SBS 2011 BSOD - installation of Hyper V.

Similar Questions

• SBS 2011 OEM installation on a Hyper-V host

  Running SBS 2011 OEM.

  Can we install a HyperV host and install the SBS 2011 on this host as a virtual server?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• SBS 2011 drivers needed

  Pavilion P7-1410 supplied with Windows 8 OS; installation of Small Business Server 2011. Installation fails due to lack of drivers (e.g., network, Ethernet, USB). Download driver HP account Windopws 8 drivers. How can I get the necessary drivers for SBS?

  I saved the Win 8 drivers before reformat the drive, but they do not work for SBS.

  Hello:

  Unfortunately, I don't think that you will find the drivers for this operating system - even from the mfr websites.

  I just checked the Realtek Web site for the drivers for the ethernet controller, and there aren't any.

  They have Windows 2008 server, but not 2011.

  Specifications to run SBC 2011, the minimum hardware requirement is a quad core processor, which is not your PC.

  Windows Small Business Server 2011

  Small business doesn't have to limited operation. With Windows Small Business Server (SBS) 2011, you get a complete solution, designed for customers who want to technologies of the company in an all-in-one package that is adapted to the needs of small businesses and priced accordingly. Windows SBS Essentials is the ideal solution for businesses with 25 users or less and Windows SBS 2011 Premium add-on provides a flexible and economic solution for the deployment of additional servers.

  • Get the best first server for your business with SBS 2011 Essentials: Enjoy full support for your small company of 25 or fewer users with this server designed to facilitate connection to the cloud and integrate with local and online services.
  • Protect client and Server data : Easily back up your data on internal or external hard drives.
  • Enter your business safely network: Remote Desktop Web Access allows you to access your network securely.
  • Keep in touch with the support of the mobile device: Work from your Windows Phone 7 or other phone compatible Internet.

• Cannot add computers to an SBS 2011 Standard field; Connect the missing site

  I installed SBS 2011 as a new installation.  Things seem to go well... no error and the system works, works by e-mail.  The problem is that when I try HTTP://connect or https://connect to add a computer to the domain of errors.  When I go in IIS there is no Connect Web site.

  How this site to install without having to reinstall my entire operating system?

  Thank you all in advance for your help and assistance.

  See you soon,.
  Cameron

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• SBS 2011 Bootmgr missing

  I have a Dell T110 II with SBS 2011 Server installed. I get an error message Bootmgr missing

  When I boot to the installation media and select Repair, the repair goes directly to recreate the Image on your computer and does not give me the options described in https://support.microsoft.com/en-us/kb/2501318

  I have a backup, but would rather just repair the bootmgr but I can't go to the repair of the tools on the installation media

  Thanks for any help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 - delete shadow copies directories and cannot get the backup to work

  Help, please...
  I just installed SBS 2011.
  When I saw the low disk space getting I profiled in the directory structure and noted that most of the space was taken by windows.oldxxx directories. So I deleted one.
  But it was a bad idea. Then I realized what I did and used the vssadmin console to delete shadow copies etc. and even disable the shadow and recreate them via the computer, shared management gui.

  But now, backups fail to complete... shadow copy operation failed with error Ox800423f0.
  In a bit of panic, I deleted the rest hoping he would rebuild itself... no luck.
  I don't really know what to do.

  Is there a way to start everything again.

  Please... Please, I'd really appreciate a solid direction.

  Thank you

  Hello cvcnow,

  I would suggest trying to perform a restore of the system, prior to installation of SBC 2011.  I do not know what operating system you use, but included some links for Vista and Windows 7.  If you are running Windows XP, please let us know what version and service pack.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• SBS 2011 DVD wouldn't work, cannot restore.

  I recently had a scare at the restoration of SBS 2011.

  Basically, I had a problem where I couldn't boot into windows server 2008.  I do daily backups of windows, so I thought no worries, I will simply bring until yesterday.  I started on Windows SBS 2011 DVD I used to install it and click on restore and it told me that it wasn't the right version for the restoration, even if it's the CD that I used to install it (I upgraded service pack for installation).

  Basically I could not access the restorations on my backup drive because he told me that it wasn't the same version of windows.

  How can I fix this is do not have another DVD and windows do not allow me to create a restore in WIndows 2008 server startup disk, as they now rely soly on the installation DVD?

  Part of the problem may be the server that is installed was a server Fujitsu requiring the installation of sbs in a quite unique way which was a pain, but I guess only on that.

  Please help!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 no usb drives

  You have learned to be joke me! No direct path to SBS 2011 forums. With confusing like all the getout of here. No wonder that support is pathetic. where is the Server forums GISH?

  It is a forum for specific consumers.

  You will find support for SBS in this TechNet forum: http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver

• Windows SBS 2011 MS transportation service continues to stop

  Continuous transport of Windows SBS 2011 MS downtime, users cannot send or receive e-mails.

  I renamed the file queues to old but the problem persists. Help, please.

  Joshua,

  I would have you post here for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer

  Thank you.

• SBS 2011 style Web Access on 2008 R2 Enterprise

  Hello

  Basically, I want to install a webpage type SBS 2011 remotely to my 2008 R2 Enterprise server. I can't connect a SBS server to my existing domain so is there a way to do this?
  Any help would be appreciated.
  Ed

  Hi, Ed,

  I think your question would be better served if posted in the Forum Windows Server on TechNet

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Useful links

  http://TechNet.Microsoft.com/en-us/library/cc731923.aspx

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/1bf1d395-cac8-4a62-8E94-20d04ebc0ae0/unable-to-remote-access-my-Server-2008-R2

• SBS 2011 VSS errors - Spfarm keeps recreating

  Several SBS 2011 server we installed continue to flow upward with errors of 1736 SPFARM.

  We followed the guide here: http://support.microsoft.com/kb/2537096

  This works perfectly, however after a few weeks the spfarm registry key has re-created itself, so to appear these mistakes again. We still delete it and it keeps recreate it.

  Has anyone else had this issue and how to resolve?

  It serves as a forum, people using Windows home versions and you will likley not to get a good answer here, use instead of Windows Server support forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Problem connecting to SBS 2011 essential

  Although my laptop connects OK and other laptops, my PC refuses to connect. I looked for answers technical and follow-up procedures, but still no joy. PC is running W7 professional.

  Initially the first attempt failed, and that's where everything went wrong. I changed the names and profile of PC. I ignored error, that say technical notes, but system re - then configure PC to another losing all my configurations for the programs, mail etc. I tried everything I know but still PC does not connect normally. The server shows that my PC is not connected. It's frustrating, because it's day 7 in my attempt to solve this problem.
  Help would be appreciated.

  Hi Ascottgent,

  Any questions about SBS 2011 essentials, please go to the forum here:

  http://social.technet.Microsoft.com/forums/en-us/category/SBSServer

  Thanks for posting your question in the Microsoft answers Forum!

• Hi, we are a provider of disability. We have SBS 2011. Access 35 server now. You want to 125 so they can get the email and sharepoint.see below:

  Hi, we are a provider of disability. We have SBS 2011. Currently we have about 35 access to the server. - 9 direct to the server and remotely via web browser rest (we understand it goes to 75 licenses?) We want to add our support staff total 125 to pass the email and sharepoint. Only 35 max could be connected at all times. We have about 35 PC that would have access to the main server of 10 sites. do we need to move away from SBS 2011?... Thanks Jack

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning