"Help and support" no longer works for Windows 7 reviews

Similar Questions

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• Help and Support has stopped working

  When I try windows help, I get a box error 'help and Support has stopped working", followed by another error box"Problem Reports and Solutions has stopped working ". I get a similar error of Skype and other programs. Help, please.

  Thank you
  Vrat.

  Hello

  (1) did you of recent changes to the system?

  Method 1: Run a sfc scan.

  Follow the steps in the below link to perform a sfc scan and look for errors.

  http://support.Microsoft.com/kb/929833

  Check if an error occurs.

  Method 2: Perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  It will be useful.

• Windows XP Help and Support does not work anymore!

  Help!  One day, when I clicked Start and then click Help and support , nothing's happened.  Is there anything, after that I clicked it that nothing came.  There was no error message nothing.  I tried to back up using windows Explorer, but could not get it to come.  I ran Microsoft Security Essentials scans (I use Security Essentials) and two online programs for viruses and dracovenii.  I don't remember anything that might perhaps explain this.

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  (2) when was the last time it was working fine?

  I suggest you to follow the steps from the article below and check if it helps:

  Cannot load help and Support Windows:

  http://support.Microsoft.com/kb/555472

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Hope this information is useful.

• Help and Support does not work as you wish

  Original title: Help and Support Center

  I'm finding that doing a search using Help and Support Center search box, looking for is more responses on the microsoft site, as it has already done. This aid was dropped for Microsoftxp home version 2002 service pack 3 , or is there a problem that I don't know about my system? Any help or information would be appreciated.

  For those who have experienced this problem

  I note that all solutions have been validated, IE

  1 re - install & support.

  2. run SFC/scannow,

  3. create a new user profile by means of microsoft suggeted,

  "Are not, (I repeat, not) work to solve this problem.»

  The only solution I've found that works is to

  1 create a new user

  2. move ( NOT copy) all of your files and folders in My Documents,my music, my pictures, and my videos folders of your damageduser profile for the new user profile in place corresponding installs under this new profile.

  3. do not copy or move hidden files or folders that you do not have created and hidden from yourself.

  4. you must also ensure you save settings, emails and contacts (contacts already in the .pst in Outlook file) by using the appropriate method for your e-mail program to allow for the recovery of these in your new profile.

  5. you can export your Favorites RSS (and biscuits)Internet Explorer under your old profile to a file in your new profile, and then import them from your new profile, after that you run Internet Explorer from here.

  6. don't worry about the programs, they are available to all users.

  I hope this can help someone else, who had the same problem I did.

  Aussie

• help and support will not work

  My HEP and support does not start on my vista

  Not your problem in the following category falls...
  "If when you try to open help and Support in Vista and you get an error message and help does not correctly open, or you receive a message that WinHlp32.exe is no longer supported, then this will show you how to fix these errors common and other assistance and extra"
  If so, please try the tutorial below:
  http://www.Vistax64.com/tutorials/87497-help-support-Vista.html

  A system restore may also make the thing as long as this problem started not more than 10-15 days ago, and you remember the date subject & assistance worked very well.
  Here is the tutorial:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• Mouse and keyboard no longer works in Windows XP Media Center edition

  I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude!

  Hi Keith,

  Thank you for your response and keep us updated.

  I suggest you run the fix from the link next and if it helps.

  USB devices stop working in Windows XP Media Center Edition

  http://support.Microsoft.com/kb/890546

  If the problem persists, feel free to let us know. We will be happy to help you.

• Help and Support does not work does not correctly when you are connected to the Vista administrator account

  Click the startup of Vista and in the Search box , type WINVER , and press the Enter key on your keyboard.  Please report back with the correctVersion number and build shown . Carey Frisch

  Version 6.0 (Build 6002: Service Pack 2)

  I have the same problem exactly as described Flashimator don't except this: the problem occurs only when I am logged into the administrator account.  Support seems to work normally in my user account.

  I should add that my HP laptop has an OEM program which seems to be an overlay on the Windows Help.  It is also not available in the administrator account.

  (HP Pavilion dv9260us, Vista Ultimate x 64, Intel Core 2 Duo T7200 @ 2.00 GHz, 2 GB RAM)

  Thank you.

  PS It is often more important to have help available when logged in as an administrator as I do only when I have to (as in the resolution of problems).

  Hi Dyn0saur,

  Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  Regarding your question, see the article following some possible troubleshooting for your question:

  http://support.Microsoft.com/kb/917607

  In addition, an article on content help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-the-latest-Help-content

  Thanks for visiting the site of the community of Microsoft Windows.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Help and support has stopped working (Vista)

  Well basically I get the screen of Windows security alerts reminder (would like to disable the account of the user control to pass his remarks).  So I thought, what the hell I'll click the blue how to help my computer control user account.  So that's what I get and I'm scratching my head to make it go away! Suggestions:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: helppane.exe

  Application version: 6.0.6001.18000

  Application timestamp: 4791945e

  Fault Module name: apss.dll

  Fault Module Version: 6.0.6001.18000

  Timestamp of Module error: 4791a 630

  Exception code: c0000005

  Exception offset: 0001ca6b

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Read our privacy statement:

   

  Hi Msalice,

  Welcome to the Windows Vista answers Forum!

  I have a few questions about your question:

  (a) when exactly you receive the error?

  (b) how long have you encountered the problem?

  (c) have you installed the Windows updates or software installed

  You can try to disable user account control. Follow the below given steps:

  1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on turn on UAC enabled or disabled. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the check box to turn on UAC, or clear the checkbox to disable UAC use User Account Control (UAC) to help protect your computer , and then click OK.

  For more information, please visit the below given link:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  You can also try a system restore to set the system to a point where it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Office applications and others no longer work on Windows 7

  I used msconfig.exe and Task Scheduler to disable bloatware and now many apps will not work.

  I receive messages such as:

  Windows cannot find "C:\Program Files (x86)\Wondershare\PDFelement_bing\PDFelement.exe'.)" Make sure you typed the name correctly and then try again.

  I get this even if I click the .exe file directly. I did everything except the Container.dll bottom, which I removed as I was led to believe that he is a dangerous file. Still no luck. Software not working anymore. I can't roll back to a previous restore point as by computer, has never been able to do despite all my efforts, and I've never been able to get any type of backup to work either.

  Someone at - it an idea what causes this problem?

  Hello

  Thanks for posting your query on the Microsoft Community.

  This could be due to some system conflicts.

  Try the methods.

  Method 1:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Method 2:

  I suggest to create a new user profile and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• product key no longer works for windows vista service Pack 2

  can I get the product key without buying?

  Probably not, but here are some possible links that may help (probably not):

  How to identify, locate, and replace a product key - http://support.microsoft.com/kb/811224 replace lost Office product keys 2003, 2002, 2000 http://office.microsoft.com/en-us/help/replace-lost-office-product-keys-HA001150834.aspx
  How to replace Microsoft software or hardware, order service packs and replace product http://support.microsoft.com/kb/326246/ manuals
  Replacement CD - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/replacement-cd/fb8230d4-000f-4ee7-b732-c9f8fff28bfd

• make a power system restore was interrupted restore now dosent work or help and support application how can I solve this

  system restore interface rises but calendar with restore points does not help and support will not work or windows search the restore interface is frozen and will not otherwise allowany

  Hello, Peter,.

  I understand that you are in a position of power, correct?

  Right-click on command prompt and select run as administrator

  Type the following command:

  CHKDSK /f /r

  Press enter

  You will see a message about the volume must be locked and you want to scan on reboot.  Press Y, and then press enter

  Restart your system and let the scan windows, fix and repair files

  New attempt of restoration of the system

  If this does not work, repair your system by rebooting and the Logo of computer start typing F8 or F10

  (I don't know the manufacturer of your computer).  Select the option fix my computer.  Follow the prompts

• The guide to "Help and Support Center" installed for Windows XP Media Center 2004 is largely outdated and must be updated.

  I have version Dell of Windows Media Center 2005 (service pack 3) installed on my XPS 600 desktop computer.  The installed Help and Support Center guide date for use with Windows Media Center 2004 and has never been updated to include most of the changes system over the past six years. Dell or Microsoft should be responsible for the update of the guides or instructions that are installed on the operating system. Not only that, but Media Center and Movie Maker themselves also grossly neglected as updates are concerned.
  The currently installed Help and Support Center guide is missing details on significant changes to Windows applications and utilities.  I rely on up-to-date information to make changes to my OS applications and utilities.  There is a lot of information in this guide that is incomplete and misleading and therefore not very reliable.
  I have an OEM of Windows XP version and I wonder if there is an update of current or replacement for this system guide and who is responsible for the update.

  Nothing in XP will be updated. The current Windows operating system is Windows 7. XP is already three iterations of the windows behind. A great substitute for the XP search feature (which was never very good) is Agent free Ransack.

  http://www.Mythicsoft.com/agentransack/ MS - MVP - Elephant Boy computers - don't panic!

• Get help to use local help and support Help Center for XP sp3

  Help and support center does not open, msg says help and support service does not work, but check indicates it is enabled, but error msg says 1083, the program does not work?

  To get ideas that are not a wild-goose chase or a waste of your time, you should try to post the exact error messages you see and not paraphrase them.

  For example, you see a message like this?

  Windows cannot open help and Support because a system service is not ongoing enforcement.
  To resolve this problem, start the service named 'help and Support '.

  As long as the Service is not disabled (it can be manual or automatic), if it is not executed, it should start automatically as you open the help and Support Center.   It doesn't have to be set to automatic to work.

  You have checked and your help and support is not disabled, no?  If it is disabled, you will surely get that message, so it must be either manual or automatic.

  Where and how you see this message 1083 and what the program that does not work?  I don't understand that part at all if you need clarify the part.

  In addition, since the MS Answers forum still does not prompt for any information system when a new question is asked, you would be better served by answering a few questions:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the help and support used to work, what do you think might have changed since the last time it worked correctly?

  You have now or have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. one click fix, new, intuitive, errors, stop crashes, stop errors, improves, saves you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, key, key, whirling arrow or screwdriver?