Gallery of images or the Lightbox that works for DW CS6?

Similar Questions

• Loading of the connected battery, do not... (found the solution that worked for my Dell Inspiron

  Well, the charger is plugged, but he says not charging. What happened twice. I would have thought bad battery or bad, but fortunately the first charger, that it took place just after buying a new hard drive. I did a hard reset on the battery and that worked.

  Now, it happened again. I tried resetting the regular battery, but that didn't work. I tried to uninstall the device and reinstall... did not work either.

  Curiously, what worked was this:

  I have had about 38% battery remaining. I unplugged the laptop computer power cord and the wall.

  I removed the dough. Computer has been cut.

  I wiped the connectors of the battery with a clean cloth, several times.

  I put the dough back in and turned the laptop on battery only.

  I plugged the power cord into the side of the laptop, and then into the wall outlet.

  Immediately, the laptop began to charge again!

  I don't know why it worked. Maybe some grumpy off he can know. When I tried to reset the battery, I turned off the computer before you take out the battery. Then he went out. Laptop with power cord is plugged in and powered it. Then stop down and placed battery. I turned her back... but nothing...

  It may have to do to have the laptop when you remove the battery, or place the power cord in back, or could be simply wipe cloth?

  Hi thelights007,

  Please share the system model and the installed operating system. The error "plugged not charging" can be caused for a variety of reasons as defective adapter or a faulty load Board.

  Try the below mentioned steps that can help fix the problem. Procedure for running flea power is:

  • Turning the system off.
  • Disconnect all external devices (printers, external hard drives, flash drives) of the computer.
  • Disconnect the power adapter and remove the battery.
  • Press and hold the power button for 20 to 30 seconds to release the residual charge of the laptop.
  • Reconnect the battery and the AC adapter.
  • Once the system is turned on and booted properly, replace the battery. Check whether you still receive the error.
  • Start the system BIOS by pressing the F2 key on the Dell logo screen when you turn on the system.
  • Press the F9 key to load the BIOS default settings. When finished, press the F10 key to save and exit. System will reboot. Check to see if the error is still there.
  • Try to wiggle the cable of the AC adapter / CC and check if it makes a difference.
  If it still does not work, spare parts may be necessary.

  I hope this helps. Please share the findings.

• Newbie, adding an image in the body that responds by using HTML

  I'm sorry for the newbie question, I understand the basics like the title of centering, "BOLD" tags and can build a basic joomla website that looks half decent, but I ran into problems trying to help the boss man clean her eBay store ads. I bought a model that is responsive and looks pretty decent, but I would like to add a header (an image of width) above the navigation bar that resizes with mobile phone. Tablet or desktop computer. I have no idea and tried several ways but eBay is limited on javascripts and style off-site so he needs to be in HTML. I'll post the HTML that works and who is authorized by eBay for a semi nice list. Can someone help me please how to get an image with full-width above the menu? Thank you

  -newbie to Dreamweaver

  In CSS, give the image a width of 100% and turn it into a level similar to block element

  IMG.responsive {}

  display: block;

  Width: 100%;

  }

  and the HTML code:

  src class = "reactive" = "myimage.png" alt ="" > "

• I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and noticed that Mozilla has a built-in phishing and virus program. Do I need another antivirus program and if so, the one that works best with Firefox?

  I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and see that Firefox has a program's built-in phishing and viruses. Do I need a program additional anti-malware? If so, the one that works best with Firefox? Seems put more you on these things the you have more trouble.

  The anti-phishing protection and malware that Firefox uses checks against a list of websites that have been reported to contain a form of malware and then alerts you. Firefox itself does not scan files to see if they contain viruses/malware. You still need a form any anti-virus and anti-malware protection. You must also use a firewall.

  As for which is better, you are likely to get many different answers, it's a topic that generates a lot of discussion. A product one person loves will be hated by someone else. I use Microsoft Security Essentials as well as Windows Firewall.

• Only windows 7 can set the image of the user that appears in the start menu you can not change it. True or false?

  Is true or false. Only windows 7 can set the image of the user that appears in the start menu you can not change it.

  Set to false.

  Type the user accounts in the start search box.

  Press ENTER.

  Select change your image.

  Browse the picture than what you want.

• Is the program that works with Wordpress?

  Is the program that works with Wordpress?

  Please take a look at the construction with Adobe Dreamweaver CC WordPress sites

• I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I don't mean the software on the computer that works and not being able to get it insta on wreck

  I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I wouldn't destroy the software on the computer that works and not being able to get installed it on the new computer. Help, please.

  Tony

  To reinstall the software, you will need the serial number. Please see this link:quickly find your serial number.

  Guinot

• How can I transform my ipad app within an app that works for the iPad and iPhone?

  I built an ipad with the DPS application. But now my client wants to have the same content on iphone. How can I transform my ipad app within an app that works for the iPad and iPhone?  Is this possible without creating a new application App Builder? Thanks for your replies.

  You must create a new instance of the DPS App Builder application. Select iPhone and iPad. If you use the same mobileprovision files (or mobile layout updated of the files of the bases on the same ID App), it is considered that a version update of the application itself.

  You will need create sheets separated for the iPhone. folios iPad do not appear in the library of iPhone. See Digital Publishing Suite help | Creating content DPS for iPhones.

• Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  What software you want to install?

  If it is old software that comes on a DVD, then install from the DVD and enter the serial number when prompted.

  Otherwise, you can download applications and install - this document provides more details. You can not require a serial number but must sign the software with an Adobe ID, which has the appropriate right.

• All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?

  All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?

  I also have Creative Suite 5, which I think is delivered with a set of Adobe Fonts. These are all licensed?

  A license?  Yes, but not necessarily for the web. Some licenses permit use on paper or images but not the web.

  • Custom Web fonts

  For legal reasons don't assume that you can use any font you want on the web. Fonts are protected by the intellectual property laws in the same way that software is protected against illegal copy, modify or distribute. In other words, an owner of fonts can of course, saying "you can use my font, but you cannot change it, you can not reproduce and you may not distribute." On the web, which is a deal breaker, because you must be able to do all three.

  These font families are common to most Windows/Mac systems.

  • Battery CSS Fonts: Web Safe and family of Web fonts with HTML and CSS code.

  Adobe Edge and TypeKit Web fonts are licensed for use on the web.

  • Free fonts, web fonts | Download the free trial version Adobe Edge Web Fonts
  • Typekit

  Nancy O.

• The tolerance setting works for the "Convert anchor point tool"? Are there other ways?

  Hello
  I wonder if the setting "tolerance"in the preferences only works for the arrow tools?» I put it to 8 pixels and it seems OK for these tools, but when I use the tool 'Convert Anchor' point it is incredible difficult to hit a point for me. It seems that I have to hit a point exactly one pixel, which is hard with a screen high resolution.
  My PC keeps beeping all the time and I'm getting crazy on this subject...
  It seems that the framework of tolerance doesn't work here, I'm right? There are other parameters that could help me to work with this tool?

  Sorry if this is the kind of a beginner question, I have much experience with PS and LR, but not so much with Illustrator (and I couldn't find anything useful in the internet).

  Thank you
  Raschko

  I agree, it is sometimes difficult to click on the sweet spot. Here are 3 proposals:

  1. Pay attention to the cursor icon. This will change when you are on a point anchor or direction.
  2. Try to turn on 'bearings commented. They can be a nuisance, but they are sometimes useful.
  3. Use the button "convert" on the Options bar. They may take a little longer but they are full-proof, moreover, you can convert or remove several selected points simultaneously using this method.

  

• I just bought photoshop elements 13, but now, when I wasn't downlowd, I m shore - it's for my iMac. What shal I do to fix that works for my iMac?

  I just bought photoshop elements 13, but now, when I wasn't downlowd, I m shore - it's for my iMac. What shal I do to fix that works for my iMac?

  If you need the Mac version, download the trial version for the Mac and use the serial number, have you already activate it.

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

• iPad flashing constant Air... can't even thug off the coast.  Upgrade the software, but worked for a while.  Can't do anything else.

  iPad constant Air flashing... cannot even turn off.  Upgrade the software, but worked for a while.  Can't do anything now.

  MY husband fixed this problem by pressing power and home buttons.  Duh...

• I bought the products that goes for a year and I put the redemption code, but when I install programs, it says always that I only have a month's trial. That's happened?

  I bought the products that goes for a year and I put the redemption code, but when I install programs, it says always that I only have a month's trial. That's happened?

  Hello

  Please see redemption code help

  If you get the prompt in the first instance, please see the following help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Can I download the current that pay for the GI license, and I used in Microsoft with a Mac OS - MAC OS?

  Can I download the current that pay for the GI license, and I used in Microsoft with a Mac OS - MAC OS?

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare