UCS Auto-deploiement of the configuration using PXE and double vNIC

Similar Questions

• Web server plug in the configuration of Reporting and analysis

  Hi Hyperion gurus,
  
  Please suggest: -.
  
  at the time of Configuring Reporting and analysis (taken from Web server in the configuration of Reporting and analysis)
  
  What Web server I would prefer to use for planning and working space (Apache HTTP server/IIS HTTP Server) I'm having IIS installed on my environment.
  
  If you're suggesting IIS: HTTP Port?
  
  He suggested that if I select the Apache HTTP Server Port: 19000
  
  Somewhere I read the required planning installed IIS server that's why I'm confused.
  
  
  Thanks for the reply in advance...
  
  
  Thank you
  Kumar N

  Hello

  It is up to you what you choose, most people go with the apache plugin and would go for this one, it is much more robust and rarely there at - it problems with it. The apache option will install all necessary files.

  You've probably read that you needed IIS to use EPMA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

  Hello

  Apple has not yet announced a.

  You can submit your comments and suggestions to Apple here:

  https://www.Apple.com/feedback/iPhone.html

• I format the machine. How to back up the configuration of Firefox and bookmarks for re-installing later?

  I need to reinstall my operating system to windows 7. Firefox works fine. All I need is a procedure to save the configuration of Firefox and bookmarks to facilitate the configuration process when I re - install Firefox later. Thank you

  Firefox stores all your information in a folder called "account profile". If you back up to the top (on a USB key, for example), you can copy it back later after you have reinstalled your computer (including Firefox, of course) and all your settings, passwords, bookmarks, etc. will be present again. Take a look at: back up and restore the information contained in the profiles of Firefox.

• At the start, my phone freezes on the configuration of updates and restarts

  At startup, my phone freezes on the configuration of updates and restarts. It won't let me even put my password. Automatically, it restarts and continues to do the same thing over and over again... I need help!

  What were the results of the test of the hard drive?

  It seems that things go too far and you need to perform a factory restore and reinstall the files on your system.

  Repeatedly press the F11 key at startup to enter the Recovery Manager, and then follow the instructions.  I hope that the recovery partition is not damaged.

• How to insert image from mysql into the table using php and create the checkbox in the table?

  How can I insert image from mysql into the table using php and create the checkbox for each data as a vote? Here is my code...

  WELCOME

  connect_error) {die ("connection failed:".)} $conn-> connect_error); } $sql = "SELECT no, Calon, ID, of course, the Image OF THE candidates." $result = $conn-> Query; If ($resultat-> num_rows > 0) {echo ' '; export data of each line while ($row = $result-> fetch_assoc()) {"echo"}}

  NO	Candidate	INFO	Vote
  " . $row ["no"]. "		-" . $row ["Calon"]. " -" . $row ['ID']. " -" . $row ['class']. " "; } ECHO ' ' ;} else {echo '0 results' ;} $conn-> close();?} > hope someone can help me because I am a newbie in this program... need to finish this project... Thank you.

  If you have saved the file name in the database, it's pretty simple.

  echo '';
  

  Is the same for the box:

  echo '';
  

  If you have saved the image file in the database, it is much more complicated. I recommend you store only the file name in the database.

• the tag of 'mode' in the editable using getconfig() and setconfig() vhost.xml file?

  the tag of 'mode' in the editable using getconfig() and setconfig() vhost.xml file?

  Use the same code I gave before, simply replace:

  admin_nc. Call ("setConfig2", new Result1 (), "Proxy/Mode", "remote", "Adaptor:_defaultRoot_ / VHost:_defaultVHost_");

  by

  admin_nc. Call ("getConfig2", new Result1 (), "Proxy/Mode", "Adaptor:_defaultRoot_ / VHost:_defaultVHost_");

  Redefine Result1() as:

  function Result1() {}

  this.onResult = {function (info)}

  If (info.code == "NetConnection.Call.Success") {}

  for {(i in info.data)

  trace (info. Data [i]);

  }

  }

  }

  }

• question related to the configuration of POF and use-sub-classes

  Hello
  
  I noticed that by default POF in coherence.jar (coherence-pof - config.xml) requires the use subclasses true indicator (the ultimate-sub-classes use value is true if any POF loaded configuration file specifies that it is true), and making it impossible to obtain if certain error messages a subclass of a registered type is not listed specifically in the POF-configuration and users can silently losing data in this way.
  
  My question is:
  
  The indicator of use subclasses in coherence-pof-config. XML set to true only because of Throwable-s, or are there other classes provided by coherence that are serialized by a resolution of the subclass and so dependent on the indicator of use subclasses being true?
  
  If only the Throwable-s which depend on, instead of set to true, can we set it to false and use the following instead of ConfigurablePofContext as class the class serializer for POF-enabled services:
  

  import com.tangosol.io.pof.ConfigurablePofContext;
  import com.tangosol.run.xml.XmlElement;
  
  /**
   * This class extends ConfigurablePofContext with the possibility to
   * configurably disable the subclass-allowed setting forced true in the
   * coherence-pof-config.xml, and still be able to use ThrowablePofSerializer for
   * each not specifically configured Throwable subclass.
   *
   * @author Robert Varga
   */
  public class ThrowableAwareConfigurablePofContext extends
        ConfigurablePofContext {
  
     /**
      * By setting this flag to true, it is possible to disable subclass
      * resolution. Interface resolution remains untouched.
      */
     private boolean m_fDisableSubclassAllowed;
  
     /**
      * {@inheritDoc}
      */
     public ThrowableAwareConfigurablePofContext() {
     }
  
     /**
      * {@inheritDoc}
      *
      * @param sLocator
      */
     public ThrowableAwareConfigurablePofContext(String sLocator) {
        super(sLocator);
     }
  
     /**
      * {@inheritDoc}
      *
      * @param xml
      */
     public ThrowableAwareConfigurablePofContext(XmlElement xml) {
        super(xml);
     }
  
     /**
      * Sets the {@link #m_fDisableSubclassAllowed} flag. You can set this as an
      * <init-param> in the Coherence cache configuration file.
      *
      * @param disableSubclassAllowed
      */
     public void setDisableSubclassAllowed(boolean disableSubclassAllowed) {
        this.m_fDisableSubclassAllowed = disableSubclassAllowed;
     }
  
     /**
      * @return false if disableSubclassAllowed is true, or result from the super
      *         implementation otherwise.
      */
     @Override
     protected boolean isSubclassAllowed() {
        return (!m_fDisableSubclassAllowed) && super.isSubclassAllowed();
     }
  
     /**
      * If the super implementation could not resolve the type id for the class,
      * and subclass-allowed is disabled and clz is a {@link java.lang.Throwable}
      * subclass then it falls back to the configuration for
      * {@link java.lang.Throwable}.
      */
     @Override
     protected int getInheritedUserTypeIdentifier(Class clz) {
        int result = super.getInheritedUserTypeIdentifier(clz);
        if (result == -1 && !isSubclassAllowed()
              && Throwable.class.isAssignableFrom(clz)) {
           result = getUserTypeIdentifier(Throwable.class);
        }
        return result;
     }
  }

  Thank you and best regards,
  
  Robert

  Hello

  Ok. Here goes. Yes, you are right. If you can tolerate interface use being true, the only thing you have to worry is Throwable instance (or subclasses it) in Java and Exception instances (or subclasses it) in .NET.
  Please let me know if you have more questions.

  Best regards
  -Dave

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• How to paste some data from numbers to some placeholders in the Pages using AppleScript and Automator?

  ​

  Hello AppleScript and Automator Pros!

  Unique ID	Elements	Quantity	Unit of measure	Sum, $	Color	Dark?
  1	Pencil	1	Agenda	90.50	P	Yes
  2	Pen	150	Agenda	300.23	THERE	NO.
  3	Pillow	2	Agenda	400.01	B	NO.
  4	Toy	114	Agenda	500.30	R	Yes
  5	Repair service	N/A	N/A	1.00	N/A	NO.
  6	Phone	98	Agenda	1986.10	W	NO.
  P = purple Y = yellow B = black R = red W = white

  It was an example of Document numbers

  
  

  Now the example of Document Pages

  [PH for Unique ID] - Ben got: [PH for element], [PH for quantity] [PH for unit of measure], [dark or not PH] [PH for color] for [PH for sum before the comma] $ [PH cents] c.

  When Ben had [PH for quantity] [dark or not PH] [PH for Color] [PH for item tiny first character and changeable if necessary end], he became happy

  Example 1: Allows you to take data from line with Unique ID 1 and that's what it takes to go:

  1 - Ben got: pencil, 1 point, violet dark 50 ° c for $ 90.

  When Ben had 1 Purple Pencil dark, he became happy

  Example 2: Now data row with Unique ID 3 and it is what to get:

  3 - Ben got: Pillow, 2 pieces, blue for $ 400 01b

  When Ben had 2 blue pillows he became happy

  Example 3: Now the data used to row with Unique ID 5 and this is what it takes to get:

  5 - Ben got: repair service, 1 service, for 1$ 00 c complete

  When Ben had 1 repair service complete, he became happy

  Here, I have to change given n/d of the table in numbers and replace quantity with 1 PH, PH for unit of measure with service (no point as in the previous examples) and the PH for color with plenty of example.

• When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

  When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

  You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

  I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

• explain the plan using plan_hash_value and runtime

  Hello

  Please let me know the syntax to get the plan to explain using sql_id and plan_hash_value.

  Also let me know how to find out the same sql execution times in the previous months. I have the ID value of sql.

  Kind regards

  VN

  > Is it possible to check how long the sql finished in the previous months?

  Of AWR / StatsPack reports.

  Or use awrsqrpt.sql which can query the repository for a single SQL_ID AWR.

  However, you must have the AWR data kept for 4 months.  The default retention is 7 days.

  Hemant K Collette

• Window pop-up with a message to the user using ADF and Java bean

  Hello
  
  I am able to download the file using the 'fileDownloadActionListener '. In case if I could not find the file to the location of the server, and then must show an error to the client using a popup.
  
  Can you provide links, if available.
  
  
  Kind regards
  Stalin

  See http://tompeez.wordpress.com/2011/07/14/validate-data-before-export-via-afexportcollectionactionlistener-or-affiledownloadactionlistener/ which describes a similar use case.

  Timo

• Helps the query using case and County

  Hello!
  
  I have problems with a small part of a query below that finally can settle the invoice price.
  
  (count (distinct spm97.sample_id) * 36.1) as "PROFILE."
  case count (distinct spm33.sample_id)
  When (count (distinct spm97.sample_id) = 0) then (count (distinct spm33.sample_id) * 26)
  another (count (distinct spm33.sample_id) * 4.75)
  put an end to 'CC ',.
  
  The first line works - 0 or 36.10 is returned depending on whether or not a profile has been ordered for the sample.
  
  The cost of CC is 4.75 if a profile was also sentenced, if it isn't then the cost is 26. The case statement is supposed to verify this and return the exact amount, but I can't make it work... I get the error message that a closing parenthesis is missing somewhere in the middle of line 3, if that helps.
  
  Any advice would be much appreciated! Of course, this isn't the entire query - joins and all are all working well, it's just this little section with the County that I can't just.
  
  Thank you
  
  JO

  the piece of code below, seems to me is incorrect

      CASE COUNT(DISTINCT spm33.sample_id)
          WHEN
              (
                  COUNT(DISTINCT spm97.sample_id) = 0
              )
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

  It seems that the requirement here is that if * 'COUNT (DISTINCT spm97.sample_id) = 0' *, then * "CC" * should be ' COUNT (DISTINCT spm33.sample_id) (* 26) "ELSE, it should be" COUNT (DISTINCT spm33.sample_id) (* 4.75)»
  If this is the case, the statement must include:

      CASE COUNT(DISTINCT spm97.sample_id)
          WHEN
              0
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

• Need help: the value of checkbox auto fill in the field of text and text field calculation

  Noob on this site.

  So I currently have a form to fill out, asking me if certain actions are possible. I am fairly new to the technical aspects of livecycle so real with me if you can.

  I have a series of 4 boxes with values assigned to each. Below the 4 boxes, I have a 4 additional text fields at least one fields relate to one of the 4 possible box selections.

  OK, here we are so spare with me:

  Is it possible to link the 4 boxes in the text field below, i.e. When you click on one of the 4 boxes, the included value apart from that the check box automatically to fill the text field below about 4 possible selections?

  Second question: How can I change the text field automatically calculate numeric values with the 4th text field ending by the result of the calculation?

  example below

  Accounting by year	Checkbox
  100
  120
  144
  160

  	Text fields	Comments
  Holiday balance
  Less expenses to pay for a year		-> That's where I want the box above for AutoFill when selected above
  ( = )		I want this field to subtract the 1st class area and 2nd givign me total
  Eligible to convert hours: 50% of the balance above

  
  I want this field to take the total field above and divide by 2

  Can anyone help please. Thank you

  If I'm working on the fact that the four items of the table is called:

  1. currentBalance
  2. accrual accounting
  3. Balance
  4. eligibleHours

  So if you go on the 3rd field (balance) and have the following text in the calculate (JavaScript) event:

  this.rawValue = currentBalance.rawValue - accrual.rawValue;

  In the area of 4th (eligibleHours) and have the following text in the calculate (JavaScript) event:

  this.rawValue = balance.rawValue / 2;

  Niall