HP G62 371DX: help! Can not perform the system recovery

Similar Questions

• G72-250us: will not perform the system recovery

  After completing the formatting and by copying all the files on the three disks that I made, the recovery program sees no bootable device when restarting. The original hard disk drive (320 gb) cooked and I replaced it with a 250 GB ssd. Ant help or explanation would be appreciated.

  Hi there @caper84,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the system recovery. I'll be happy to help you.

  I found a lot of documents for this problem. Here are some help.

  Troubleshooting problems of recovery HP System (Windows 7)

  System recovery can fail or display error messages (Windows 7 or Vista)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  Hello

  Can someone help on this

  CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  I just installed esx 4.0 update, one under vmware workstation and get this error

  Try to do this:

  Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)

• need help, can not attach the image file to my yahoo mail.

  need help, trying to compose e-mail... can not attach the image file to my yahoo mail... using firefox. Vista starter edition

  using 3 G hsdpa usb modem, model huawei E156G

  download stats is 0.00 KB its not not download, http://img337.imageshack.us/img337/2547/3ginterface.jpg

  the strange thing is that if I only download small file/pic as 50 KB download data passes through, but as 1 MB image file or more it will not pass and remained at 0.00 kb

  I tried to run administrator (always on the standard user account)---> cmd---> ipconfig/flushdns, still the same problem.

  Hi korgmeister,

  1 when was the last time it was working fine?

  2. do you have security software installed on the computer?

  3. are you able to access all Web sites?

  First of all, I suggest that you try to download the file with Windows internet explore.

  If you are able to download using Windows internet explore, then there may be a problem with the Firefox browser.

  Uninstall and reinstall Firefox browser and check.

  If you are facing a similar issue when you use Internet explore, then it may be Internet problem try to download some other file or document check if it works.

  Also contact your internet service provider to check if the connection side there is fine.

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NB500 - I can't do the system recovery

  Hello

  I got a nb500 Windows 7 starter and I cannot do a system recovery out-of-the-box.

  I tried "press 0 and power", the pc starts, but as long as I continue to press 0 nothing happens. When I release, it will continue to boot normally into windows. Also tried with f8, I can see the system recovery options, but there is no tool for HARD drive recovery there. I also used a toshiba recovery media Creator called program but when I start, it displays a message «there is no area of hard drive recovery»

  Any suggestions please?

  For some reason any there there no initial access to the recovery image.

  Either it is deleted or the partitions of HARD drive structure is changed and recovery tool cannot find the settings for the recovery image.
  Now, you have little problem. Recovery image installation will not work.

  You have two options:
  1 / you can try to install recovery disc original order of Toshiba - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  All readers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Re: How can I return the system recovery partition?

  I just used the cd to restore the system and on resetting my system to factory setting, but unfortunately, the system drive on the system recovery partition has been deleted.

  How will re - install the drive to restore system partition?

  Hello

  Do you mean the second Vista partition which contains the backup system files?

  This partition is hidden and usually after installing the OS from the Toshiba Recovery disk this partition must be re-created.

  I m 100% sure because I ve got my cell several times using the Toshiba Vista recovery DVDs and the hidden partition is created every time.

  Best regards

• Browser crash, restart on its own, can not do the system restore. Help!

  OK, so I tried EVERYTHING I know how to do, and some things I did research.

  Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

  I checked my drivers with the audit tool, nothing.

  I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

  Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

  I'm at my wits end!

  I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

  Please help :(

  Computer: Dell
  Intel Core 2 Duo 2 G of RAM, Windows XP Professional

  (For some reason, the police in your post is a very light gray!)

  Please transmit the full text of the error message.

  You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

  If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

  A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

  http://bertk.MVPs.org/html/srfail.html

  http://bertk.MVPs.org/html/symantecdoc1.html

  You should be able to disable your restarts automatically in this way:

  http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

  Finally, what is the status of this PC malware?

• Mini 210-2000 can not recover the system

  Hi, I have a 210-2000 mini hp, I did a system restore and the system crashed. I have no recovery discs and I'm stuck with what I need to do to reset the op sys, can u inbox very much my email with any help rec, im ped. He will go to the safe mode option but does not successfully start, all continuous loop again and again, many thnx, chinboy

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your laptop Nr series 210-2000 of Mini - see here for a guide to the location of this information or the list here.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• Can not access the system restore.

  After the removal of a virus, no visible icons on desktop except Mcafee on the toolbar at the bottom.  Was able to access the internet by clicking on Mcafee and then update.  When you click Start the only visible program is Mcafee.  Cannot see the control panel or Windows help/support or anything else.  "Run" is not available.

  Someone suggested that if I run the system restore, it could solve the problem.  But the problem is that I can't access it in the usual way.

  Hi Oishi Kuranosuke,

  ·         Are you able to access the system restore in safe mode?

  ·         You get the error message?

  System Restore can bring back the virus.

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• Very slow access to data on HP MIcroserver Gen8 warehouses. Can not change the system of booking resources with vSphere client.

  I did a clean install of ESXi 6 with HP supplied image (ESXi-6.0.0-2494585-HP-600.9.1.39-Mar2015).
  Access to and from the warehouses of data over network via vSphere Client (6.0.0 - 2502222) is very slow - ~ 10 Mbps (there are several hundred under ESXi 5.5)
  I suspect that ESXi 6 limited CPU resources used by the host to 230 MHz system.
  I can't change the settings 'System Resource Reservation"(unlike ESXi 5.5, where I can change and switch to Simple or advanced mode).

  Hey ArnisR,

  I finally found the problem. In the last 5.5 ESXi and version 6.0, they replaced the driver hpvsa (HP ISO vSphere!). With these drivers, I have known major problems with banks of data and, therefore, the controller B120i (RAID) of the Gen8 MicroServer HP.

  The problem is caused by the last (HP) ISO (from March);

  -Mar2015.iso 5.5.0 - Update2-2403361-HP - 550.9.2.27 VMware ESXi

  -Mar2015.iso 6.0.0 - 2494585-HP - 600.9.1.39 VMware ESXi

  I found out (because I had an older ISO), the ISO VMware ESXi 5.5.0-Update2-2068190-HP-5.77.3-Nov2014.iso works well! With this ISO standard, all performance issues disappeared.

  The difference between the ISO is as follows. The former ISO contains the driver of storage scsi-hpvsa 5.5.0 - 88OEM. ISO (s) of March come with new storage driver scsi-hpvsa 5.5.0 - 92OEM or scsi hpvsa - 5.5.0 - 90. These drivers are the cause of the problems in the controller of B120i!

  Installing ESXi 5.5 or 6 since last ISOs, you must manually install the old driver of storage (SCSI hpvsa - 5.5.0 - 88). I tested with the HPSA file scsi vib - 5.5.0 - 88OEM.550.0.0.1331820.x86_64.vib. Then I adjusted the ISO HP and equipped with the old driver. Now I can install ESXi 5.5 or 6 ISO (custom) of HP, which includes the former driver.

  I hope this helps!

• Help! Not clear the system specifications? Desktop compaq CQ5320Y... Want to upgrade CPU

  I have a Presario CQ5320Y desktop computer and I was looking at upgrading the processor to an AMD Phenom II X 4 965 Black Edition Deneb 3.4 GHz Quad-Core, in the specification system, it says the TDP is 95 Watts, but he has forward processer mentioned, who take 125 watts according to AMD, on the list of upgradable processor. I don't know if I blow on the motherboard or if it is designed to take this particular amoun just for this processor t?  Help!

  Here are the specifications of your desktop Compaq Presario CQ5320Y and its card mother M2N68-(Narra6). Based on the specifications, this model supports the following processors;

  Type of socket: AM3

  TDP: 95 watts

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  AMD Sempron 1xx (Sargas)

  It's very clear... the system supports a subset of the list up to a maximum of 95 watts. If the CPU is valued at more than 95 watts, it is not supported. In addition, "Black Edition" processors are not listed and therefore are not taken in charge.

  Please send Bravo

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Can not upgrade the system image on a flash drive

  I am running Windows 7 on an Optiplex 780 desktop computer.  I want to put the image of the system and a repair on a flash drive disc.  The choices seem to make it impossible.  Is there a way to do this?  Is this a bad idea?  If so, why?

  Thank you

  Jan

  Hi Jan,

  I'm not an expert on the subject by any means, so I could be wrong (and I hope someone will correct me if I am) but I don't think you can do this on a single USB.  I think, because both the iso image and the repair utility both must be bootable on USB port, it won't work.   At least, not easily.  There may be some company out there that offer this feature, but basic Windows Imaging and repair utilities, I don't think it will work.

  I did a google search and could not find someone announces a way to do it on a single USB key.  It could be simply the keywords I used.

  Mainly looking to have a simple USB for use in a large number of 780s installed?

  Todd