G62-34OUS press

Similar Questions

• G62-34OUS: reset the bios password Code: 76280850

  I get a msg instantly sayingenter psw or psw administrator on my code is: 76280850 plse help

  @hyplshlp_me

  Enter 69188296

  Kind regards

  DP - K

• Windows media player won't save playlist

  When I try to save a playlist, I get the following message:

  Windows Media Player has encountered a problem during the creation or saving of playlist.

  I used to be able to save a playlist.

  All the playlists that I had previously backed up are also no longer around, as I said me that there are no playlists.

  The convenience store said that there is no problem.

  I use Windows 7 on a HP G62-34ous laptop.

  Thanks for any help.

  Henry

  Hello

  Remember to make changes to the computer before this problem?

  Check your playlist of files stored in the music folder.

  Follow these steps:

  Method 1: run the troubleshooter.
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can try to rebuild the database of Windows Media Player.

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoftand then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

   

  Refer to this article:
  Windows Media Player playlist: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-playlist-frequently-asked-questions

• I am not able to uninstall a program

  I have a G62-34OUS. My iphone is not correctly synchronized with itunes, because apps won't conputer phone. Now computer says it does not recognize the device (iphone). It is a new problem. I was going to uninstall itunes and reinstall, but the computer does not uninstall the program.

  Go to Safe Mode and remove programs and features, uninstall QTime as well.

  Search by C:\ all the remains, that there will be a LOT, in the registry as well (if you feel safe with that).

  For a cleaning for this operation:

  

  If you can't mode safe do this way:

  

  

  Minimum has no internet.

  Network has internet.

  

  To exit the MODE without FAILURE, follow the same steps but not CHECKED, Safe Boot.

  

• need to press the pause button to start win7 on hp g62

  Hi I have a hp laptop g62 running win7 here we go whit my problem everytime I want to start the computer, I press the button start and then one as soon as I see the screen appears if I do not press break touch will turn off if I press any other keys it shuts back) 1 start 2) break wait a few minutes sign hp + press the ESC for the start menu appear and freeze wait a few minutes when I touch the button of sc prt next to break on the win7 keyboard lights up to a perfect session, the problem is that when I start the hpG62 so if you have any idea to help out who will be well accepted thank you in advance G.L

  Hello

  1. Since when are you facing the issue?

  2. have you made changes in the BIOS?

  I suggest try starting the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I also suggest you to consult the manual of the computer for any setting relating to Windows startup. You can also check with the manufacturer for known issues. The question facing the computer during startup of the State which is usually controlled by the BIOS. You can update the BIOS by visiting the manufacturer's Web site and check if it helps.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:

  Solve the Start Up and no list of Boot problems

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=CA&DLC=en&docName=c02798426&LC=en&product=4229834

  Hope this helps and provide us additional information for assistance.

• HP G62 keyboard key use normal function requires FN change. This can be changed?

  My HP G62 laptop keyboard function keys have uses of media by default such as jump, stop, louder, quieter, wireless power. I rarely feel like that at all. But I use the terminal emulation function keys. For this I have to hit FN all the time before use. This can be changed?

  Thank you!

  Hello

  Judgment of the laptop.  Tap away at f10, you begin to get into the bios menu and see if you have the option described in the link below.

  http://support.HP.com/us-en/document/c02035108

  If you do, do not forget to press f10, select Yes and press ENTER to save the change.

  Kind regards

  DP - K

  

• HP G62 - 340US Black screen on power on, no corresponding led error code

  Hey all,.

  Having a problem with my laptop HP G62-340US. The computer will continue to feed on, but the screen does not light, but the caps lock light has a constant slow continuous flashing. The indicator light next to the charging port is orange, as the light next to the wireless button. (There is no NumLock on the keyboard of a light)

  I looked at the link to HP support for this issue, located here:

  http://support.HP.com/us-en/document/c01443366

  But was unable to find my specific situation. Any help or idea would be greatly appricieated.

  Thank you!

  Try to start the machine without the battery and connected to the power adapter. Try to boot the machine with a single chip memory installed (if you have two). Try changing the location of the chip memory if you don't have one. Do a hard reset by removing the battery, power adapter, pressing the power button for 1 minute, reconnect the battery and power adapter, and then try again. If this does not work, you will have a video chip problem that would require a reflow (I know this isn't your model, but it shows you what may be involved):

  http://www.YouTube.com/watch?feature=player_detailpage & v = bnkQNmKauEc #t = 4S

  Good shops use pistols temperature controlled at worst and stations Infra red reflow for more accurate results.  The video was just to give you an idea what may be wrong.

  http://www.YouTube.com/watch?feature=player_detailpage & v = wEVv7p - JDc #t = 8 S

• HP - g62: bios set up locked

  Hello! I have a laptop hp - g62 and my BIOS set up has been locked after I entered 3 wrong passwords. the key is 73251517. Please help me it unlocked.

  Steps to follow:
  1. use the posted above unlock code to access the BIOS
  2 disable all passwords that are enabled
  3. If the request for current password - enter the unlock code
  4. for the new password, simply press the ENTER key
  5. repeat the same thing to check the password column.
  6. then exit the BIOS saving & output option to save the changes.
  
  Troubleshooting:
  Incase if the password does not work please try a Hard Reset as follows.
  
  1. power off the laptop
  
  2 disconnect the power adapter and remove the battery
  
  3 hold the Power button for 30 seconds
  
  4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad
  
  5. If now see you a password, please enter the same password I've shared before and press on enter
  
  Hope this helps, for other queries in response to the post and feel free to join us again
  
  * Click on the star of CONGRATULATIONS on the left to say thank you *.
  
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Laptop HP G62 - just stop job sound

  I don't know what happened, but there are about 30 minutes, the sound came out. I restarted my laptop and no sound.  I plugged my earpiece and still no sound.

  HP G62 laptop

  Windows Home Premium - 64-bit

  Hi Helen,

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp48001-48500/sp48281.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek audio device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP G62-340US: HP G62-340US

  Hello

  I have already ordered through HP backup diskettes and tried to recover my installation of Windows 7 by using the provided disks.

  Before this attempt at recovery facility, tried to use several iterations of Linux, so I formatted my HARD drive and recovery sector.

  The first disc seems to be fine and install correctly, but the 2nd is suspended from the installation of 12% and will not continue.

  If I try to boot without the inserted discs, I get the error: BOOTMGR is missing, press Ctrl + Alt + Delete to restart.

  In vain I tried reinstalling 3 times.

  Hi @PKuptz ,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP G62 - 340US Notebook and issues with fault of system recovery. Here is a linkto some troubleshooting tips.

  If this does not help, please use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately. Thank you.

• Wireless not working not not G62

  G62-225DX wireless light is amber.  I can make the blue, but always says capablity wireless off

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) disconnect the battery & adapter then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to the device manager then uninstall the wireless drivers and restart the machine and check if the light is on.

  (3) Please update the Bios & Wireless driver from the HP website.

  (4) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• HP G62 Shut Down and no power up

  Hello

  If I was working recently on my HP G62 and he stopped from nowhere. The battery is fully charged, so this isn't the problem. Once I returned home I plugged the charger and the light next to the plug does not light and the computer is completely insensitive. I tried everything I can think of. Someone at - it ideas? Thank you.

  remove the battery, other devices and the AC adapter... Press and hold the power button for 20 seconds... Plug the power adapter only and turn on the laptop...

• HP G62 371DX: help! Can not perform the system recovery

  HP G62-371DX
  A few months ago that my HP laptop was very slow, then crashed. I have factory reinstall using disks that I have ordered or purchased from HP. It was a time of recovery the first successful I used the recovery disks and after days of updates of the VICTORY, even was running Win 10, without a hiccup. Then, I received a few messages on the hard disk health and prominent failure. I decided to upgrade the laptop by buying a new battery and a HARD drive. When I tried to use system recovery discs to reinstall Windows 7 to factory State, it failed with an error:

  Copy the file fails
  From: F: \PRELOAD\BASE11. WIM
  TO: C: \RM\IMAGE| COMMODITIES11. WIM
  PRESS OK TO RETRY

  "" He then reloads the "Windows prepares your computer for first use" MORE AND MORE. Could there be something wrong with the recovery discs?

  99girl

  Hello

  You can try to see if the problem is with the recovery disks, would be to see if you can perform a new installation of Windows 10.

  As you mention that you recently update from Windows 7 to Windows 10, a hardware profile on your machine will be recorded by the activation servers

  Therefore, as long as the previous installation of Windows 10 had activated Ok after the upgrade to Windows 7, you can simply create the 10 Windows media on another PC and then perform a new installation as described in the guide on the following link.

  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• HP G62 plugged | Do not load.

  Product name: HP G62 Notebook PC
  Product number: WY887EA #ABV

  Operating system: Windows 7

  Error message:

  

  
  
  & im run start check batary its gain this error code: Q4GEWC-52A64Q-9XL03G-C0EQ03
  
  Please help me... 

  -tharu

  Hello

  I do not see one of the images you have uploaded again because they must be approved by a moderator before they show on the thread.

  In the meantime, try the following.

  Shut down the laptop, unplug the AC adapter and remove the main battery.  Regarding the Page 51 of your Maintenance & Service Guide, remove the RTC battery (cmos).

  Press and hold the power for 30 seconds to dispel any residual charge in the motherboard and then leave the laptop for 10 minutes.

  Re-connect the RTC battery, replace the cover, reinsert the battery, plug in the power adapter and start the laptop.

  Do you still have the same error?

  Kind regards

  DP - K

• HP g62-b18SA troubleshooting corrupt Bios

  It is time I need help from an expert, I've got HP g62-b18sa laptop i3, I discovered the bios as having failed because the laptop turns on but no display, CAPSLOCK flashes twice an intervel punctually 3 laptop restart itself, after reading several Forum, I got the phoenix tool and the latest bios of hp g62-b18sa, I flashed the bios portable came in DOS for 2 seconds, then turn off. I knew I was getting there, but the problem I have is that my hurt? Expert please help...

  Thank you very much

  Now it is fixed, even if HP rep.  not forbear, I always appreciate their effort, I knew I was doing something wrong initially, today I woke up, look to the computer laptop and thought selling ebay because he was sitting there during a month, but I just saidto me Deplus, give it one last try.

  I insert the USB key containing the bios, laptop power, usually I hold windows key + B for 5 seconds, but this time I decided to keep it for ever, the back boring screen came upward, but to my surprise it stay for 10 seconds I just press ENTER immediately. What a laptop computer joke went into the HP BIOS UPDATE SCREEN

  https://www.Flickr.com/photos/65438897@N06/12880548984/

  then Flash started process, infact I was more than happy.