Games showing in zoom

I tried to correct my games are in zoom mode and I can't fix it, I have everything else to a normal size but the game apps

This phenomenon occurs with all your applications of game or just one?

Tags: iPad

Similar Questions

everything on the page is shifted to the right how do I get it back? Only the left side of games shows.

When I go to play a game that shows that the left side of the game, I used arrows to try to move it to the wire but nothing dragging does not. help please

Hi DaniDEWITT,

1. what game you're trying to read?

2. do you have the game installed or play online on your computer?

3. don't you make changes on the computer before this problem?

You can try to change the screen resolution settings and check if it helps.

Change your screen resolution

Get the best display on your monitor

Reference: fixing game performance problems

Hope the helps of information.
Please post back and we do know.

Why not a game show upward into the Games folder more?

On the first computer, I installed Windows 7 on (there are two facilities), The Elder Scrolls IV: Oblivion appeared in the games on its own folder. After the death of the mother of the computer, I installed Windows 7 32 - bit on a new computer, andoversight were not included in the games. I had to add manually, and it would download album cover nor does not endorse the links. I am now on a third computer, Windows 7 64-bit and oblivion did not appear in the Games folder (although his predecessor,Morrowind, a).

Y at - there a rhyme or reason to this, and then I manually fix the problem?

EDIT: actually, I have a similar question on another game. The game itself did not appear, but the expansion pack has.

Hello

Most of the new games generally automatically appear in the Games Explorer folder when you install on Windows 7. However, some previous games may not appear
in the Games folder, and in this case, you will need to manually add the shortcut of the game in the Games folder.

Additional information:
http://Windows.Microsoft.com/en-us/Windows7/working-with-the-Games-folder

Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think.

IGI2 game shows an error "mss32.dll."

I install the game complitlly and when to start the game televised a mistake "mss32.dll."

Hi arvindxyz,
1. Did you the latest changes on the computer?
2. What is you receive the exact error message?
3. How you installed the game on the computer? Is using the installation of the game disc or download online?
Method 1

Refer to the article below and try the steps mentioned to check if background programs installed on the computer is the origin of the problem.

Perform a clean boot to determine if background programs interfere with your game or program

http://support.Microsoft.com/kb/331796

Method 2

If the previous step fails, then try uninstalling and reinstalling the game, check if it helps.

How to change or remove a program in Windows XP

http://support.Microsoft.com/kb/307895

Method 3

If the steps above don't then confirm your request in the codemasters forums.

http://community.Codemasters.com/Forum/

Game shows, "invalid file version" error message unable to play the game.

original title: game to hide a search?

error, "invalid file version ' screen lights up whenever I have try 2 start a game ive been playin 4 more than a month." It's on the desktop and also in the folder, it was created in. I do not understand why im 2 cannot play this game after being so long 4 fine. Wat could be the deal, .pickle? It's vista on laptop

Hello

1. don't you make changes to your computer, after which the issue started?
2. what game are you talking about?

Follow these steps and check if the problem persists.

Step 1:

Right-click on the game and 'Run as administrator' and check if it makes a difference.

Step 2:

Reinstall the game and see if the problem still occurs.

http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

Step 3:

If the problem occurred recently, perform the System Restore to the point that your game was functioning normally.

See also:

The problems of the game performance

Always when I want to install game show me the message?

The version of this file is not compatible with the version of Windows you are using. You check the computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.

What this knowledge?

Usually, you get this message if an older game still uses a 16-bit installation program ("setup.exe"). These installers will be running on 32-bit Windows systems, but not on 64-bit. The game can work in such a case, but you can not install it. If you have a second computer with a 32-bit operating system, you might be able to install on an external hard drive, then use this HD to play the game on 64-bit (only compatible with games that require no registry entry - pre - XP or the beginning of the era press releases XP is good candidates).

MSN free online game shows no videos

As I type, Im guessing that the 8.1 is in the process if the download. Can't find tht either. Im having trouble playing MSN free online games. The screen which should allow me to play now says NO VIDEO. This can be corrected?

Try to run, type: DXDIAG run Direct x.

Also, open the device mgr, locate & extend display adapt, R.click on the material.

Select: update driver

Once through, you can power-scroll devices, system, windows updates

If necessary

Also, make sure that youre firewall is checked for IE, add if it is not listed in the exceptions

How to get a 'slide show' effect (zoom in or out)?

Thanks a lot for helping me here:
http://forums.Adobe.com/message/3114535#3114535
I'm not producing high-quality videos!
I really need to do the following in one of my projects:
http://www.YouTube.com/watch?v=BbnE2-l6NxU
As you can see the images in this slideshow is ether zoom in or zoom out. I need to do the same for images/videos
I don't know that Premiere Pro takes care of everything. Can you guys help me?
I use Windows Vista and 32 bits a Premiere Pro CS4
Thanks in advance.

Yes, PrPro can make very nice Zooms (and pans). In the effect controls panel, with your photo or video selected in the timeline panel, the low pirouette the motion effect fixed. You will see Motion > Position (Pan) and the movement > scale (Zoom). Place the CTI (current time marker) on the first frame of the Clip, and then click the small Animation "chronometer", to add a keyframe. Move to the location where your want to Zoom to complete, then click Add keyframe (the small circle between the two arrowheads. With the ITC on this picture-key, adjust the scale in function. Repeat steps.

Good luck

Hunt

Old games has not transferred to the new device

Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

dlb104 wrote:

Games on the old iphone and iPad has not transferred to the new iPhone and new ipad. Games show in Game Center, but didn't open at all or open to basic, start over.

Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

The question of the compatibility of the game-related questions

Respected Sir/Madam,

I am Naveen Saha of Gujarat, in India. I have a laptop HP envy-6 1003tx sleekbook. I installed windows 8 Professional on my laptop. I have a game GTA 4 I want to install and play on my laptop and the forum of windows it is shown that this game is compatible with windows 8, but the game shows that your system is not compatible during the installation. Requirements minimum for the game is graphics card 512 MB, 1 GB of ram and 16 GB of hard drive space and all that is in my laptop but it has a compatibility problem with windows 8. How to start the game on my laptop or make it compatible with windows 8, please help and answer me soon.

Thank you

Naveen Saha

Hello NAVEENENVY.

I found a YouTube video that covers installing the game on Windows 8 by using the compatibility and disk mode. Here is the link. This is the method you tried to install the game using the styling? If Yes, what is the error you receive? If this isn't what you tried, let me know the result.

I'll keep an eye out for your answer. I wish you a nice day!

Scroll and zoom behaves badly

Just last week my laptop started acting weird. When I scroll down with my mouse, there's not down, just scrolls save. On the drop-down menus that I must use my arrows, the menu will not open. On games when I Zoom out, he zoomed back right, will not stay outside. When I try to move the volume rocker continues to go up. When I try to adjust the color, tint etc on the photos the slide bar keeps sliding back by itself. I use a logitech wireless mouse. The same one I used for a year without problem. Help?

Hello

Have you tried another mouse on this system and that mouse on another system?

=====================================================

If this is not the perhaps of mice a system restore to before it started can help.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
=====================================================

If the above didn't help:

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

------------------------------------------------

Refresh the driver stack:

Control Panel mouse configuration and devices - right click on the mouse - pointing UNINSTALL - REBOOT

If mouse drivers 3rd party update or reinstall.

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Development of 2d - performance (much slower than 9000 9500) games

Not really a player, I don't think it will be very useful, and it's entirely anecdotal, so I would not base your decisions on that, but maybe this will help you.

Regarding the "power" of the various models of Blackberry, you could search the Internet, looking for the processor that is used as an indicator of the power. BBs of Java didn't have (at least as I understand it) a graphics processor, then all the image processing is done on the main processor.

You will find if you look at this page:

http://en.Wikipedia.org/wiki/BlackBerry_Bold

that the 9000 has a 624 MHz Marvell Tavor PXA930, while you are looking for here:

http://en.Wikipedia.org/wiki/BlackBerry_Storm

your Storm has a dual core CPU 400 MHz and ARM9 274 MHz ARM11

Using the cycles in comparison, it would mean for me during the development of a game, it'll be quicker on the 9000 the storm, because I believe that the treatment of Java is in fact all is done on a single processor, if your painting will be restricted to the 400 Mhz on the storm.

My experience is "BOLD" seems faster than the storm in general, but I actually always put that down to the bigger screen being slower to draw.

In terms of processing power, the phone slower that I think you could develop to is in fact the storm, but actually I would not develop for it. It has a system with a somewhat strange interface because of the screen push. I would ignore this device and just concentrate on OS 5.0 devices. To this end, the slower device is probably the Blackberry Curve 8520, with a 512 MHz processor. I would get one of these for your tests. Also, the (screen size, keyboard) form factor is shared by a large number of other phones.

In general terms, my brief experience with treatment of the game showed me that if you want your game to go fast, be updated too little screen that you can. So use 'regions' in your paint method to specify exactly which pieces on the screen should be updated. In my tests, I tried to have a cursor to move around the screen using the trackpad. If I moved the slider and then redisplays the whole screen, the performance has been extremely slow. But if I just painted on the slider of the region it's in, and he painted in the apartment that he had moved, I got a slider action much, much more flexible.

Try to solve the 6 number 1 target android game using oracle (sql or pl/sql)

Gurus and mentors/friends,.

Today, had little space in my time to work, so I tried to reproduce an android game called "6 numbers between 1-target" in oracle.

All that I need help from you all is to make more effective/robust and garnish with a little bit of awesomeness (preferable in SQL ? I don't)

Please note that if you are busy, skip this question.

------------------------------------------------------------------------------------------------

Game goes like this:

-------------------------

computer gives you only 6 numbers...

for example: 50,9,5,8,6,7

And using mathematics as operators '+','-',' *', ' / ' we need to get a result comparable to 292. (this number 292 is also given by computer..)

All that we need is the formula apt for 292 out of these 6 numbers (pouvez/do not use all these numbers) using these operators (you can use them without the restrictions of many times where they are used and also the decimal places are truncated.).

So solutions can be: 50 * 6 - 8 + 5/9/7, 50 * 6 - 8 or 50 * 6 - 8 + 5/7/9 etc... (multiple answers are possible, all boiling down giving 292)

I just tried to write it this way, but its time consuming because levels rise. So I thought that I would be the dice in this forum for the best solution. (or maybe suggestions to improve my solution below)

------------------------------------

create table demo (str varchar2 (100), number of val);

-----------------------------------

DECLARE
l_str VARCHAR2 (100);
l_result NUMBER;
BEGIN
EXECUTE IMMEDIATE 'demo truncate table ';

WHILE (TRUE) LOOP - I know it's wrong, but it's the game after all and I needed iterations to go until I get to a solution.
BEGIN
FOR rec
IN (WITH operators AS
(Op SELECT COLUMN_VALUE
TABLE (sys.odcivarchar2list ('+',)
'-',
'*',
'/'))
ORDER OF DBMS_RANDOM. VALUE ()),
t AS
(SELECT SUBSTR (SYS_CONNECT_BY_PATH (letter, ','), 2))
Word
FROM (SELECT LEVEL LVL,
REGEXP_SUBSTR (str,
'[^,]+',
1,
LEVEL)
LETTER
FROM (SELECT '7,8,5,50,9,6' FROM DUAL str) t
CONNECT BY LEVEL < =.
REGEXP_COUNT (STR, ',') + 1).
WHERE = 6
CONNECT BY NOCYCLE lvl! = lvl PRIOR),
TT AS
(SELECT REGEXP_SUBSTR (Word,
'[^,]*',
1,
1)
col1,
(SELECT val
FROM (SELECT val op
Operators
ORDER OF DBMS_RANDOM. VALUE ())
WHERE ROWNUM = 1)
OP1,
REGEXP_SUBSTR (Word,
'[^,]*',
1,
3)
col2,
(SELECT val
FROM (SELECT val op
Operators
ORDER OF DBMS_RANDOM. VALUE ())
WHERE ROWNUM = 1)
OP2,
REGEXP_SUBSTR (Word,
'[^,]*',
1,
5)
col3,
(SELECT val
FROM (SELECT val op
Operators
ORDER OF DBMS_RANDOM. VALUE ())
WHERE ROWNUM = 1)
OP3,
REGEXP_SUBSTR (Word,
'[^,]*',
1,
7)
COL4,
(SELECT val
FROM (SELECT val op
Operators
ORDER OF DBMS_RANDOM. VALUE ())
WHERE ROWNUM = 1)
OP4,
REGEXP_SUBSTR (Word,
'[^,]*',
1,
9)
col5,
(SELECT val
FROM (SELECT val op
Operators
ORDER OF DBMS_RANDOM. VALUE ())
WHERE ROWNUM = 1)
OP5,
REGEXP_SUBSTR (Word,
'[^,]*',
1,
11)
col6
T)
SELECT col1
|| OP1
|| col2
|| OP2
|| COL3
|| OP3
|| COL4
|| OP4
|| col5
|| OP5
|| col6
formula
TT
ORDER OF DBMS_RANDOM. VALUE ()) LOOP
EXECUTE IMMEDIATE ' begin: result: = ' | Rec.Formula | '; end; »
With the HELP OF THE l_result;

l_str: = rec.formula;

INSERT INTO demo
VALUES (rec.formula, TRUNC (l_result));
-COMMIT;

END LOOP;
END;

IF (l_result = 292) THEN
EXIT;
END IF;
END LOOP;
END;
/

--------------------------------------------------------------------------------------------------

Thanks in advance! (even for those who have opened this question )

See you soon,.

Manik.

EDIT: this solution is not all of the possible options. Go here for a shorter, faster, more complete solution.

Here's a solution that includes parentheses. It follows the rules of "game show" as odie_63 said: the result of an intermediate calculation must be a positive integer, and each integer entry can be used at most once.

There is some unnecessary parentheses, but they do not change the logic or the defined solution.

It works in about 70 seconds on my PC.

WITH input AS (
  select '50,9,8,7,6,5' nums, 292 targ from dual
), nums AS (
  select power(2, row_number() over(order by num desc) - 1) bits, num
  FROM (
    SELECT to_number(regexp_substr(nums,'[^,]+',1,ROWNUM)) num
    FROM input
    CONNECT BY to_number(regexp_substr(nums,'[^,]+',1,ROWNUM)) IS NOT NULL
  )
), ma_1 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, NULL, num, num, num||NULL, 0 FROM nums
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  n.op, n.num,
  decode(n.op,'+', o.cumul_num + n.num, o.cumul_num * n.num),
  o.str || n.op || n.num,
  1
  FROM ma_1 o
  JOIN (
    SELECT * FROM nums,
    (SELECT '*' op FROM dual UNION ALL SELECT '+' FROM dual)
  ) n
  ON nvl(o.op,n.op) = n.op
  AND n.num < o.num
), ds_2 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, 0, cumul_num, str, num_parens FROM ma_1
  where bits < 63 or cumul_num = (select targ from input)
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op, n.num,
  decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
  END,
  o.str || decode(o.op,'+','-','/') || n.num,
  1
  FROM ds_2 o
  JOIN nums n
  ON o.op IS NOT NULL
  and n.num > o.num
  AND bitand(o.BITS, n.BITS) = 0
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
    = trunc(decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num))
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num) > 0
), fmt_3 as (
  SELECT BITS, op, cumul_num num, cumul_num,
  case when num_parens = 1 and bits < 63 then '(' end
    || str ||
    case when num_parens = 1 and bits < 63 then ')' end str,
  num_parens
  FROM ds_2, input
  where bits < 63 or cumul_num = targ
), ma_4 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, num, cumul_num, str, num_parens FROM fmt_3
  UNION ALL
  SELECT
  (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op,
  n.num,
  decode(o.op,'*', o.cumul_num + n.num, o.cumul_num * n.num),
  o.str || decode(o.op,'*','+','*') || n.str,
  least(o.num_parens+1, 2)
  FROM ma_4 o
  JOIN fmt_3 n
  on o.num_parens > 0
  and o.op = nvl(n.op,o.op)
  AND n.num < o.num
  and bitand(o.bits, n.bits) = 0
), ds_5 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, 0, cumul_num, str, num_parens FROM ma_4
  where bits < 63 or cumul_num = (select targ from input)
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op, n.num,
  decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num)
  END,
  o.str || decode(o.op,'*','-','/') || n.str,
  least(o.num_parens+1, 2)
  FROM ds_5 o
  JOIN fmt_3 n
  on o.num_parens > 0
  and o.op = nvl(n.op,o.op)
  AND n.num > o.num
  and bitand(o.bits, n.bits) = 0
  AND decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num)
    = trunc(decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num))
  AND decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num) > 0
), fmt_6 as (
  SELECT BITS, op, cumul_num num, cumul_num,
  case when num_parens = 2 and bits < 63 then '(' end
    || str ||
    case when num_parens = 2 and bits < 63 then ')' end str,
  num_parens
  FROM ds_5, input
  where bits < 63 or cumul_num = targ
), ma_7 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, num, cumul_num, str, num_parens FROM fmt_6
  UNION ALL
  SELECT
  (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op,
  n.num,
  decode(o.op,'+', o.cumul_num + n.num, o.cumul_num * n.num),
  o.str || o.op || n.str,
  least(o.num_parens+1, 3)
  FROM ma_7 o
  JOIN fmt_6 n
  on o.num_parens > 1
  and n.num_parens != 1
  and o.op = nvl(n.op,o.op)
  AND n.num < o.num
  and bitand(o.bits, n.bits) = 0
), ds_8 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, 0, cumul_num, str, num_parens FROM ma_7
  where bits < 63 or cumul_num = (select targ from input)
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op, n.num,
  decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
  END,
  o.str || decode(o.op,'+','-','/') || n.str,
  least(o.num_parens+1, 3)
  FROM ds_8 o
  JOIN fmt_6 n
  on o.num_parens > 1
  and n.num_parens != 1
  and o.op = nvl(n.op,o.op)
  AND n.num > o.num
  and bitand(o.bits, n.bits) = 0
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
    = trunc(decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num))
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num) > 0
), fmt_9 as (
  SELECT BITS, op, cumul_num num, cumul_num,
  case when num_parens = 3 and bits < 63 then '(' end
    || str ||
    case when num_parens = 3 and bits < 63 then ')' end str,
  num_parens
  FROM ds_8, input
  where bits < 63 or cumul_num = targ
), ma_10 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, num, cumul_num, str, num_parens FROM fmt_9
  UNION ALL
  SELECT
  (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op,
  n.num,
  decode(o.op,'*', o.cumul_num + n.num, o.cumul_num * n.num),
  o.str || decode(o.op,'*','+','*') || n.str,
  least(o.num_parens+1, 4)
  FROM ma_10 o
  JOIN fmt_9 n
  on o.num_parens > 2
  and n.num_parens != 2
  and o.op = nvl(n.op,o.op)
  AND n.num < o.num
  and bitand(o.bits, n.bits) = 0
), ds_11 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, 0, cumul_num, str, num_parens FROM ma_10
  where bits < 63 or cumul_num = (select targ from input)
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op, n.num,
  decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num)
  END,
  o.str || decode(o.op,'*','-','/') || n.str,
  least(o.num_parens+1, 4)
  FROM ds_11 o
  JOIN fmt_9 n
  on o.num_parens > 2
  and n.num_parens != 2
  and o.op = nvl(n.op,o.op)
  AND n.num > o.num
  and bitand(o.bits, n.bits) = 0
  AND decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num)
    = trunc(decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num))
  AND decode(o.op, '*', o.cumul_num - n.num, o.cumul_num / n.num) > 0
), fmt_12 as (
  SELECT BITS, op, cumul_num num, cumul_num,
  case when num_parens = 4 and bits < 63 then '(' end
    || str ||
    case when num_parens = 4 and bits < 63 then ')' end str,
  num_parens
  FROM ds_11, input
  where bits < 63 or cumul_num = targ
), ma_13 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, num, cumul_num, str, num_parens FROM fmt_12
  UNION ALL
  SELECT
  (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op,
  n.num,
  decode(o.op,'+', o.cumul_num + n.num, o.cumul_num * n.num),
  o.str || o.op || n.str,
  least(o.num_parens+1, 5)
  FROM ma_13 o
  JOIN fmt_12 n
  on o.num_parens > 3
  and n.num_parens != 3
  and o.op = nvl(n.op,o.op)
  AND n.num < o.num
  and bitand(o.bits, n.bits) = 0
), ds_14 (BITS, op, num, cumul_num, str, num_parens) AS (
  SELECT BITS, op, 0, cumul_num, str, num_parens FROM ma_13
  where bits < 63 or cumul_num = (select targ from input)
  UNION ALL
  SELECT (o.BITS + n.BITS) - BitAND(o.BITS, n.BITS),
  o.op, n.num,
  decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
  END,
  o.str || decode(o.op,'+','-','/') || n.str,
  least(o.num_parens+1, 5)
  FROM ds_14 o
  JOIN fmt_12 n
  on o.num_parens > 3
  and n.num_parens != 3
  and o.op = nvl(n.op,o.op)
  AND n.num > o.num
  and bitand(o.bits, n.bits) = 0
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num)
    = trunc(decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num))
  AND decode(o.op, '+', o.cumul_num - n.num, o.cumul_num / n.num) > 0
)
select str, dbms_aw.eval_number(str) check_result
from (
  select str from ds_14, input
  where cumul_num = targ
)
order by str;

STR	CHECK_RESULT
((((65) + 8) 9)-50)	292
((((86) + 9) 5) + 7)	292
((((86)-5) 7)-9)	292
(((505) + 8) 7/6)-9	292
(((509) + 6) 5/8) + 7	292
(((50+8) * 5) + 9-7)	292
+ ((505) (7 6))	292
((50*6) + 8-7-9)	292
((50*6)-8)	292
((50 + 6-5-8) * 7)-9	292
((50+7) * 5) + 9 + 6-8	292
((50 + 8-7) * 6)-5-9	292
((50 + 8-9) * 6) + 5-7	292
((50 + 9 + 6-8) * 5) + 7	292
((50 + 9 + 7-6) * 5)-8	292
(8 * 6 * 5) + 50 + 9 - 7	292

How to zoom works when I click on a button or clickbox?

HI (I am using Captivate 5.5)
What I currently have is a screenshot of anti-virus software and I want the user to click on specific parts of the image to activate zoom to see the text better. I would like to have several buttons for the user to click on to active the zoom box, and then hide the previous zoom boxes, so there are no charges zoomed in areas on the screen at the same time or clickboxes, isn't possible? I tried to use the hide/show on a single click to to display the zoom feature, but the zoom has already loaded with the slide and when I try to hide the zoom feature again the area zoomed in don't disappear, I also tried to put a white box above the zoom area, but he always comes through... help!
What I want is:
Clickbox or button - click - zoom feature appears and zooms in
Button - clicks of the user different area - the previous zoom disappears - new area zoom and zoom or Clickbox workloads
etc...

Hello

You use the Zoom object for this? It will be difficult. One possibility is to use the micro-navigation, put different objects in the zoom on different places on the timeline and navigate to this specific image when the button is clicked with Assign rdcmndGotoFrameAndResume with x, where x is the number of this framework. Seems very complicated. It is not possible to hide/show a Zoom object as is the case for most other objects.

Maybe it could work with the widget Image Zoom by Yves Riel: http://blog.flash-factor.com/widgets/image-zoom-widget/ but I have to admit that I did not.

Another solution would be to create your own effect of zoom with effects and attempt to control it with actions.

Lilybiri

Zoom tool has changed in CS5

In previous versions, you can use the zoom tool to draw a rectangle which would then show the zoomed area. I noticed that you can't draw a rectangle because as soon as you use the zoom image zoom tool in CS5.
Things changed in CS5?
Thank you
Ian

If you want that in cs5, select the zoom tool and deselect scrubby zoom.

MTSTUNER

.

Games showing in zoom

Similar Questions

Maybe you are looking for