FW PIX configuration using PKI on Microsoft Server CA

Similar Questions

• Used to install Microsoft SQL Server 2005 Express Edition Service Pack 3

  I tried to install this service pack for the last 2 weeks now, but it will not be installed. As part of the update, it keeps even after 3 hours and did not finish.
  The icon just guard cycling.
  When I open / FEATURES of the PROGRAM the following programs are installed.
  Microsoft Server 2005
  2005 server compact ed (enu)
  native client server
  file server installation media
  SQL server vss writer
  I have edition windows Home premium 32-bit installed.
  My system is custom built with 2 GB ram 500 GB HDD Intel core 2 quad CPU Q6600 @2.4 GHz 2.39 GHz and gt 8600 graphics card nividia.
  I did have trouble to install other updates until now.
  Please please help as someone who is completely self-taught, and proud of it I find this very frustrating problem

  Hello Apache65,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to SQL Server 2005 and would be better suited in the SQL Server community. Please visit the link below to find a community that will provide the support you want.

  http://support.Microsoft.com/ph/2855 SQL server 2005 support Site

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use license 2008 Windows Server 2008 R2?

  I have Windows Server 2008 Standard license, can I use it in Windows Server 2008 R2 Standard Edition?

  and it's my Windows 2008 CAL would be valid if using windows server 2008 R2?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible?

  Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.

  That you were previously informed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/i-want-to-take-the-backup-of-Active-Directory-in/d7aa33cd-5a4a-40D1-BCAC-70743cd4372d

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Don

• Cannot use RDP with Windows server 2008

  Original title: a user cannot RDP

  Hello

  I have a windows 2008 R2 server with 5 licenses of Terminal Server. I set it up so that users can RDP to the server using RDP and access other machines via VNC, it's not connetced to a domain or whatever it is.
  All users can connect using any OS - Win XP, Win 7, but a user cannot get to their place of work - I can connect from home, of Germany, etc. using the same user name and password, but they can get on the server but their access is denied.
  They can telnet to the IP address but can't.
   

  Hello

  Thanks for posting the question in the Microsoft Community!

   

  You have any question using RDP with Windows server 2008.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

   

  If you need any other assistance, let us know and we would be happy to help you.

• Microsoft Server 2003 Causing me Problems

  OK, I used to use internet connection sharing on my laptop through a router connected to my computer through the modem Ethernet to my computer but now after the update to Microsoft Server 2003 he doesn't share not the internet EACH THING of ANOTHER IS AS IT SHOULD BE AS IP, WAN, DRIVERS, etc.

  Hello

  Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?

  Original title: upgrade of Microsoft XP on an emachines T3830 Dell

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  Hello

  eMachines is owned by Acer, Dell No.

  Here is the information IF you ever want to upgrade a computer to a later version.

  But I can advise you that your eMachine is capable of running Windows 2000 and Windows XP.

  http://www.eMachines.com/EC/en/us/content/drivers.html

  Put your model number in the link above > then search under operating system, provided drivers

  @@@@@@@@@@@@@@@@@@@@@@

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no update free from XP to Vista, 7, 8.1, or 10.

  Forget Vista as support extended for Vista SP2 will end April 2017.

  Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10; extended support ends 14 October 2025:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• System cmos checksum bad - default configuration used.

  Original title;

  HP 9000 - boot errors

  that means the following errors and how to fix: 0271 - check date and time settings and 0251 - checksum cmos bad system - default configuration used.

  Hi Joseph,.

  Since when are you facing this problem?

  The CMOS Checksum Bad error that is displayed depends on the type of BIOS used. One of these error conditions indicate that failure of a test of Basic Input/Output System (BIOS).

  There are two main reasons why fails a test of the BIOS:

  · The battery on the motherboard has lost its ability to provide energy. Date and time system are also affected by a defective battery.

  · The BIOS has been updated "evil." This can happen if the power is lost by updating the BIOS, or update the BIOS with an update that was not downloaded from HP, or when a virus or malware modifies the BIOS data.

  To resolve this error, use one of the following sections provided by HP.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If your PC always shows errors about the clock or CMOS when starting the PC, the CMOS battery on the motherboard probably needs to be replaced.

  Alternatively, you can contact HP for help.

• I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

  I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

  The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

  If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

  Good luck.

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• FastMail contacts access blackBerry 10 using Mac OS x Server

  Hello community,

  I configured my Z10 (OS 10.3.2.2474) to access my contacts FastMail using Mac OS x Server.

  The contacts are downloaded to my phone and I can view, edit, and delete. All changes are synchronized with the FastMail server.

  I only have a problem: new contacts that I create using the Z10 are not uploaded to the server. Stay on the phone, they are not synchronized.

  Could you please help me with this problem?

  Thanks in advance.

  Thank you very much for your answer.

  Unfortunetly it does not solve the problem. But I managed to solve the problem by changing my FastMail account type: before I had a user to a family account and now I have changed to an individual account. After that everything works fine.

• Backup configuration using SCP

  Hello

  I'm stuck with a piece of configuration, trying to save with SCP Cisco switches.

  We need securly backup our infrastructure remote switches, connected to our main site through the firewall (for security reasons).

  The central server is secure, and we cannot use FTP or TFTP. The way we have chosen is SCP.

  To do this we first tried with a login and a password declared on the SCP server (full FTP server, in fact in eval mode).

  Everything works fine, but our security team dislikes the account and the password stored in the switch configuration (we are scheduling backups with local "cron").

  So we tried to configure a pair of RSA keys, connect to the SCP server with RSA key password instead.

  The configuration is OK on the server, the cause, we could open a session with a client of WinSCP.

  But we are unable to connect to the Cisco device. When we try to login and issue "the copy running-config scp:' test, insiders of the connection and the closure of the Terminal."

  Do a debug port SCP console (cause whenever we try, we lose our access to the terminal), we can see that the error: "server does not support password authentication.

  It seems that the rsa key pair is not presented on the server of the CPS, and the switch always try to connect with a password.

  Is there a normal state, because the switch does not use a connection with the RSA key pair, or is there a problem with the configuration that we have entered?

  What do you think?

  Thanks for the help that you could give to us.

  Good bye.

  Yannick

  Looks like authentication based on RSA keys is possible starting with IOS 15.0 (1) M:

  http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_secure_shell_v2.html

  Otherwise, you might have an external script that initiated the SCP from a secure server, assuming that access to the server is locked and read on behalf of username/password access the SCP script use is well controlled.

• UCS Auto-deploiement of the configuration using PXE and double vNIC

  We are trying to set up Auto deploy blades UCS B200 M3.  Our facility has the chassis connected to double 6248 fabric interconnects.  We managed to get this to work when the blades have been identified by the MAC configured on the DHCP (Infoblox) server address.  However, in trying to solve the scenario of the tempting PXE server start using either NIC, thus having two MAC addresses, this scenario could not be supported on the DHCP server (mapping two MAC addresses to a single IP address).  Then we had the idea of using the GUID/UUID of the blade as a unique identifier, as it is the same regardless of the NETWORK card is used.

  We tried to put in place, but were unsuccessful.  Blade sends its ' GUID by using the option DHCP 97, but the DHCP server is only looking for the customer ID via DHCP Option 61.  We have not been able to determine how, otherwise, the blade server can send its ' GUID via DHCP Option 61 and Infoblox tells us that their server may not be configured to accept the Option DHCP 97 as a customer identifier.

  Someone has encountered this situation and it is resolved?  It is certainly not a unique situation, having a server blade with two network adapters.

  Thanks in advance for your answer.

  Ron Buchalski

  That's why you need to select the 'hardware failover flag' in the definition of a vnic. If your vnic is attached to A fabric and a fails, you will automatically turn on to the B-fabric.

• How to prohibit remote access vpn client to use the local DNS server

  Hello

  I'm on ASA5505 remote access vpn configuration.

  Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

  Thank you.

  Kind regards

  The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

  Here's the order reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

  You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.