IGI2 game shows an error "mss32.dll."

Similar Questions

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Error Kernelbase.dll while playing the game of Multipllayer

  Original title: Im getting an error kernelbase.dll due to a multiplayer game and all the solutions are to identify with different user. How to fix the game and the corrupted user profile?

  Im getting an error kernelbase.dll due to a multiplayer game and all the solutions are to identify with different user. How can I connect under a different name? Have created the new user, I have no idea how to connect with that. And then they say "Rename profile problem", what does it means? And what you can "copy your on your user that corrupted data." If she's not slove, repeat the steps with the default folder too "means. I use Windows 7 HomeGroup.

  Original title: user profile

  Basically, you are asking how to fix a corrupted user profile.  Google for "corrupt user profile" and you will get a wealth of information.  But here's the Microsoft article on how to do...

  "Fix a corrupted user profile.

  <>http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile >

  HTH,

  JW

• How can I fix error d3d9.dll

  How can I fix the error d3d9.dll

  Hi Antony,

  1. when exactly did you D3D9. DLL error?

  2 have had any changes made to the computer before the show?

  3. what version of Windows is installed on your computer?

  D3d9.dll problems result in one way or another by a problem with Microsoft DirectX.

  The file d3d9.dll and d3d10_1.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3d9.dll errors usually only appear when you use these programs.

  Important note: Do not download the file d3d9.dll individually any "DLL download site."

  Note: If you have already downloaded the d3d9.dll in these places to download DLL, remove it from everywhere where put you it and continue with the following steps.

  Step 1:

  Restart your computer if you have not yet.

  D3d9.dll error may be a stroke of luck and a simple restart could clear up completely.

  Note: the latest version of DirectX should be installed no matter if you are on Windows 7, Windows Vista or Windows XP. Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  Step 2:

  Install the update from the link below and check if the problem is resolved.

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Step 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 4:

  System File Checker Scan SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• lack mss32.dll try to reinstall the program

  When I start the game it warns me that mss32.dll is missing I should try to reinstall the program again. is there any way to get this lack "I have now" without changing my window?

  Hello

  ·         The game you are trying to open?

  ·         If it works much earlier?

  ·         Did you make any changes before the show?

  ·         Have you installed the new driver for the graphics card?

  Method 1:

  It seems that the file may be part of a sound card driver. I suggest that you reinstall your sound card driver and then eventually try to reinstall Call of Duty 4. This should install it the missing files that may not have installed the first time with each program.

  See the links below for more information on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 2:

  If you try to play Age of Empires III or Dungeon Siege II then follows a link and check if it helps:

  http://support.Microsoft.com/kb/911203

  Method 3:

  If the method above does not resolve the problem, I suggest you do the system restore.

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  For more information, see the article:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• error d3dx9_32.dll

  model: HP 15-d000sia
  I try to install 2 a game after installation I couldn't open it, a box pops up saying lack of d3dx9_32.DLL
  Please help me!

  Hi @israelio

  I understand that you found an error in dll missing after installation, and you try to run a game. I'm happy to help you.

  The dll error you describe is due to a problem with your installation of directx.

  Take a look at this page which is after a little research:

  How to difficulty D3dx9_32.dll not found or missing errors - about.com

• Dell Inspiron with Windows 7, error d3dx9_33.dll trying to play Civ 4

  I'm looking for a way to get my civ 4 game to work on my new computer is a dell inspiron 546 s with windows 7 is there a way to do this easily

  * original title - I just buying a dell insperon he has windows 7 on it and the desire to play my civ 4 game on it but get error d3dx9_33.dll is missing or not found tried reinstaalling, as he suggested same problem guard passes. *

  Have you tried the forum of civilization? Also look into compatibility mode.

  Compatibility mode - make sure to run older programs in this version of Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Learn how to use the Mode of Windows 7 compatibility with legacy applications
  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How do I resolve error 'usp10.dll' resolve

  Dear Sir.

  My mistake of a computer (missing "usp10.dll") mess show.how I can solve the provlem.

  Operating system XP service PAC 3

  Shahin

  Hi Safiqul,

  Usp10.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the error usp10.dll is a key piece of information that will be useful while solving the problem.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Answer please if you have any questions.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• DVD/CD not loading automatically and a message mss32.dll for another program

  Questions:

  • Not automatically loading since the system recovery DVD/CD
  • ... Error message program file mss32.dll is missing when I click to pull up of typing exercises "Mavis Beacon" on my computer

  • After facing problems of recovery system... is to say, make backup CDs, reloading the original recovery disc that came with my computer system, I noticed that I have problems with 1) get any cd or dvd to work somehow when I put them in the computer. They are no longer automatically load as they did. I can't burn or copy anything, etc. ; and, (2) when I try to pull up my 'Mavis Beacon' type program, which also came preloaded... I get a missing mss32.dll file or something. I need to know how to fix these things myself, just in case where they happen. can someone help me... thanx in advance!

    I tried to use the feature 'Fix It' MS provides for troubleshooting of problems so that the feature troubleshooting already on the computer... niether has worked or solved my problem! I looked at some of the suggestions that have been given in the forum, but they seemed only suggest you do what was mentioned in the emergency program on my computer that did not work. I tried uninstalling the file through my CD/DVD Device Manager and have then reinstall automatically when I rebooted the computer... and it gave no results either.

  Hi kmannamk,

  1. do you have an error when retrieving the system?
  2. that you get an error when trying to burn or copy anything?

  It seems that the typing exercises are defective, to solve this problem we recommend that you reinstall the program.

  Step 1: Check if the CD/DVD device is enabled in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. make sure that CD/DVD device is enabled.
  c. make the appropriate changes, and then restart the computer.

  NOTE: BIOS change incorrect settings will not allow your computer to run properly. If you are not comfortable changing the settings, then contact the manufacturer of the help system.

  Step 2: If the problem persists, manually add the CD/DVD device and check the result. To do this, try the following steps:
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. in the list of objects, expand CD/DVD players, right click on the sub element and click on uninstall.
  c. click on my computer in the list and click Action, click Add new hardware.
  d. follow the instructions in the wizard to add the CD/DVD device and restart the computer.

  See using Add Hardware
  See also: http://support.microsoft.com/kb/321641
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• several errors at startup related to the file missing error rasman.dll

  several errors at startup related to the file missing error rasman.dll

  Hello

  1 did you changes to the computer before the show?
  2. What is the exact error message or error code?

  I suggest you perform the clean boot and check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  It will be useful.

• error message "Error in Script" line 30, tank: 3, error: error loading DLL, Code: 0, URL: file.

  whenever I boot, I get the following line to the 'Script error' 30, tank: 3, error: error loading DLL, Code: 0, URL: file...

  Question - what should I do to solve this problem.

  Secondly - I installed a new program that came with a new camera.  I have loaded the software but when I try to open it states the following:
  "The program cannot start because MSVCP71.dll absent from your computer."  Try reinstalling the program to fix the problem.

  I reloaded the program several times and this message continues to invent whenever I try to run the software.

  I believe that these two issues are related.

  I would appreciate help.

  Thank you

  Charlie

  Hi Charlie,

  one) you get error script on Internet explorer?

  (b) what is the brand and model of the camera?

  (c) what is the name of the camera program?

  (d) were there any changes on the computer before the show?

  Follow these methods and check if that helps:

  Method 1: You can get the script error if there is a problem with the JavaScript or VBScript code on the Web site you are looking at. Sometimes a script error can be caused by an error during the download of a Web page, but more often it is an error in the Web page itself.

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  Also refer to this article: http://windows.microsoft.com/en-in/windows7/what-should-you-do-about-internet-explorer-script-errors

  Method 2: Msvcp71.dll is a Microsoft C, C ++ Runtime library, and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System. It is quite possible that there is something wrong with the installation of the camera program files.

  Step 1: The MSVCR71.dll Version comes from Microsoft Visual C++ .NET 2003 with Microsoft .NET Framework 1.1.

  http://support.Microsoft.com/kb/326922

  Try download and install the latest Microsoft Visual C++ 2010 redistributable package of this link and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Step 2: If the error disappear not even once you have reinstalled the application causing the error, then download the DLL from the Internet or copy it from another computer with the same configuration as yours in the directory of the program, which requires that the file.

  Note: you can also copy the file to the C:\Windows\System32\

  After you have copied the file try to open the device program and check.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.