FW 7.0.2 strange traffic after upgrade

Similar Questions

• Strange problem after upgrade OR-Scope

  I noticed a strange problem with niScope Multi Fetch WTD.vi who broke my code that worked for years until that I upgraded to OR-Scope 3.9.6.

  In special circumstances, usually when there is more than 4 channels configured, this VI returns fewer points than asked, finishing ever acquisition. And this happens only when its entry 'channels' is wired! Weird how?

  I enclose you a snippet of my code that show this oddity.

  The jury was PCI-5105, LV 2010 32-bit sp1 version.

  
  

• Strange question after upgrading RAM on Tecra M10

  Greetings gurus,

  Pleeeaase help...

  I recently upgraded my M10-PTMB1E to 8 GB of RAM of 2 GB.

  My bios sees 8GB, Windows tells me I have 8 GB installed but 3.8 GB usable, it checked with a boot CD. Then, I pulled one of the external 4 GB chips and replace the 2 GB in. Windows detects the 6 GB.

  I tested the RAM with memtest and these two circuits passed (although memtest is only 4 GB)

  I thought it would be a case of updating the BIOS, but if I run the .exe files in 20091103164158-bios, bios-20091104152403 or the bios-20091104172541, I get an error saying "this computer is is not supported.

  Could someone please tell me: -.
  (1) this machine does really take 8 GB
  (2) if so, what changes should I do so that he can use all the 8 GB (unless of course the VGA)
  (3) what the BIOS update do I need

  Thank you for your help

  Hello

  I n t have this model of laptop, but I'll try to help.

  # Yes, this laptop model supports up to 8 GB of RAM
  # Perhaps this document will help you http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
  # In general you don't need to be. Just if you want to you can update the BIOS, but the old one should be OK. Just make sure that you are using compatible RAM modules.

• Qosmio F30 - strange question after upgrading RAM

  Hello

  any one can help me? Since I ve changed my RAM from 1 GB to 4 GB (HDD2-667) Samsung 2 GB X 2.
  I have reformat twice because of the problem but still my computer when I open it, flashing browser. What I am going to run smoothly again my computer? I already ran the memtest after I fixed the new message of RAM are ok no error found.
  Why it flashes (my computer is Qosmio F30 - 112)? I need your help please

  Thank you
  rtmasagca

  What do you mean by 'sighted Navigator '?

  The laptop works ok when you have only 1 GB installed?

  Maybe the RAM is not inserted correctly?

• Spectrum 13D-3000CTO: a strange behaviour after upgrade windows 10

  Hi all, I wonder if anyone has had the question I had, and if so if you solved it, how is it resolved?

  I have improved my 13D to windows 10 when it was available to me, then I noticed that my windows, left alt key and the caps lock light no longer work, however the other keys and lights work. Yes, they worked in windows 8.1, but who wants to go back?

  Hello

  You did do a restore of the BIOS, and then test the lights before you did update the BIOS? You did answer this question previously. The system must have a BIOS restore done before additional troubleshooting. The restoration itself without updating was the resolution for many.

  As a last resort, please use the following link to create yourself a file number:
  
  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  Please re-post with the results of the resolution of the problems. Please let me know if I answered your question by clicking on the 'Thumbs up'. If the troubleshooting takes place this post solved that problem for you please use the button "Accept as Solution" .

  Thank you!

• ASA uses that certificates self-signed after upgrade to 9.4.1

  I came across a strange issue after upgrade to 9.4.1... (from 9.3)

  However I access the ASA (browser, Anyconnect, etc.), it offers only a self-signed certificate even if an appropriate SSL certificate installed.

  I checked:

  SSL-trust VPN_Portal_TP point
  SSL-trust outside VPN_Portal_TP point
  SSL certificate authentication CAF-timeout 5
  interface outside port 443 SSL certificate authentication

  is configured.

  • CA is installed, too.
  • Reinstalled all certififcates.
  • Reassign the Trustpoints

  Any ideas would be greatly appreciated... Thank you!

  I did have time to test this out on my laboratory unit yet, but there's a thread related here.

  I'm not positive on the standard resolution immediately - it will bring close watch.

  Perhaps the first person to prosecute TAC may share the resolution.

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• Satellite A660 - 10 X - no boot after upgrading RAM 8 GB, but 4 GB + 2 GB only

  Hello

  Today I bought two sticks of Kingston 4 GB DDR3 1066 MHz CL7 and I'm trying to replace my 2 GB ones, but something is wrong.

  If I put two sticks of 4 GB laptop does not start. I have the latest version of the BIOS (1.80). I have restored the default settings after upgrade.

  But it's quite strange, because if I put a strip of 4 GB and a 2 GB stick system starts and everything is fine (with memtest86 + too). But there is still one thing: 4 GB stick should be rolled in the dock before, above second, 2 GB module. If I reverse cell phone memory will not start again.

  Is - everyone knows how to solve my problem? Is this a BIOS problem? BIOS version which A660 takes in charge the amount of 8 GB of RAM with no problems? I can downgrade from the BIOS, because I don't know if Toshiba help update.

  Thanks in advance.

  Is this exact module the same 4 GB RAM listed on THIS page?

• After upgrade on APEX 5.0 and ADR Workspace Images do not appear

  Hello

  after upgrade the APEX 4 APEX 5.0.2 and the use of ADR now instead of OHS everything works fine, but the logo is not displayed. It is saved as a static file from the workspace (#WORKSPACE_IMAGES #LpWaV_Logo.gif).

  Here, the entry in the Tomcat access log:

  10.112.145.119--[14/Jan/2016:16:58:07 + 0100] "GET /ords/lpwa/r/files/static/v19Y/LpWaV_Logo.gif HTTP/1.1" 404 11384

  In the APEX 5.0, I did the configuration of RESTful Services with apex_rest_config.sql. Subsequently, I installed 3.0.3 as desrcibed ADR ADR docu e56293.pdf Chapter 1.3.4.2.

  Anyone have an idea what is wrong?

  Thanks in advance.

  Kind regards

  Martin

  Hi Martin

  Please see:

  CAVEAT. DO NOT USE ADR 3.0.3 with APEX. There must be a Bug in 3.0.3.351.13.24 concerning the static files of Apex.

  ... and in the meantime there are more threads on this topic

  Oviously person eigther Apex, or the ADR teams seems to feel free to say anything on this. I find it very strange...

  Concerning

  André

• ESXi hosts disconnected/no response in Vcenter after upgrade (4.1 = > 5.5)

  Hello. I'm upgrading our current infra (hosts/Essential licensing Vcenter / 3 ESXi 4.1).  vCenter Server has been upgraded OK, so I started to esxi upgrade hosts one by one.

  Upgrade process is OK, but after the reboot, upgrade marked as "not responding" in vsphere client server. I could ping this host and connect via ssh.

  When you try to reconnect the client host, got a strange error "this edition of vCenter only supports 3 host (s) in the inventory. After 3-4 hours of nothing to host

  has begun to show ok. After upgrading a second host, the same situation. I don't understand, how to solve it without waiting for another 4 hours.

  Restart of host management agents does not help.

  I remember I have a similar situation in the past where the number of licenses does not update as expected, i.e. required some time. What helped was to restart the server vCenter Server in my case. Maybe worth a try!

  André

• Microsoft NLB blocking after upgrade ESX 5.0

  Hi all, I'm new to vmware

  We improve all our ESX 4.1 to 5.0 in February, after that, a lot of multicast NLB Microsoft hangs before upgrade, we used about 2 years with no problems.

  After upgrade, we have 3 fixed NLB or conflict for 3 months.

  Any idea? in the VMware.log prompt, I don't see anything specific related to the networks of the time incident.

  Thank you very much

  Open the VMware folder and confirm this problem for the network card Broadcom is known

  VMware KB: 5719/5720 Broadcom network adapters using driver tg3 become unresponsive and stop traffic vSphere

• Impossible to deploy the model after upgrading to vCenter v4_1

  Hi all

  I updated vCenter Server from version 4.0 to v4.1 and re-registers the hosts.
  Virtual machines are working well and are able to collect data on performance.

  However, when I tried to deploy the model, error occurred and failed to deploy the model.

  (This model were made to vCenter v4.0 environment, before moving on to vCenter v4.1).

  My client needs deploy the model so that it can create a new server next week...

  I looked to the top of the Knowledge Base and found the following information.

  ----------------------------------------------------

  Knockout No. 1036224
  VMware KB after upgrading to vCenter Server 4_0 to 4_1, deployment of a model with a comments customization fails

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1036224 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 321118019 & StateID = 1 0 321114529

  ----------------------------------------------------

  If there is anyone who has solved this problem by following the procedures written in this KB, could you tell me at what level you updated VMware tools for?
  In addition, was the update of the virtual hardware to solve this problem?
  (I hope that the material of the VM is v7, which is the last for ESXv.4.0, update the virtual hardware is not required in my environment :)

  Thanks for you information in advance!

  
  < environment >
  Before the upgrade: vCenter Server * v4.0*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware,.
  After upgrade: vCenter Server * v4.1*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware
  (I've specifically updated only the vCenter server and ESX and VM(Windows/Linux) are not updated).

  Hello

  Try to convert the template to a virtual machine, then new - VM model.

  Sounds strange, but it works for us

• Lost access to the volume after upgrade 4.1

  Setup

  1 x HP c7000 blade box

  3 x HP BL460cG6 with dual Xeons 5540 and 48Gb of RAM, cards ISCSI HBA, QLogic

  3 x HP P4300 Lefthands

  4 x 3020 Cisco switches for blade in the back the c7000, 2 x dedicated to iSCSI traffic

  vSphere 4.1 Server

  The problem

  We went through the entire process of upgrading our server for vSphere 4.0 to 4.1 to manage a stand-alone ESXi 4.1 system, so our attentions turn to our 3 blades running ESXi 4.0u1 we used the built in Update Manager, downloaded the 4.0 to 4.1 upgrade file and we have improved our first blade and it did not notice problems as there put servers have was little used those.  We then upgraded the second and moved our main mail on her server.

  It was when we did that we started getting errors when people were losing connection to the exchange server, after some research we've seen of the event and we have been to see the error:

  "Lost access to the volume because of connectivity issues."  Recovery attempt is underway and the results will be available shortly"

  Then 10 seconds later we get the message:

  "Successfully restored access to the volume due to connectivity problems."

  This error only occurs on the blades of 4.1, we have restored a blade on 4.0 and errors are not displayed and no errors were reported with the servers on this blade.  As far as we can say it is not a network problem since all blades for iSCSI traffic flows on the same switches to the Lefthands, and we were losing the connection to volumes on the two Lefthands.

  We have a call connected with HP about this, but from the Yes, we cannot determine what is causing this problem and how to solve.

  So any help is greatly appricated

  Thank you

  Dave

  This is due to a combination of ESX(I) 4.1, QLogic and version Lefhand SAN/IQ 8.5 with the 10092-00 patch version. I did a blogpost on his problem:

  http://yuridejager.wordpress.com/2011/02/07/lost-access-to-volume-error-with-hp-lefthand-san-storage-after-upgrading-to-vmware-vsphere-41/. I hope this helps.

• ORA-01031 after upgrade of 10gr 2-11 GR 2 on the application tables

  I have a strange problem after I upgraded from 10.2.0.4 to 11.2.0.2. I have now two databases: TEST10g and TEST11g
  
  I have a user on my TEST10g database (10g) and my TEST11g database (11g). We'll call it OPS$ BRAND. It is the same between the two databases. This user has no roles with rights and the following system privileges:
  
  Select * from dba_sys_privs where dealer = ' OPS$ MARK "order of privilege;
  
  MODIFY AN INDEX
  MODIFY A MATERIALIZED VIEW
  ALTER SESSION STATEMENT
  ANALYZE A
  CREATE AN INDEX
  CREATE A MATERIALIZED VIEW
  CREATE PUBLIC SYNONYM
  CREATE SESSION
  CREATE SYNONYM
  REMOVE ANY INDEX
  REMOVE ANY MATERIALIZED VIEW
  REMOVE ANY SYNONYM
  RUN A PROCEDURE
  UNLIMITED TABLESPACE
  
  It has the same privileges of object in the two databases.
  
  The user of our application, APP001, has a number of packages and tables. In the database TEST10g, PAHO$ BRAND is able to SELECT a tbl_awesome:
  
  SELECT * FROM APP001.tbl_awesome;
  < many lines >
  
  However, when I run this from TEST11g (again, the privileges of the user are all the same), I get the following:
  
  SELECT * FROM APP001.tbl_awesome;
  ERROR on line 1:
  ORA-01031: insufficient privileges
  
  End user claims this is part of an anonymous block. However, I do not think that it is just that I do not understand how the OPS$ BRAND is able to access the TEST10g dashboard. As far as I understand, the only explanation is that we use the appellant's rights by calling a package held by APP001 and obtaining these rights, etc, etc. When you run the package as long as the user to MARK OPS$.
  
  I see something similar with the end user through forms. Looks like they are trying to access a table in the APP001 schema and access a set belonged to APP001. They receive the error ORA-01031 too.
  
  I have an another OPS$ user called OPS$ MIKE. This can read the table:
  
  SELECT * FROM APP001.tbl_awesome;
  < many lines >
  
  It's because he has the role of DEVELOPER who can SELECT ANY TABLE.
  
  The rights of the applicant/define have changed in 11 GR 2? I must be missing something obvious...

  Really make sure user is not having password roles: these kind of roles when activated by default up to 10.2.0.4. From 10.2.0.5 these roles are not enabled by default.

• .PS generate a blank PDF file after upgrading from Acrobat Pro 7 to 9 of the file

  Hi all

  I searched for it in vain, so I come to you now in desperation. My boss asked me track down this error and I have to be honest, I'm a little green with Acrobat Pro. So come the situation I know. My Department, usually use a .ps file to generate a publication as a PDF of the other .ps files. We operate on a network share (drive P :) on Windows XP SP3 machines with the latest updates.

  In Acrobat Pro 7 we can double-click the .ps file that executed the code through Adobe Distiller and a finished PFD at the same file below name would exit in the host directory. But now, after upgrading to Adobe Acrobat 9, this process produces a PDF file with all bookmarks appropriate and no content.

  %!
  % Program postScript for distilling and combine multiple PostScript files.
  % During the incorporation of subsets of fonts, it is strongly recommended that you use this technique
  % to distill several subset of police for one of the PS file is used for each policy.

  /prun {/mysave save def % performs a backup before running the PS file}
  DUP = RAS % watch running PS file name
  RunFile built in distilling procedure calls %
  Claire cleardictstack % cleans up after PS file
  mysave restore % restorations save level
  } def
  [/Author (user)
  / CreationDate)
  / Creator)
  / Title (title)
  / Topic (Subject)
  / Keywords (words)
  / DOCINFO Pdfmark
  [/PageMode
  / UseOutlines
  / DOCVIEW pdfmark
  [/ Page 1]
  / View [/ XYZ null null null]
  / Title (cover Page)
  / OUT pdfmark
  [/ Page 2]
  / View [/ XYZ null null null]
  / Title (Page 1)
  / OUT pdfmark
  [/ Page 3]
  / View [/ XYZ null null null]
  / Title (Page 2)
  / OUT pdfmark
  [/ Page 4]
  / View [/ XYZ null null null]
  / Title (Page 3)
  / OUT pdfmark
  [/ Page 5]
  / View [/ XYZ null null null]
  / Title (Page 4)
  / OUT pdfmark
  [/ Page 6]
  / View [/ XYZ null null null]
  / Title (Page 5)
  / OUT pdfmark
  [/ Page 7]
  / View [/ XYZ null null null]
  / Title (Page 6)
  / OUT pdfmark
  [/ Page 8]
  / View [/ XYZ null null null]
  / Title (Page 7)
  / OUT pdfmark
  [/ Page 9]
  / View [/ XYZ null null null]
  / Title (Page 8)
  / OUT pdfmark
  [/ Page 10]
  / View [/ XYZ null null null]
  / Title (Page 9)
  / OUT pdfmark
  [/ Page 11]
  / View [/ XYZ null null null]
  / Title (Page 10)
  / OUT pdfmark
  [/ Page 12]
  / View [/ XYZ null null null]
  / Title (Page 11)
  / OUT pdfmark
  [/ Page 13]
  / View [/ XYZ null null null]
  / Title (Page 12)
  / OUT pdfmark
  [/ Page 14]
  / View [/ XYZ null null null]
  / Title (Page 13)
  / OUT pdfmark
  [/ Page 15]
  / View [/ XYZ null null null]
  / Title (Page 14)
  / OUT pdfmark
  [/ Page 16]
  / View [/ XYZ null null null]
  / Title (Page 15)
  / OUT pdfmark
  [/ Page 17]
  / View [/ XYZ null null null]
  / Title (Page 16)
  / OUT pdfmark
  [/ Page 18]
  / View [/ XYZ null null null]
  / Title (Page 17)
  / OUT pdfmark
  [/ Page 19]
  / View [/ XYZ null null null]
  / Title (Page 18)
  / OUT pdfmark
  [20/page
  / View [/ XYZ null null null]
  / Title (Page 19)
  / OUT pdfmark
  [/ Page 21]
  / View [/ XYZ null null null]
  / Title (Page 20)
  / OUT pdfmark
  [/ Page 22]
  / View [/ XYZ null null null]
  / Title (Page 21)
  / OUT pdfmark
  [/ Page 23]
  / View [/ XYZ null null null]
  / Title (Page 22)
  / OUT pdfmark

  prun (p:/ps/pdf/cover.ps)
  prun (p:/ps/page2.ps)
  prun (p:/ps/page3.ps)
  prun (p:/ps/page4.ps)
  prun (p:/ps/page5.ps)
  prun (p:/ps/page6.ps)
  prun (p:/ps/page7.ps)
  prun (p:/ps/page8.ps)
  prun (p:/ps/page9.ps)
  prun (p:/ps/page10.ps)
  prun (p:/ps/page11.ps)
  prun (p:/ps/page12.ps)
  prun (p:/ps/page13.ps)
  prun (p:/ps/page14.ps)
  prun (p:/ps/page15.ps)
  prun (p:/ps/page16.ps)
  prun (p:/ps/page17.ps)
  prun (p:/ps/page18.ps)
  prun (p:/ps/page19.ps)
  prun (p:/ps/page20.ps)
  prun (p:/ps/page21.ps)
  prun (p:/ps/page22.ps)
  prun (p:/ps/page23.ps)

  
  % INSTRUCTIONS
  %
  % 1. Find all PostScript files in distiller.
  %
  % 2. Make a copy of this file and give it the name you want to have as a prefix
  % for the rΘsultat file. For example, you can name this file MyBook.ps.
  %
  % 3. Include a line for each PostScript file to run by using the syntax of path
  % appropriate for the Acrobat Distiller platform running.
  %
  % Macintosh path syntax: prun (Macintosh HD:Folder:File.ps)
  % Windows path syntax: prun (c:/mydir/file.ps)
  % UNIX pathname syntax: (. / mydir/File.ps) prun
  %
  % Note: the syntax for Windows may seem strange, but the double escapement of the
  % backslash is required to use filenameforall.
  %
  % 4. Distill the file on the computer running Acrobat Distiller.

  Once the process is 'done' the following log file is generated.

  Acrobat Distiller 9.4
  Start: Monday, October 18, 2010 at 13:32:05

  Adobe PostScript software version: 3018.101

  Start time: Monday, October 18, 2010 at 13:32:06
  Source: publicationtest.ps
  Destination: C:\Documents and Settings\User\Desktop\usfdtest.pdf
  Adobe PDF settings: C:\Documents and Settings\User\Application Data\Adobe\Adobe PDF\Settings\High quality Print.joboptions
  c:/ps_script/cover.PS
  c:/ps_script/TOC.PS
  c:/ps_script/page3.PS
  c:/ps_script/page4.PS
  c:/ps_script/page5.PS
  c:/ps_script/page6.PS
  c:/ps_script/page7.PS
  c:/ps_script/page8.PS
  c:/ps_script/Page9.PS
  c:/ps_script/Page10.PS
  c:/ps_script/page11.PS
  c:/ps_script/page12.PS
  c:/ps_script/page13.PS
  c:/ps_script/page14.PS
  c:/ps_script/page15.PS
  c:/ps_script/page16.PS
  c:/ps_script/page17.PS
  c:/ps_script/page18.PS
  c:/ps_script/page19.PS
  c:/ps_script/page20.PS
  c:/ps_script/page21.PS
  c:/ps_script/page22.PS
  c:/ps_script/page23.PS
  Distill time: 00 hour (s): 00 minute (s): 00.390 second (s)
  End of job *.

  Is there something obvious that shouts, "you're a fool!"? I agree with that, simply to repair.

  I thank in advance for any help you can provide.

  Michael

  Run the Acrobat Distiller with the /F. command-line option