G3110 Scanner: g3110 no longer works in windows 7

Similar Questions

• Scanner Compatability__I'm trying to get my scanner Visioneer 9320 to work under Windows Vista without result. Help please.

  I'm trying to get my scanner Visioneer 9320 to work under Windows Vista without result.  Help please.

  Hi Viver,

  While I have been researching the issue, I met that the scanner model is not compatible with Windows vista and also similar told by the visioneer in the link to their website below.

  http://support.Visioneer.com/products/9320/downloads.asp

  You will need to contact the visioneer to see if they have no update or the hotfix released for Windows vista.

  http://www.Visioneer.com/company/contact/

  http://www.Visioneer.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The spare economy is no longer work in windows mail.

  The spare economy is no longer work

  Original title: Windows Mail.

  Hello

  1. what happens when you tried to save attachments?

  2. do you receive any error messages?

  I suggest you to run the troubleshooter for further troubleshooting step and check with the question.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
   
   
   
   

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »

  See this link for more information on:

  http://support.Microsoft.com/kb/555375

   

• Scanner Epson does not work in Windows 7

  my epson nx230 scanner has stopped working with windows 7.  I have uninstalled, reinstalled, loaded new drivers and nothing works.  What should I do next?

  Hi katy,.

  Welcome to the Microsoft community. It looks like the Epson scanner does not work as expected.

  We need additional information about this problem to help you better:

  1. What do you mean by scan has stopped working?

  2. do you get an error message?

  3. were there any changes made to the computer before the question?

  Provide us with more information on this problem for you help the better.

• Skype no longer works on Windows 7

  I installed the new version of Skype, and it no longer works. After re-installation: same problem.

  any idea what's going on here?

  Thanks, Herm

  Skype is a updated version that resolves the problem.

  5.3.0.116

  http://www.Skype.com/intl/en-us/get-Skype/on-your-computer/Windows/

  http://heartbeat.Skype.com/

• Canon MP600R scanning no longer works with Windows 8

  Just upgraded to Windows 8. My Canon MP600R printer must be compatible, however the scan function will not longer work.

  Is there an easy solution?

  The upgrade wizard has pointed out that there is a solution "payd" but does'nt me more help.

  The functions of the printer are doing well.

  I experienced the same problem with a Canon Pixma MP600 and an iP2550 Pixma.

  I downloaded the Canon My Printer Windows 8 compatible version (mypr-victory-3_0_0 - ea11_2.exe) and it works, but no driver Windows 8 is available at this time for two printers :-)
  I will contact Canon Help Desk tomorrow and let you know what they're going to respond to me.

• sky no longer works with windows 8.1

  Hello, my sky management software no longer works and tells me error: camconfig.cpp 507

  What do I do
  Thank you
  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice.
  The Forum in which you've posted is for English only.
  If you can't find the desired language, support for additional international sites options are by following the link below:
  
  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• Keyboard no longer works in Windows 8

  I have a HP pavilion G6 C0Y35EA #ABU model number. I got an automatic update of Windows 8 and my keyboard stopped working immediately after.

  I checked Device Manager and it says it has no keyboard and gives a code of C24.

  If I go into the installation program until Windows keyboard works fine so I know this isn't a hardware problem.

  Any advice please know how I can get my keyboard works in windows again?

  Thank you

  Hello

  Try the following.

  Open windows control panel, open Device Manager, expand keyboards, right click on the device showing the rror code and select uninstall.

  When done, shut down the laptop - it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Mouse and keyboard no longer works in Windows XP Media Center edition

  I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude!

  Hi Keith,

  Thank you for your response and keep us updated.

  I suggest you run the fix from the link next and if it helps.

  USB devices stop working in Windows XP Media Center Edition

  http://support.Microsoft.com/kb/890546

  If the problem persists, feel free to let us know. We will be happy to help you.

• Netflix no longer works in Windows Media Center

  Hello!

  Recently (a week ago) my Netflix stopped working through Windows Media Center.  When I try to start the Netflix app in WMC, I just get the message 'there is a problem with the application.  Try again later. »

  I reinstalled Netflix in WMC, update of Silverlight, and yet, it does not solve the problem.  However, on some other user accounts on my computer it works fine again.  I don't know what to do.

  Help?

  I started having exactly the same problem a couple of days. The only thing that I did is to install Visual Studio 2010 and Silverlight 4. Since Netflix is a Silverlight application, I'm guessing this has something to do with it. Upgrade Silverlight this week?

  Now I'll uninstall Netflix in Windows Media Center and Silverlight 4, and then reinstall Netflix in Windows Media Center. If this solves the problem, I'll report back.

  Update : I have uninstalled both in the order above. Then I ran the Media Center and clicked on Netflix. It prompted me to reinstall the Netflix player, that I let him. As soon as it was over, I have connected and managed to go my instant queue (it wouldn't let me do it before).

  Then, I tried to look at something and was motivated I need Silverlight. I let it install, knowing that Silverlight 4 is now current. However, he installed Silverlight 3.0.50106.0 . Now he can play very well, however.

  Update #2: I closed Windows Media Center and went to http://www.silverlight.net. Here, I chose "Windows Runtime" in the box "Install Silverlight". This updated my system for Silverlight 4.0.50401.0 . I started Windows Media Center, choose something in my instant queue and began to watch.

  So, my conclusion is that maybe it was a problem with Silverlight all along. Try to uninstall Silverlight on your system and put it back in place, starting from silverlight.net, or let the Netflix player to do it for you.

• Dell Pro 11 venue buttons power no longer works under Windows *.

  Just got my mobile keyboard yesterday. I upgraded my BIOS A05 yesterday installed the 'Fix Power Settings' and ran the Windows updates. Now all of a sudden the power of tablets button does not work in Windows 8.

  I thought that this could be a BIOS problem. That's how the buttons currently work in Windows 8:

  • By pressing the power button once the time puts more sleep. I checked in the profile of power by pressing the power button is put to sleep for the two battery and plugged.
  • Not holding the power button down for 5 to 10 seconds none liked shutsdown Windows.
  • Now the power button for 60 seconds hard turns off the tablet.
  • Volume buttons work 100%.
  • Hold the power button when the Tablet is off turn on the tablet.

  Does anyone else have this problem? Any ideas on how to solve this problem?

  Hello

  Download the hotfix installation and dell, it should work.

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=CXWWX

• Macro switch window mouse no longer works on Windows 8

  I have a simple macro to switch window I've used for years on Windows 7. Here is the content of the file macro mhm , produced by Centre of keyboard and Microsoft mouse:

  
   56
   10
   15
   10
   15
   10
   56
  

  As you can see, it is a simple Alt + Tab sequence. It works fine on Windows 7 (and in a computer virtual from Windows 7 on my new machine Windows 8), but has no effect on Windows 8. I tried the "Next window" option, with mixed results (he has a bad habit of jumping to the window, as if cycling through each window open; and it does not work with the new Windows Store applications).

  How can I get the simple Alt + Tab feature works on Windows 8? Thank you!

  I just bought a Sculpt Comfort Mouse. Unfortunately, I couldn't reproduce nubi2kof macro on the mouse and keyboard Centre 2.3.

  I guess Alt + Esc as S3rgio suggested mapping, works for most people. You can do this on the mouse and keyboard Centre 2.3 (without using AutoHotKey), although...

  The problem with Alt + ESC is that it does not work with Metro applications and you cannot switch between two applications, as you can do it with Alt + Tab. So I ended up doing an AutoHotKey Script to try to imitate the behavior of Alt + Tab and the mapping of the mouse for this shortcut key (Win + N in my case):

  #n ::

  AltTabTimeout: = 2000
  SleepBetweenKeys: = 10
  DesktopClass: = 'WorkerW. '
  If (A_PriorHotkey = A_ThisHotkey & A_TimeSincePriorHotkey)<>
  WinGetClass, activeWindowClass, A
  If (activeWindowClass = DesktopClass) {}
  inverse: = 1
  } else {}
  If (reverse % = 0) {}
  AltTabCount: = ++ AltTabCount
  } else {}
  AltTabCount: = - AltTabCount
  If (% AltTabCount % = 0) {}
  inverse: = 0
  }
  }
  }
  } else {}
  AltTabCount: = 0
  inverse: = 0
  }
  Run C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk
  Sleep, SleepBetweenKeys %
  Loop, % AltTabCount % {}
  Sleep, SleepBetweenKeys %
  SendInput {Tab}
  }
  Sleep, SleepBetweenKeys %
  SendInput {return}
  return

  I hope this helps...

• Brother MFC-9130CW scanner no longer works with Windows 7

  My MFC-9130CW scanner stops inexplicably scans to my PC one day.  It worked great for several weeks but now, whenever I try to scan (either from the machine itself or the center of Brother on my computer), a generic "scanning failed" message appears.

  I contacted Brother support and they had me uninstall all software/drivers Brother and reinstall them, but I get the same error message when trying to scan.  IP address of the machine is valid, it is connected to our wireless network (I can print wireless) and I have even disabled the Windows Firewall (as support suggested brother).  Nothing works.  I am at a loss, because I have not changed anything that is related to my OS.

  The fact that you cannot scan even from the front Control Panel suggests that the machine has an internal problem that could fix only repairers specialist Brother or printer...

  There is a one year warranty on the machine. You should get it back to brother as soon as possible if the warranty is still good...

• Scanner HP C4180 no longer works in Windows 7

  Scan to microsoft works is no longer an option after installing Windows 7.  I downloaded additional device driver successfully.  Printer works fine.

  Hello

  ·         are you able to scan documents normally on the computer with other applications?

  I suggest you to install the full feature software and drivers by visiting the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74950-2&LC=en&DLC=en&cc=us&OS=4062&product=1141647&sw_lang

• "Help and support" no longer works for Windows 7 reviews

  "Help and support" on my Windows 7 does more for me as a user. It worked well for years and still works if I log in as an administrator. As long as user, I get the "help and support" and then search engine whatever it either in the search box returns with '0 results for the WORD '. For example if I am looking for the word 'file', he returns with "0 results for file .

  How can this be repaired? I really liked being able to use the search of Win 7 "help and support" feature thank you.

  If you mean that you see something like this:

  

  Search Google says to disable this check box under Options, settings:

  

  Results: