G7-2269wm Pavilion: update BIOS problems

Similar Questions

• Equium A210 - after update BIOS problems connect to MSN Live Messenger

  Hello

  I just installed the latest update of the Bios for my Equium A210, as has been the first time results attempted this \i watched carefully and everything seems to go correctly but the laptop is restarted, it beeps and showed a checksum error, I chose the option to reboot with 'Default settings'

  Since that I got problems to connect to MSN Live Messenger and I wondered if this might be something to do with the Bios Update, it is also possible to 'come back' to the old Bios somehow?

  Thank you
  Lee

  Hello

  your question isn't really a related problem of the machine. The "Checksum Error" is normal after each update BIOS since the checksum of the BIOS which consists the BIOS settings and the version of the BIOS is not correct due to a modified version of BIOS.
  So, the next time that you update your BIOS you will get a "BIOS checksum error" again. Worry not Don t, it s nothing serious.

  With regard to your Messenger:
  1. uninstall the Messenger
  2. download the latest version from the MSN site
  3. install a new
  4. have fun

  Welcomes ;)

• Startup after update BIOS problems

  I recently updated my Alienware Aurora R4 for Windows 10, that satisfies me, but I noticed that my fans have been reallt strong during startup and shutdown, and I had to reset manually in my Alienware Command Center application which caused irritation, so after minimal research, I saw that one of the proposed fixed has been update BIOS I foolishly thought would be a quick easy thing to try, so I updated the BIOS version A7 to A11 day because I was not aware of the flashing, which I realize now, I should certainly have done. In any case, the update seems to work fine, no freezes or crashes and I just restarted my computer and stop was normal. When he started upward again if, instead of start properly, he showed a 10 windows screen that says: "your computer encountered a problem and needs to restart" with an error that says INACCESSIBLE_BOOT_DEVICE. When it has rebooted, I went into my BIOS settings and that he made sure that my the first boot device has been "hard drive" (I have two discs SSD, a HARD drive, but they have never caused me problems before and nothing has been fixed when I took out the HARD drive without windows on it). So far, I restarted a bunch of times and tried everything I can think of. Any help would be appreciated! Thank you

  simple tips I gave to a member of the forum the other day (it is possible that the bios update is back your settings to "default"):

  • Check your bios, game sata AHCI controller
  • set the boot device as HDD #1
  • others had the chance in the bios, go to 'legacy boot.
  • remove all external usb devices for now accept keyboard and mouse back.

  Dell/Alienware advice says to disable secure boot...

• Tecra A9 - 11i: update Bios problem and AHCI works not

  Hello

  I have trouble to update BIOS for a Toshiba Tecra laptop A9 - 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  also if I can add a few questions:
  the function keys tdlo can't seem to work;
  led for the "FN" key light turns on when the key so assume the FN key works, but there is no response when you press on the "FN" key and one of the number keys on the f - I installed the software of the control unit as have been advised but this has not resolved.

  I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  any advice would be greatly appreciated, thank you very much.

  > I am having trouble updating BIOS for a Toshiba Tecra A9 - portable 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  This error message appears if you want to update a BIOS that is not compatible with your model of laptop.
  Toshiba pilot European page provides the BIOS 2.10Win for this model of laptop.
  If you have used certainly bad BIOS.

  > There is no response when you press on the "FN" key and one of the number keys f
  Controls of common modules the FN keys.
  If the issue should be resolved install common Modules v 6.06.00, 4.30.15 utilities
  Notes; You need to press FN + 1, 2, 3 etc. DON T press FN + F1 etc.

  > I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  First be sure that the AHCI is enabled in the BIOS.
  In addition, the Intel Storage Manager controls the AHCI so you should integrate the AHCI driver to CD Win XP as described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm
  or here
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Pavilion DV9008NR BIOS problem 8 32-bit Windows

  I have a mobile Pavilion DV9008NR older:

  RAM - 2 GB RAM

  CPU - Athlon Turion 64 x 2 TL-50 1.6 GHz

  Motherboard - Quanta 30B 9

  Chipset - NVIDIA GeForce 6150

  Southbridge - NVIDIA NForce 410/430 MCP

  BIOS HP F.43 22/03/2010

  -GPU of NVIDIA GeForce Go 6150 (UMA) (MS Bsic Disply C52 A.2 adapter graphics card

  This has been previously loaded with WinXP SP3 with nLite slipstreamed 1.42 to load SATA drivers.  He was previously the BIOS flashed to F.43 (latest version).

  He was 'clean' updated with Windows 8 Pro Upgrade after passing all the tests.

  After reboot, I got the standard HP/Phoenix BIOS screen with the usual guests for BIOS Setup and boot order.

  Every time after that, the guests disappeared and Win8 charge * fast * as usual.

  Feature to win 8 seems to be in good condition, and necessary Ricoh 5-in-1 and drivers NVIDIA coprocesser loading without difficulty.

  I went back to my old image of WinXP and loaded several times BIOS normally with and invites you.

  After reloading Win8, back to problems of any invites after the first reboot.

  Try or during the BIOS support is * not * enter you the BIOS or boot order Setup.

  It seems that somewhere Win8 is "anticipate" normal "flow" of the BIOS.

  I understand that Win8 has a feature to take control to prevent the takeover of boot sector malware.

  Is this what is happening?  (Which becomes a real problem with and may be necessary).

  Is this a bug in the BIOS, or

  Is there something else.

  Thank you ~.

  Just talked to the MS Support for something different and wondered about it.

  Obviously, on some machines, this is * normal * and is the result of the function "Secure Boot.

  The answer is... you need to use the 'restart' instead of 'Shut Down' to prepare the system to give the menu .

• P7 - 1050t CTO Pavilion: update BIOS on HP Pavilion p7 - 1050t CTO

  I have a Pavilion p7 - 1050t CTO Office I tried to get a 610 GT graphics card installed. (I have another question in the forum about this).  However, I wanted to ask a separate question on the BIOS.

  My computer came with Windows 7, but I recently upgraded to Windows 10. The BIOS is FRIEND V7.14 dated 11/08/2011. If I have a search for updates on p7 - 1050t and Windows 10 no updates are. However, if I search for updates with the help of HP using Windows 7 as OS, it is an update of the BIOS. Downloaded as .exe file and the given info says to use only with Windows 7.

  My question is, should I start in Windows 7 before you attempt the flash update and if it is successful, you who help to then restart in Windows 10 or can I try safely the flash in Windows 10.  I have the ability to dual-boot.

  Never mind.  I decided to just buy a new computer.

  Thank you.

• Qosmio G30 (PQG32E) - update BIOS problem

  I try to use this bios downloand - 20080424160754.zip support for laptop but when start telling me "this calculation is not supported" even help the firmware update.

  You will need to run the setup of BIOS with administrator rights. This can be easily done by right click on the setup and choose ' run as... '. ». There, you can choose if you run the file as a registered user or another (as administrator). If you set a password during the installation then you will have to type in the next screen, otherwise installation will continue and will update the BIOS.

  That's all...

  Welcome them

• Satellite A100 - update BIOS problem with phlashnt.sys and Vista 64

  I downloaded the upgrade of BIOS (file S10V600.exe) for my Toshiba Satellite A100-437 (PSAA8). When I try to launch it I get the answer:
  "Unable to load driver.
  ... \PHLASHNT. SYS
  ...
  This driver has been blocked form load.
  Error code: 1275 "
  (I rolled points instead of less interesting part of this message.

  My system is Vista Business 64 - bit SP1.

  I turned off User Account Control (in fact it the first thing I did after installing Vista ;)).
  And just to be safe, I also tried to right click on the S10V600.exe file and choose "Run as Administrator".
  I was using the admin account.

  Nothing did. Always the same window with the above message appeared.

  Any help would be appreciated!

  Concerning

  Maybe it's because you have installed Vista 64-bit?

  You may need to use XP or Vista 32 bit update of the BIOS.

• The HP Pavilion a6560z bios update

  I have a HP Pavilion a6560z. Product #: KZ851AV

  I tried to upgrade the processor of double base installed to a phenom x 4 9550, that my research shows is compatible as long as I have updated the bios. I am currently running bios version 5.14 20/06/2008. My problem is the OS original on this PC is Vista, I erased this OS and now run Win 7. I found an update of bios, version 5.49 but she said do not be there except if Vista is installed. Will install this bios brick Council since its desingned for vista?

  I can't enter the bios with the 9550 installed but it does not start in windows. The bios shows that it is a blah blah Phenom quad core, so at least he acknowledges that, but when I try to load windows it says "the file is maybe damaged. The file header checksum does not match the checksum calculated. "I read that had a memory problem and tried 8 different sticks, all with the same result, so I thought it was a bios problem. Anyway, any help on a version of bios, I can try without bricking advice would be greatly appreciated. Even if its for Vista that I am always willing to try. This pc is not much of value. Thank you.

  You are welcome.

  oldhppos wrote:
  

  Thanks for the quick response. Last question, if I could somehow reinstall Vista (system recovery is not an option) and then perform the bios update I was able to install windows 7 and then continue with the new (er) cpu?

  I checked the page download software & driver of the computer for an update of the BIOS for Vista and Vista 64-bit.  It seems not to be available.  You cannot use a retail BIOS update.  Where did you find a BIOS update?

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• HP Pavilion 500 series: updates Bios

  HI I was wondering tonight in my hp support center was a significant update of the Bios I was wondering if I could please get some advice on the question of whether it is a good idea to Bios if there is nothing wrong with the Bios in the first place.  Why should I update the Bios or should I not update the Bios for my hp Desktop.

  Thank you for your time and help

  In general, I agree with redshore.  I'm used to be of the opinion that if everything worked as planned, then leave it alone.  Since I use a HP ENVY laptop with Windows 8.1 one year, I noticed that the HP helper has done several updates that I probably have on my own, especially updates BIOS.  I don't know why there would be many updates to BIOS, so have to asuume engineers tried to fix a problem that had been reported.  As redshore, you always stand the risk of bricking the unit with BIOS update is bad and if you read the forums here, there seems to be more those happening.

  Some units now have a feature where a regime of BIOS recorvery is integrated, a good idea.  You might wise to explore your PC to see if the model you have this feature for a while where you might need.

• HP Pavilion 500-141ea: which recommended update BIOS to use?

  I have desktop PC HP Pavilion 500-141ea, bought 2014.03.27 not produce. D7D35EA #ABU.

  Manu of motherboard: MSI, model: 2AE0 (P0). Current BIOS is what FRIEND 80.35 dated the 2013.07.10

  Win 10 (64-bit)

  Online support suggests that this office should be updated to versions...

  (1) update BIOS of desktop PC for the consumer HP Rev.A 80.52 (SSID family ROM 2AE0) 5.1 MB 12 November 2015

  (2) HP Desktop system BIOS Update for the models of PC PC 2013 HP Pavilion 500 - axx (with a ROMA 2AE0 family) 80,51 Rev.A 2.9 MB November 4, 2015

  How will I know that I should use?

  Greetings,

  80.52 is the last and will include the previous update revisions.

  Download the update manually. Do not use the HPSA.

  See you soon!

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• Pavilion dv9660ev: ftp site updated BIOS for HP dv9660ev

  Hi, my laptop is a HP Pavilion dv9660ev.

  I try to find the file executable sp # .exe on the ftp site of HP for the BIOS update. He did for years, I've updated the BIOS and I don't remember the exact file.

  My Information System shows:

  HP Pavilion dv9500 NoteBook PC model system

  SKU KC214EA #B1A system

  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz, 2001 Mhz, 2 Lossnay, 2 logical processors

  BIOS Version/Date Hewlett-Packard F.5A, 22/03/2010

  SMBIOS Version 2.4

  Embedded Controller Version 255.255

  My version is F.5A 22/03/2010;

  The only thing I've found so far is sp48024.exe F.5A REV: has the entry date in April 5, 2010.

  Do you know if it is the version of the BIOS right for me?

  Please do not send me to tune. He shows me no update BIOS, since I already have the latest version on.

  Thanks in advance.

  Hello

  sp48024 is the latest bios for your laptop, but I think that you already have it.  Although the posting date for this update is closed April 5, 2010, the file AVCs to sp48024 on the link below tells the bios is in fact as of March 22, 2010 - see the DetailFileInformation field.

  http://FTP.HP.com/pub/SoftPaq/sp48001-48500/sp48024.CVA

  Kind regards

  DP - K

• HP Pavilion XE763 BIOS update Release Notes?

  Work on the following machine:

  HP Pavilion XE763 with Phoenix BIOS revision of Basic 4.06 2.02 07/14/00

  ... and considering the BIOS firmware with this update:

  Dunidar wrote:

  I understand that you are looking for documentation of the HP Pavilion Cognac BIOS update. Unfortunately, the only information I can find on this update is located on the page I linked to you.

  I found the release notes.  Where everyone is looking to get this info, it's here:

  Technical release notes:
  ------------------------

  2.09 14/04/01
  (1) adds the control On / Off of FAN3 for rev b/j. H
  (2) support Simple Boot Flag

  2.10 20/04/01
  (1) changing the report option of CPU frequency for unlocked CPU (update of the standard rev 2.0)
  (2) edit the table above 1 GHz CPU speed

  2.11 07/19/01
  (1) display ID of FDI in manufacturing
  (2) fix error modem Cheetah under WinXP

  ... so it's not like they have added support for the USB boot.