Fusion Audio / video in CS6 - same as CC?

Similar Questions

• Satellite C855 - 2fc w / Windows 8 - audio/video trolling and buzzing

  For the past week or so I have experienced a problem audio previously unencountered with my Toshiba Satellite C855 - 2fc (windows 8 OS).

  I had the machine since mid-February, but it was only recently that I found that whenever I try to read multimedia files through any player - mainly Media Player Classic with CCCP codecs, VLC and iTunes, but also when streaming video and audio line - everything I watch/listen to will sometimes meet a hum and that for a brief moment it blocks on a time of audio/video of the same way as shown as in this video:

  http://www.YouTube.com/watch?v=CF9Pvdsz0UM
  (not my video or on the same make of the machine, but the symptoms are exactly the same)

  Although it is extremely annoying this happens particularly often - well that the time is not entirely predictable, I've found that when you listen to a podcast, it would occur about every forty minutes - I'll post again after trying time during video playback.

  Whenever it happened I already had the the Task Manager ready and waiting, but so far I have not noticed any jump in CPU or anything whatsoever on the performance tab or anything that would stand out as being abnormal.

  I'm lost as to what to do about it and what could have caused this--suddenly, it started happening so I thought that there might be a possibility of a windows update or some such thing to happen, but while they inspected my audio driver status in Device Manager I saw that the option to go back to previous versions has been grayed out indicating that they had not been modified since I first used the machine, which means one of the indices only I had as to its possible causes has been removed from the list.

  I spend most of my time watching some stuff on my laptop and it drives me crazy so if you help me to solve this problem, I love you + forever +.

  Hello

  Here are a few comments on the youtube page regarding this video, and some people have already solved this problem. But it wasn't always the same solution.

  A user solved this disk defragmentation HARD running and this contributed to this day

  Others used a software called malwarebites pro.
  It seems that this software one causes some delays during which crisscross the audio.
  You have this software?
  If so, uninstall the pro malwarebites check how it will work.

• Fusion audio and video, all clips / takes both

  Hello

  I am looking for a possibility to synchronize all my video clips with audio recorded external at the same time. Audio of a video have the same TC to synchronize.

  Selection of all media, the merge clips option is grayed out. Select a video and audio file, which works fine, but I don't like to do it manually for each clip.

  I just got the trail from the eyes of the plural, but here it does not work.

  Thank you

  Johannes

  I found a nearly quick workaround that works if audio and video have the same TC:

  1. Select all audio and video clips

  2. choose Create sequence multicam

  -> which puts each correspondent audio and video in a clean sequence

  3. Select all the new sequences a sequence open right click in the timeline.

  4 drag and drop the audio and video of the timeline in a tray

  -> which creates the merged clips

  5 remove all sequences of blocking

  It takes about 5 s by video footage and a bit of media management.

  But this should not be a big deal to implement this feature in first. So lets make a feature request!

• Fusion audio and video clip

  Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?

  richardb

  So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote

  I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.

  What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.

  I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.

  Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?

  If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.

  Please consider.

  Looking forward to hear your progress as your schedule allows.

  RTA

• Audio and video on the same page.

  Is it OK to have a separate audio and video file on the same page?  Both are on AutoPlay without control, but when I try this audio setup crack to override the video, stopping the video a few seconds later.

  I guess I could try and integrate audio into video but if I had not I was not.

  Any suggestion or help is appreciated.

  Thank you

  Ryan.

  You can't play both audio and video at the same time, you will need to merge them.

  Neil

• Audio/video synchronization

  Please help me!

  I have an audio which is about 11 minutes long, and I created snippets of text that correspond with the audio in Flash CC...

  Well the problem well, I have, is that the Audio desync on 3/4 through the video goes.

  I changed the frames per second of the lower to the higher that the orginal executives will blink

  During which is 24 frames per second, which ends just turn off syncearly on in the video, the whole

  video, or the complete opposiste.

  I did however read some discussion forums and saw mention of maybe...

  Cut the audio in two, then imporiting them one after the other and the lining of the text to the top of this way?

  This issue occurred when I export it to a swf file and the mov file...

  It happens when I play the files directly from the desktop and even after download

  on the internet... which is exactly the same thing, so I don't think it has to do with the download

  it to the internet. The audio file is an mp3 file.

  Any advice on this problem magnified will be

  much appreciated! Thank you very much!

  -Michael Hammer

  To avoid stepping on the toes of kglad somehow, but for what it's worth, the Flash has a problem with going out of sync because it is by default and true 24 fps video is played at 23.98 so more time he wil probably falls out of sync regardless of action script as far as I know. Why Adobe does not have a true 23.98 let only guess but it probably falls somwhere between why they refuse to fix the tool brush, or the vector exort, or got rid of the deco tool and ease to functions. Oh, and why they decied to exexplicitly change the plugin to zxp mxp extension. Maybe it's to keep us on our toes. Who knows. The best way to relieve this is to break up your movie into scenes, export them individually and restore via Final Cut Pro or Adobe Premiere. That's what the studios. It would no doubt be your laptop is not able to play in sync as well because there are a lot of graphics card and processor grinding going on when a computer play video. CC of Flash is also as a last note, FAR better export video Flash CS6, so if you plan to do this frequently, you can upgrade.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Satellite L755 - problem Audio/video using the WLAN connection

  Hello

  Recently got a Toshiba L755 and have a problem with the playback audio & video since I got it.
  I've updated the latest drivers for the Conexant HD Audio card and it made no difference.

  Essentially during playback there are a sound intermittent distorted during playback mp3, video playback and online stream.

  I tried different programs and the same thing, however, when I have a LAN cable presents no problem - it's only when I'm connected to the wireless network.
  I have a netgear router which works fine.

  Can someone please tell me what might cause the wireless create this problem and how to fix?

  Thank you very much
  Alex

  Strange you noticed this in battery mode and mode of AC adapter as well?
  Maybe a few Wlan signal interference can cause this

• HP Power Assistant causing audio/video Stutter - laptop Elitebook 8560p, Windows 7 x 64

  Hello

  I recently noticed periodic audio and video on my new laptop I wanted me to rid of stuttering. I did not notice the stuttering when I bought the computer a few months ago, and if my memories are good it seemed initially after some recent automatic HP updated a few weeks ago.

  The stuttering happens about every 30 seconds and occurs for any playback video or audio source (cd, youtube, itunes, etc.), with only about 5% CPU and about 30% of physical memory use average. I followed the stuttering to coincide with a small wave 3-4% CPU of a WmiPrvSE.exe process. This process runs and the rise of the CPU occurs regardless of program initiation or reading after start-up, I just noticed cause stuttering during playback audio and video. After further investigation, when I kill the HP Power Assistant, the CPU and stop stuttering video, although the same WmiPrvSE.exe process remains (since I assume it's used by a lot of things?). I stopped the HP Power Start Wizard at startup (using msconfig), which solved the problem without having to stop every time I turn on the computer myself.

  Now, I'm content to let this be my system, but the HP Power Assistant is an interesting tool to track the energy consumption, performance, etc. and I think that it should not cause stuttering audio and video, especially with such a small CPU surge. Also has anyone seen this problem? Is this a problem with the HP Power Assistant or could there be something more vast I only put a patch on?

  Thanks for any input.

  System:

  HP Elitebook 8560p, 8 GB of RAM

  Windows 7, 64-bit, Service Pack 1

  Hello

  My understanding of this situation is that the solution is to install an earlier version of the wizard of power.

  See this post below. Ignore my solution because it was not the solution to the problem of eveyone. Read on to the bottom of page 1.

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/sound-issue-ProBook-4530s-partial-solution-need-the-rest/m-p/960383#M16505

  Paul

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Gurgling noise in Audio/video playback

  Hi, I hope someone can help any detailed instructions would be great.

  When playing audio/video, an intermittent gurgling noise (freezes too) occurs if playing stored or streaming media (audio and video) for example iTunes, YouTube, windows media player, etc..

  All solutions please share! Have already updated drivers. Contacted customer service, basically, they did the same drivers uninstalled then reinstalled does not.

  Note After searching questions, which seems to be a problem for other people too, not only of Sony. If it helps, even if the laptop is model SVT13134CXS VAIO T series 13 Touch Ultrabook.

  Thanks in advance for any ideas.

  P.S. Here's an example of how it sounds, in my opinion, it starts at about 01:30
  http://m.YouTube.com/watch?v=CF9Pvdsz0UM

  To further isolate the issue, you can run the Checkdisk utility under windows.  You can also launch the VAIO Care and use the tools in this application.  There are some hardware diagnostics, as well as the VAIO Care convenience store and one-click-care.  These tools can scan your PC and try to solve the problems.  Give it a try and see if that will make a difference.

  If my post answered your question, please mark it as "accept as a Solution.

• Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  Hi Christafarian,

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

  You wouldn't be the first. I'm sorry.

  The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

  I found:

  • If you pull the iPhone in a well-lit environment, it records at a constant speed.
  • In lighting challenged environments, you get images image variable rate.

  I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

  Uses 3rd party freeware really the only solution for this problem?

  With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

  Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

  Thank you
  Kevin

• Audio-video time real (RTAV) 4.6 view

  Hello

  I'm experimenting with running Lync 2010 according to VDI (XP / Win7). For this I need a way to connect devices to the end-user (webcam, microphone and headphones) for desktop view. Since it is a green field situation I have the choice of getting audio / video that is suitable for this purpose (USB, analog, Bluetooth wireless, or any combination of that). End users have a combination of Windows with View client installed boxes, the boxes of Windows RE-configured as thin clients (kinda the same) and of course zero clients (Wyse P20) to complicate things. All the these must be able to transfer audio / video of the end-user in Lync 2010, if all goes well with correct performance.

  What caught my interest the other day is RTAV - I fell on it all by looking for ways to make the above and immediately confused with requirements. See here:

  http://blogs.VMware.com/EUC/2013/07/3370.html

  They say I need client-side user view Horizon (easy, downloaded later and he connects very well to our 4.6 view servers), State but I need "Horizon view 5.2 (or later version) view Agent" inside the guest VM:

  
  

  More on your guest virtual machine, you need an Agent horizon view 5.2 (or higher) to view, along with the Horizon of VMware View 5.2 Feature Pack 2

  
  

  How are we going to find 5.2 agent view invited inside VM on a 4.6 view server install? Can it be done at all? I was able to install 5.3 view Agent in one of the test of Windows 7 discovered desktop computers, but after he successfully installed the console administrator 4.6 display shows it as "Agent unreachable". I rebooted time invited VM and Horizon of VMware View Agent service, no change.

  We use ESXi 4.1 build 1050704, discover 4.6 366101 with the composer, are a few pools and an upgrade to 5.x view would require a lot of things to upgrade. If we cannot get RTAV work with 4.6 view going to abandon this until we can improve our entire infrastructure.

  Thank you

  
  

  
  

  Hello

  If you run a server connection see 5.2 environment ie 5.2. If it comes to greenfield, suggest then you pick up the latest version 5.3, and it needs to connect to the Server 5.3. It will then detect the 5.2 (or agents of 5.3). On the agents, you install the feature pack. You will not be able to install a broker in an environment of 4.6 5.2 4.6 connection server don't "understand" agents of 5.2. For support - for a 5.2 RTAV environment, you must install the Feature Pack 2 and an environment 5.3 to the FP1.

  Notes; If it is a greenfield site - is it possible to use Lync2013? If Yes, then view has integration with Lync 2013, which means that you can enjoy all the benefits of Lync (i.e. audio and video goes direct to the recipient, rather than having to pass through the virtual machine in the data center) which reduces hair pinning effect.

  See Microsoft Lync support for 2013 with VMware View desktops | Blog from VMware Computing end-user - Articles VMware

  and

  http://www.VMware.com/files/PDF/Techpaper/VMware-horizon-view-Microsoft-Lync-install-configure.PDF

  see you soon

  peterB

• the audio/video file size

  Dear all,

  I've never worked with before DPS and wonder if there is a maximum size (MB) or the time limit (minutes) imposed on the audio or video files that are included in a publication of DPS.  Is it possible to add a file audio in a publication of DPS who could be listened to like a book audio or is the content of the application itself is too small to contain such a large audio file?  The same question relates to the addition of a video file.  In other words, file size limits are imposed on the DPS apps?  Thank you.  It is difficult to get a lot of specific information on the DPS Web site.  Thank you. 

  There is no explicit, however video file size limit (in particular) and audio files are the only cause of Folio large files. Rather than include directly the video/audio to the folio, you're better off streaming it.

  Note that the use of DPS to reproduce an audio book won't really work although you disseminate or integrate the audio.

  Neil

• Just installed cs5.5, audio & video effects are missing...

  Just installed cs5.5, audio & video effects are missing... What to do?

  Thank you all

  Need not do anything. One of the major improvements in CS5.5, although perhaps not as well known to the public, is that the audio effects are now 'intelligent' and are unified in their mono, stereo and 5.1 counterparts. Which means that if you need, say, Reverb for a stereo clip, you just drop the effect of reverberation on it without having to find the stereo > reverb effect. They have the same effects, just much easier to apply. Check out blog post of Todd here: unified audio effects in Adobe Premiere Pro CS5.5 "Premiere Pro workspace .

  This said, you have problems with video effects?