Fuze MSC mode strange question

Similar Questions

• Using (Playlists) SD Card in MSC Mode

  Hello;

  In MSC Mode, Clip + and another removable drive to the SD card, as separate drives.  So if I were on a SD card, how would create playlists (m3u) which contain music of these two drives?  When connected to a computer, it is available drive letters; When it is not the case, however, there is no drive letters.  Therefore, I don't see how it can be "seemless" as someone mentioned.  I would use the MTP Mode, but I prefer not to as it is not flexible.

  Any thoughts?

  In fact, you have a few questions here that need some explanation:

  1. Playlists m3u will be read & play songs of either of the reader memory internal or card SD, but not both. PLA format playlists is going play songs from two sources of memory. Personally, I use Winamp and MSC mode to create playlists .m3u. Then, I use a conversion program to convert the .m3u playlist a .pla one. This works. There are other means. I tell you, just the way that works for me.
  2. Reading 'Transparent', as has been mentioned here refers to the Clip + (or any player with a slot for SD card Sansa) and the fact that the player creates a database containing the songs of two memory locations using the information in the ID3 tags embedded in the files of the song and when 'Play All' (with or without the shuffle) is selected , will play files regardless of the location of the memory. Playlists are a different story (as explained in #1). The only difference is that if you use the folder view (in the menu music).
  3. MSC mode will allow your computer to see your player that separate the 2 discs, the internal memory and the card slot (if a card is inserted in time or not). Your computer sees your device in MTP mode as a single device requiring 'management' and does not assign a drive letter. You can still access two internal & external memories, but it is a "virtual". Also note that your computer can only see the songs in 1 mode at a time, so it is best to figure out which is best for you depending on how you plan to use the drive and all that transfer you the content in this mode 1.

  I am with you and a guy MSC through & through. PSG has its purposes (content DRM such as Rhapsody, etc.) and the fans, but MSC you gives the user much more control and is easier all around.

• Playlists and MSC mode

  I know there has been much discussion already MSC vs MTP, but I still have to ask a question.

  I've heard about how you can create playlists by drag-and - drop, in MSC mode... but what this means and can I do it?

  My playlists keep coming... really annoying voids, so any help is appreciated!

  The only MSC, drag and drop solution I use Winamp.  Drag the files to the "rocket" in the Winamp playlist editor, organized as you like, then save the playlist directly on the record of MUSIC of the rocket.

• Sansa won't work in MSC mode at all

  My sansa worked perfectly before, it was rockboxed and loaded with music. Then one day I turned it on and it froze in the system menus of rockbox. I turned the sansa on and outside and he consistantly froze at the same point. I thought it was a problem of rockbox, so I used sansa patcher to uninstall bootloader. Who took care of my freezing problem but now using the original firmware it only sees half of my songs and I don't have a micro sd chip in there. The other problem is that when I put the sansa MSC mode and plug it into the brief of screen sansa bed connected, but then once I try to explore the sansa in windows Explorer, that it goes offline and the computer crashes until I unplug the sansa. I isolated it as a flaw in the sansa by trying on each usb port on three computers different and three different versions of windows (Vista Premium, Windows XP Pro, Vista Home Premium 64-bit). I tried to plug it on and off. Is there a way to fix this? Replace the recovery mode firmware help? The device of formatting would have an effect? MTP mode still works well but I would like to get rockbox works again and I doubt that I can solve the problem of database of it not finding my songs without MSC.

  I appreciate all help.

  It's quite strange. MSC is usually easy to use mode and PSG is the problem. I suspect that there is a bad file that was transferred to MSC mode (or while using Rockbox) and he's in trouble. But you can't really fix that one file without returning MSC. I also assume that you use Rockbox to read files as file names and that these files do not have the Sansa like ID3 tags. But any. It is now a mess.

  Formatting will delete all the files that you have added to the unit, so let's hope you have backups.

  First, try to update or replace the firmware in recovery mode. See if that stabilizes the connection of MSC. You can then run ChkDsk for a chance at a file of fixing problem.

  If not, get in shape via the recovery mode. Make an empty folder called sansa.fmt and drag it into 16 MB - FORMAT. Do not use explore to the Format 16 MB FORMAT - that would make things much, much worse.

• Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

  Hello

  I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
  I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

  I am aware of
  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
  The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

  I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
  Clearing keys does not work too.

  I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
  What can I do?

  Edit: will put some pictures of the uefi

  You posted the screenshots of the configuration of Toshiba utility.
  The boot mode must be changed in the BIOS settings.

  To access the BIOS of the laptop must be turned off.
  Then put the unit BUTTON and press F2 to enter the BIOS.

  In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

• If the hard disk dies this affect router/WiFi?  I know that this seems to be a strange question.

  If the internal hard drive dies this affect router/WiFi?  I know that this seems to be a strange question.  Logically, they seems to be two independent functions.  However, since I do not understand how it works...

  I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.

  Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?

  If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.

• Sansa e260 MSC mode does not show my files

  I never have problems with my player sansa until today. I just updated the firmware and now MSC mode does not work correctly. None of my files on the Sansa e260 player appear, do just the default values. However, everything is there when I go through my sansa player, but he does not appear in the player. No clue as to how I can solve this problem, so that the files that I have in my sansa player appear in the disc again? Any help is appreciated, thanks!

  The music on the e200 series folder is "hidden". Maybe that is. Change the settings in Windows to "show the hidden files and folders" and see if that helps.

• 1 gigabyte of invisible music in MSC mode

  Hi guys. I see my Sansaclip as a storage device usb with the root of my memory of 2 GB internal/computer/Sansa clip files on the internal memory are: Albums, audio books, music, playlists, podcasts, recording, service - as well as a file devicon. I put music on the Sansa when buying a months ago, and it's been great. Now, I tried to find these albums, that the excellent work on the Sansaclip, remove some of them, but this is not possible. The mentioned files are all empty, except for the music folder with 4 testsongs files delivered with the Clip. However, the internal memory is full, and I have obviously checked 'show hidden files/folders', so is not the problem. Where the Sansa Clip hid all the music, and what I can do to be able to see him again? The problem would be that I loaded the music of win2k and I now use winxp? It seems absurd, because it is simple mp3 files, but given this player cache by far just 1 GB, everything is possible. Appreciate your help.

  See my response here: free space decreases slowly.

  It seems that your machine Win2K wrote files in MSC mode, while the XP computer uses of the PSG.

• I get an error message when I force MSC mode.

  Whenever I'm forcing MSC mode, I get an error message stating the following:

  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  What this means >

  you have win XP service pack 3? a google search shows many people with SP3 which have the same problem. Some had to roll back to SP2 to resolve.

• Instructions on how to change a Sansa Express mode MTP to MSC mode

  Here's a PDF detailed instructions with screenshots on how to change a Sansa Express mode MTP to MSC mode.

  Instructions for the mode MTP Sansa Express in MSC mode

  Yet once again, if you feel compelled to start a pointless discussion on a distiction without difference, pull yourself.

  L'Express is a device MTP, the method ONLY works to 'convert' MSC are in the instructions.

  The instructions actually work, which was the point of being with.

  That's what these forums are for.

  But you're too busy from a contest of wee in fact pointed out that the highlight.

  What was the point of your original response message once again?

  Oh yes, it's true.

  It served no useful purpose at all and is used to tell us all that water is wet and rocks are difficult.

  Feel free to come back to the breeding of cats now.

• 280th can not acess to files in MSC mode freezes

  I the280e plugin and go to my computer. The 280th says that it is connected. If the280e is present at all in my computer and I click on the

  drive letter it freezes. Tried holding down the REC button while plug in there and nothing happens. Uninstalled in Device Manager

  Stop computer and rebooted. Reinstalled and that did not help. The 280th will play all files I put on before all the trouble started.

  All files have been updated with this topic in MSC mode. Can anyone help or I'm just outta luck?

  Never mind!!! I thought about it myself. And sorry, it's a 280e step an e280... My bad

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• Strange question - width ListItem

  While developing applications, I noticed a strange question.

  When I draw list in qml item available, it's very nice on an excerpt:

  I put

  horizontalAlignment: HorizontalAlignment.Fill
  

  and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?

  Does anyone know how to set the width of the listItem to fill all the space from left to right?

  To sum up,

  I want to have (and it looks like this on qml overview):

  

  but I get this (width of list point fits only the content):

  

  Thanks in advance.

  Hi, there may be simpler but for me it works using the spaceQuota:

  ListItemComponent {
      type: "item"
      Container {
  
          background: Color.Red
          Container {
              preferredHeight: 230     
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
              }
  
              Container {
  
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1
                  }
               }
           }
       }
  }
  

• Strange question - data double on table 12 c JDev

  Hello

  I have a strange question in my table. I use Oracle JDeveloper 12 c. In my page, I use 2 VO and a secondary has a problem with the display of data - it displays two times. Heard that I deleted the table and put it in my page and always the same problem.

  No matter if I have all the data to my record in the table primary or not, when there are data to display then it shows twice. I do not know it can help, but for more information table is located in the popup.

  Anyone have this problem?

  Kind regards

  WK

  You must specify exact jdev version (there are two versions of 12 c)

  I had this problem in 12.1.2(a il y a longtemps, et à cause de trop de bugs dans cette version je n'a pas pris la peine de trouver la raison), but it seems that this problem went to 12.1.3(at moins, pour mon application)

  Dario

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?