G60: laptop does not power off with powered usb hub attached

I have an external powered USB hub which I attach to my G60 running Windows 7 Edition Home Premium. When I try to stop the G60 with the attached hub and under tension, the shutdown sequence passes Logging Off to Shutting Down but never completely off. Power and lighting wireless turned on and the fan continues to run.

Is there a way around it except turn off the USB hub before shutdown?

Hi @Andrew_c51 ,

I saw your post about the problems with your laptop not shutting not completely when the powered USB hub is connected. Sounds like your laptop goes into sleep or hibernation. I recommend you contact the manufacturers of USB powered to see if there is a way to stop it or just unplug the hub.

Tags: Notebooks

Similar Questions

  • Laptop does not power on battery

    Please can someone help? I use a HP Pavilion TX 2000. Suddenly, I noticed that my powers only laptop when plugged into the power, but once AC power is battery does not power the system.  The battery meter indicates 100% and shows loading icon when I use the laptop on the sector. I called HP support, but they can't help me after talking to their phone for more than an hour. I would really really appreciate if someone can help I did a test hard, reset the BIOS and update I tried also but its still the same problem.

    Thanks so much for anyone who can help. It's very frustrating.

    Hello

    You probably need the help of a real computer (no leeks and peeps store at a Best Buy or any other
    Department stores) or HP support.

    =================================================================

    This troubleshooting tool and other information might help.

    References to Vista also apply to Windows 7.

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    =================================================================

    Other information that might help:

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Battery meter: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

    Battery saver
    http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

    Solutions to common battery problems
    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    What is the precise the battery meter?
    http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

    ============================================================

    Try this - to make a Restore Point

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
    who will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • HP Pavilion 15 p150nh: laptop does not turn off completely

    Hello!

    I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
    Help me please!

    Hello

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • Toshiba 32RV635D does not power off when the computer turns off

    Hello

    I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

    With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
    This required no configuration of me, he's done right. The Toshiba TV does not work.

    With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

    Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

    I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

    The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

    I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

    Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

    Clues?

    Ricklous, it can be useful if you have a look at the url
    http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

    If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

    Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

    I don't know if this information is useful to you, but hope it helps.

    donhe7

  • 15 Pavilion: Pavilion laptop closed its doors but does not power off

    When I stopped my phone everthing seems to close except that the power is not cut.  This problem doesn't happen every time but appox 60%.  I can turn off using the power switch, but it is a pain.  Turns off the switch it starts normally afterwards. The probem can be caused by my upgrade to windows 10 I have not had any problems before.

    Hello

    Try disabling the startup of Windows 10 hybrid - you can do the following.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows and check if the laptop will now be shut down properly.

    Kind regards

    DP - K

  • Acer aspire laptop does not turn off

    Original title: acer aspire laptop

    I have intermitat problelm of I cannot close my lap top down he vist and is fully updated no error messages come it said just blocking down on the screen only to close down is to press and hold / switch help is appretiated

    Hi Markprentice,

    ·         Since when are you facing this problem?

    ·         Remember to make changes to the system?

    ·         Have you defined a plan of power on laptop?

    I recommend you perform the clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check the underside of the articles for more information:

    Why my computer won't turn on or off quickly?

    http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

    Turn off your computer properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/turning-off-your-computer-properly

    Turn off a computer: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  • My Dell laptop does not start

    I have my older Dell laptop which stop the other day and I thought that the battery had just missed completely, plugged in left to load and when I got home it turns any. New laptop for my son has had this problem and tech support had me press and repeatly F key and I think that either press and hold the power button or press the key and let go? I wanted to try this with my laptop but can not remember what F key or the thing with the power button. Help please, hoping that he disappeared were ongoing work and family top photos.

    Thank you

    Hi Appieloosa,

    I suggest you follow the steps below, first to release any static power in the laptop which may cause this problem:

    1. remove the battery and the laptop AC adapter.
    2. press and hold the Power button for 20 seconds and release.
    3 reconnect the battery, AC adapter, and then press the power button.
    4. the laptop must turn if static is the cause.

    You can press the "Fn" key and the "Power" button to run the hardware diagnostics if the laptop does not power on after following the steps above.

    Please let me know your results.

  • HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

    The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

    (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

    (2) I tried to change the power adapter too.

    The problem is that it is.

    Your advice is very much appreciated.

    Thank you best regards &,.

    Zia

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    It seems that you are not able to turn on the laptop and tried to solve the problem

    Please perform steps listed to find out if it is a hardware or software problem below:

    1. remove all cables and devices, disconnect them and try to turn on the device

    2. check the LED light situation and ensure the action of the spring button / stop is normal

    3 Exchange with a well known power cord and the AC adapter

    4 Pack no adapters are available, check if the power adaptor is slightly warm

    Note: This will give us an indication that the power adapter could be good

    5. do you know if the laptop was in battery or power adapter when you used the last time

    Note: Make sure that there is no spill of liquid or cutting

    6. check if the Port of the AC adaptor is loose/broken

    Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

    Hope this helps for other queries to answer the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • laptop will not power. No blue light with ad adapter not plugged in.

    Lately, I've been jump the battery in and out to get the laptop (dv6) to propel to the top. This afternoon after a morning's work, the blue laptop ac adapter light does not illuminate and the laptop will not power.
    Naturally, I suspect the battery, but maybe it's the AC adapter. If all goes well, it is not the computer itself!

    Any ideas on what I should buy first. Am on business in Dubai and desperate!

    Thank you
    Jeff.

    Solved. Sort of.
    I bought a new battery and everything works as it should.
    The real question now is why stop a bad battery the notebook powered with the AC adapter is plugged?

  • Laptop does not start with the connected usb device

    Hello
    Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

    THX,
    Barzot @+.

    Hello

    What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

  • 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

    Someone help me.

    HP 2000-2D02TU Power LED power switch but the laptop does not start.

    What I'm doing.

    Please help me

    Model No. - HP 2000-2D02TU

    Hello @Alok_Bhai,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the laptop won't start does not and wanted to help you!

    You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

    Computer does not start and emits a LED or beep Code

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • My laptop does not work on battery even though the indicator said there are 90% of the available power

    original title: laptop BATTERY

    My laptop does not work on battery even though the indicator said there is a 90% power disponiblesLorsque it is plugged in and charging. The battery would be dead even if she says she can still exist?

    Hello

    Check with support from the manufacturer of their books online and the drivers and their forums system
    (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
    problems.

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
    systems overload are not a problem.

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
    Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
    RESTART which will update the driver stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

  • HP dv7-3085dx power light flashes, but the laptop does not work.

    Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

    Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

    I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

    Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

    I just want to now what is the flashing light means light? Why it does not work with the new cable?

    Thanks in advance! Sorry for my bad English...

    Emilio.

    It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

    If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

  • ENVY 15-k008ne Notebook PC: my laptop does not completely turn off

    Hello

    When I have shutdown/Hibernate / standby my laptop, it will turn off completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    Try the following.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

    When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

    https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

    Once the installation is complete, restart the laptop.

    When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

    Kind regards

    DP - K

  • computer HP laptop, 2000 does not recognize tv with a hdmi cable

    my computer hp laptop 2000 does not recognize tv with an hdmi cable.  I get the error "does not recognize any other monitor" when I try to "detect".

    I have recently upgraded to windows 8.1

    I have the graphics card AMD Radeon HD 6310

    The TV is a Phillips HD TV hotel.

    My game system works using VGA cable

    Any help would be greatly appreciated.

    Hi Ringerbell,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP 2000 and connect an external TV tuner. Here is a link to connection and external display. Here is a document onthe configuration ofyour laptop to use the monitor.

    Hope this helps you.

    Thank you.

Maybe you are looking for

  • Burning a DVD of the film in iMovie

    Hi all I'm running El Capitan on an iMac (2012) older which has iDvd but I can't use it. Basically I have a home video 15-minute clips of friends wishing someone good luck.  It was filed in iMovie and said its 12 GB. I want to burn onto a dvd but my

  • Cannot install Windows on my Satellite C660-162

    I have a Satellite C660-162 and suddenly it was so slow, so I tried to install a new Windows, but I couldn't install it and gives me this error Windows cannot be installed to disk 0 partition 1 or 2 and when I press 'Windows cannot be installed to th

  • Why can't I get the First Citizens Bank account without waiting several minutes between screens?

    I have an account with First Citizens Bank. Online banking is a nightmare. It takes minutes between screens! My iPhone works in seconds. When I call the Bank they say they have the latest security technology and my Apple is probably not being updated

  • HP Pavilion p6-2302ea: compatibility

    Hello there are experts... I was wondering if this card, (if I had the PSU) would work in my computer ((HP Pavilion p6-2302ea)) http://www.GeForce.co.UK/hardware/desktop-GPUs/GeForce-GTX-590. Also, it is the power supply I found... http://www.cclonli

  • I got Cyberlink YouCam, but when I start to open the program is not available.

    I got Cyberlink YouCam, but when I start to open the program is not available. * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.