train one passes each interval of scanning speed, so if you want to produce a train of pulses to a little less than 1 kHz you will get aliasing. However, cRIO should unplug any, I don't know what the problem is here, but it seems closely related.

  There are two solutions to this problem, but the two would require changes.
  1. you can avoid all these problems and the resolution time get down to a 25ns (or less) If you set the mode FPGA. We can use the existing code of NI.com/IPnet to implement a pulse generator to train with the custom calendar settings and pulse on any module.

  2. some modules support digital modes specialized, making essentially a pre-built section of the FPGA code (in scan mode) that support some common functions such as Pulse Width Modulation. With these modules, you can request a rate (which will update at 1 kHz)-specific, but the actual timetable for the module is managed at the hardware level. There are only a few modules that support it, and they are listed in the link below.

  KB 55L06EMO: what Support Modules of the series C, specialty digital functions in Scan Mode?
  http://digital.NI.com/public.nsf/allkb/2664A3D35D9F79A4862576B300277E35?OpenDocument

  I hope this helps.

  Saludos!

  Jesus

• Benefits of control MOD

  Hi all
  
  What is the use of MOD order in the query.
  There performance benefit.
  
  Rgds
  Saaz Ena

  Saaz Ena wrote:
  Hi all

  What is the use of MOD order in the query.
  There performance benefit.

  What performance gain?

  It's a mathematical function "module", that's all...

  SQL> select mod(10,3) from dual;
  
   MOD(10,3)
  ----------
           1
  

  Use you it when you need the module calculated. It's not about performance, but simply to be a built-in function. So he can affect performance at all, there is no reason.

• Added Yahoo Toolbar and Add-ons Manager no longer shows the extensions one I can't access the function "get addons".

  I added a Yahoo toolbar for Firefox that has been customized for Frontier Communications. I Ghostery installed as an add-on, and she flashed a message that Yahoo toolbar confused its effective functioning and I would like to disable or uninstall the toolbar. I open the Add-ons Manager to do and much to my surprise he now showed no extension at all, but they all seemed still works! All my plug-ins appear when I look on the Add-ons Manager. I checked the "Get function modules and it tries to load but does not succeed." I am running Firefox 10.0.2.

  Please also try to delete the extensions.* files in the right out of the Firefox profile folder. Firefox will recreate the files and information. Please note that at the next startup, Firefox can request permissions, opening several tabs with each tab corresponds to a detected extension. Select allow the installation, click continue, but click on restart only on the last tab. You can also try to leave out the suspects without selecting modules and continue. I hope it will solve the problem.

  Files & Firefox profile folder

  Another way would be to try a new profile. Firefox stores the data from profile/personal separately from its installation folder. If the new profile is correct, you can later copy/replace files of the old profile in it, for example. the places.sqlite who holds history + information of favorites, the folder of bookmarks which has backups dated only bookmarks, signons3.txt + signons.sqlite which are necessary to restore successfully a saved website names to user/passwords etc. Please note that in this case, although it is also possible to copy the extensions it may be preferable to install again via Tools > Modules search box or AMO.

  Profiles Howto

• My search function has been hijacked. Whenever I try to click on a relivant search it goes to a completely independent website. I deleted firefox and reinstalled but it did not work. This will not occur in Internet Explorer. Please help, I don't want to u

  My browser to search was hacked, how do I get rid of this. It does not work in Internet Explorer. Please help cause I don't want to use IE I don't have to.

  I have tried different anti virus programs but its still here.
  

  Michael

  Install, update and run these programs in this order. They are listed in order of efficiency.
  (Not all programs to detect malware, you may need to run them all to solve your problem.)
  These programs are provided free for personal use, but some have limited functionality in "free" mode - but these are the features that you really need not to find and eliminate the problem you have.
  
  Note: If your malware infection is bad enough and you're poorly led to URLS other than what is displayed, you may need to use another PC to download these programs and use a USB stick for transfer to the afflicted PC.

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  
  SuperAntispyware - http://www.superantispyware.com/
  
  AdAware - http://www.lavasoftusa.com/software/adaware/
  
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  
  Windows Defender: Home Page - http://www.microsoft.com/windows/prod.../default.mspx
  
  In addition, if you have a re-direct search engine problem, see this:
  
  http://deletemalware.blogspot.com/2010/02/remove-Google-redirect-virus.html

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  
  http://www.spywarewarrior.com/index.php
  
  http://Forum.aumha.org/
  
  http://www.spywareinfoforum.com/
  
  http://bleepingcomputer.com

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.