Fusion 8 trial goes wrong - Win8.1 VM, imported from Parallels, does not start

Similar Questions

• HP Compaq DC7800 does not start properly (fan is going crazy)

  Yesterday I wanted to add a TV tuner card to my DC7800, but after that, I saw that the power of the tuner (no PCI) card had disappeared. I decided to shut down the computer and run it. I would work out the power cable later.

  Since then, the computer does not start really. Looks like it starts and the fan starts to turn. After some time, the fan goes completely wild! There is no beeps of the main card. So, it seems that BIOS does not either.

  Please help me!

  Next: is it possible to get the answers here notificiations email?

  My apologies for not responding earlier!

  I have fixed the problem. I removed the firewire card and then started the pc. After that I insterted the card firewire again and both times the computer still worked.

  Probably what happened is this: I had the tunercard connected to the firewire card, but no power supply again. Most likely the tunercard was draining the energy of the firewire card and this way the power supply of the computer has become a sort of State course...

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Animate CC trial does not start

  Hello, I downloaded the trial version of Adobe animate CC of the creative suite.

  As soon as the finished cloud to download and install, whenever I try to load the program, the mouse cursor indicates the wheel "load." But then animate does not start, or the loading image. Nothing happens.

  I don't really know what to do, I need help.

  I have win 7 pro.

  8 GB RAM

  500 GB of memory

  Six CPU cores AMD FX (tm) - 6300

  video card: AMD Radeon R7 200 Series

  Thank you

  If you used the right click to run as administrator, and he has failed, contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

  I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

  Download from Download Photoshop Elements | 14, 13, 12, 11, 10

  Install and enter your serial number.

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• Trial version does not start,

  
  

  Trial version does not start,

  I see the logo but is the program not resonding, Installation 3 x
  still nothing.
  How can I run the program

  I work with Windows Vista 32-bit SP2,

  
  

  Best regards Jan-Paul Slinkert
  

  Right click > click 'run as administrator '.

• Update Mac OS, now VMWare Fusion does not start

  I upgraded to Mac OS 10.4.11 on Intel MacBook Pro and now VMWare Fusion does not start.  I've since installed, uninstalled, and reinstalled to Fusion 2.0.2.  That did not help

  I have attached the logs from VMWare. Any suggestions?

  John

  Hi John,.

  I checked your logs - thank you for them!  That you use in an accident in one of the Apple libraries (OpenSSL, to be precise), which uses VMware Fusion.

  I see a number of Mac OS X 10.4.11 users complain about the accident even in iTunes:

  http://discussions.Apple.com/thread.jspa?MessageID=8254606

  http://forums.Macworld.com/thread/105826

  They claim that the installation of the latest Apple security updates (they specifically mention 2008-007) solves the problem.

  Can you try to install the latest security updates, and let us know if this fixes the bug Apple?

  Thank you!

  Ben

• 4.1.1 Fusion on Mac OS 10.7.3 does not start XP, W7 or Ubuntu after recent updates

  I don't know when this happened precisely because I have not used 4 Fusion in awhile, but I just tried to run the merger and not my memory starts virtual disks. I have 3: Windows XP Pro, Windows 7 Pro and Ubuntu. When I run one of them, I get the error: "could not open/dev/vmmon: no such file or directory." Please make sure that 'vmmon' kernel is loaded. "Can anyone help? I'm under 4.1.1 Fusion on Mac OS 10.7.3.

  Hi tonyinthecityand welcome to the VMware communities!

  We're actively investigating a problem causing a Fusion 4 + Lion host machines to frustrate dynamically load our extensions of kernel (including the vmmon kext) at the right time.  As much as it pains me to say it, restart your host machine might get your VM will once again at least until you leave next merger.

  You can quickly give that a try and see if it's going you again?  If so, rest assured that we do not consider restart to be a long-term solution... we are looking on the problem.  If it does not help and your virtual machines will not immediately work after the reboot, after return and we'll continue troubleshooting.

  I hope this helps!

  --

  Darius

• Fusion drive does not start?

  • MacBook Pro mid-2009
  • Running OS X Yosemite
  • 320 GB internal HARD drive
  • replaced the optical drive with 240 GB SSD
  • replace the 4 GB of RAM with 8 GB of RAM

  After the replacement of my optical drive with an SSD, I booted the laptop and checked the disk - it showed up as a normal external drive. I then, in accordance with the guide to formatting a drive of Fusion (combined capacity of the two HDD and SSD), found here, booted the laptop into recovery mode at the entrance to the commands in the terminal. the commands I entered were the following sequence

  diskutil list

  diskutil cs create disk1s2 disk0 [ArbitraryName]

  diskutil createVolume [UUID here] jhfs cs + [ArbitraryDriveName] 100%

  After that, my records indicated were over 240 GB SSD and Macintosh HD 320 GB but Fusion drive 560 GB - I thought: Hey! great, it worked... However, when I restored it to my time machine to the top of my 3 TB external hard drive, which took a few hours, I was met with the error gray screen instead of a login screen.

  I have my time machine to the top, so im not worried about my data, but when I was able to boot into recovery mode (when it is connected to 3 TB external HD) I deleted the Fusion drive and tried to reinstall a new OS from Yosemite, but of course this returns the same error as before starting. This leads me to believe something is damaged with the fusion drive, maybe its lack of OS startup, but would not restore or reinstall OS to solve this problem? I ran a diagnostic on the drive of fusion are deleted and it gave me the error code of output 8. I will update with a screenshot of the Terminal

  What can I do to cancel my fusion drive and try to start over again?

  any help would be greatly appreciated...

  I don't know about you, but I thought that the HARD disk must be placed in the Bay of optics and the SSD drive in the HARD drive Bay where the original HARD drive is.

  So, have you tried to reverse the readers in the bays (SSD in a drive Bay HARD and HARD drive in the Bay optical) and recreate your Fusion drive and then either restore or install OS X?

• MY COMPUTER DOES NOT START, NOT EVEN WHEN YOU TRY TO PUT IT IN SAFE MODE, EVERYTHING GOES TO A BLACK SCREEN, PLEASE HELP ME!

  OK, so last night, my computer was freezing up so I held the power button down to turn off, I turned it back and he asks me if I want to start in safe or just normally.  I chose because it starts as usual, it's just sitting there, it goes through the motions as it will start but it never does, I went to sleep woke up to the top and all I have is a black screen with mouse pointer again, nothing has changed, the same things happen when I try to start it in safe mode.  I tried to get the disks it is came up with, but the computer seems to not even acknowledge that they were never inserted, I don't know what to do, can anyone help me, I'm sitting here on the laptop of my bf and I am interested in this black screen with the pointer of the mouse in the Middle, I don't know what to do...

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installed new module memory for laptop, found original was bad, while windows Vista does not start by going blank after the "status bar".

  I have a Windows Vista running on a Sony VIAO laptop and has been updated with level 3 to 4 GB of memory. During the memory test, I found that 2 GB of original module was bad and replace it with the new 2 GB module end back where I started with 3 GB. However, Windows starts only at a little past the rectangle with 3 points moving ("State Bar"?) and them it goes to black and the desktop never appears. I tried to roll back to the last working version of Windows settings, but always the same results.

  What can I do now? Is there a way to check and fix disk errors?  Is it possible to install Windows XP Pro or I have to go to Windows 7.  I even has System Mechanic Pro running on this laptop and it did help some casued the problem. It's as if the disc is damaged for some reason any.  Only with Vista felt this helpless.

  It seems to me that the new memory you have installed is bad or incompatible with the system.  First, remove all chips and reinstall them and then try to make sure that they are correct and secure again - don't just press them in place, effectively remove and the replacement and make sure they are in the right direction.

  Boot from the Installation of Windows Vista genuine disc (or you can borrow from someone) or a recovery disc with recovery options included in this topic. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer, or perhaps in SafeMode with network if it does not - that would be a good sign if it is true). You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.  Select recovery options and follow the instructions until you see the menu.  Once there, select the Windows Memory Diagnostic tool and run it and see what it says.  If it detects problems (and I suspect it might), you may need to replace the new chip memory.

  I hope this helps.  If this isn't the case, after return and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• I am trying to download a free trial of first pro, but it does not start the download.

  Hi, having some problems the trial download. What is creative cloud that does not?

  Hello

  Please see the system requirements for pro first: -.

  System requirements | Adobe Premiere Pro