Gateway requirements

Similar Questions

• Programmatic access to project Gateway requirements

  Dear LabVIEW community!

  It's a way to access the data in the gateway requirements by programming project, LabVIEW? To get, for example, the ID of the requirements in the proper format (as can be done in the gateway requirements himself--right-click on the obligation and select copy to-> LabVIEW Description reference)?

  Thanks in advance!

  Hello

  Unfortunately, to access the data of the gateway requirements in LabVIEW is not possible at this time.

  Thank you

• TestStand and Gateway requirements

  Hello

  It is more a question of RG, but there is no RG area to post.

  I have a Word Document that defines the requirements for a test sequence.

  Needs are covered by the two

  (1) LabVIEW VI

  (2) sequence TestStand.

  What I want to do is to see what is my coverage of the coverage of Word Documents.

  I noticed that when I added the TestStand sequence for my gateway Req project, all entries in the TS document generates a "derived demand".

  Is there a way to turn off?

  I want to connect my word document to a place in the test sequence and to say that this is where I cover that is recording data. I don't want to link my TS sequence with a results file.

  The annoying bit is when I look at the view analisys even if my Word Document is covered at 100% yet there are a number of requirements derived from the sequence of TS discoveries.

  Thanks for the tips!

  Maciej

  Maciej salvation,

  answer your questions:

  (1) connecting a TestStand sequence to a Word Document causes RG generate the "derivatives"requirement for each of the elements (steps or sequences) TS.»
  I would like to cut this robot. I'm not interested in the requirements derived in this scenario.

  "You can turn that they derive ar requirements shown by selecting view" derived from the requirements in main menu of th.  This will hide the requirements derived from the view and in reports that you generate.

  (2) Assembly of the desired structure

  If you link the arrows of cover in the Middle, you can create a relationship "or", as shown below.  In this case, a requirement is considered covered when it is covered by one of the 2 on the documents.  The configuration that you currently expects that all THE accompanying documents have coverage for each requirement.

  

  For more information, see the topic combining covering links in aid of the gateway requirements for more information.

  Let me know if you have any other questions!

• Relative paths of the gateway requirements

  So I am using requirements gateway for a little while now and I are one of several developers to use, or one of the many people now the documents it contains.  We keep the Gateway project control requirements of source code with the documents and the project code in that respect.

  We met one of the problems was that this gateway requirements is configured as an absolute path if the path is not under the gateway requirements project path.

  Let's say I have a directory like this structure.

  \Requirements Gateway\ Q:\Project\Project [x]

  [X] Q:\Project\Project [x] \Project Documentation\

  Q:\Project\Project [x] Code\ [x] \Project

  When you add documents to the gateway requirements project it will add them however travel.  So if another developer gets the source on the V:\ drive control then it can not find documents or code.  We found that you can manually change the path of the documents to have a relative path by editing the .rqtf file manually in a text editor.

  Finally the problem.  This solution does not work for code TestStand or paths of LabVIEW code... why?  If I replace "[x] [x] Code\ \Project Q:\Project\Project"with"[, \Project[x] Code\ ' in the .rqtf project file and then open the project, it will say file not found.  The file may have been moved or deleted.  But all the documents that are configured to have relative paths work fine.

  Can someone tell me how to get access roads-related work for LabVIEW and TestStand code in Gateway requirements?  Thank you.

  Hooovahh-

  It is currently a lack of functionality for our types of TestStand and LabVIEW OR gateway 1.1 requirements. This is something that will probably fix us in the next version or Gateway requirements.

  Thank you for that bring to our attention.

• Using gateway requirements with LabVIEW classes

  Does anyone know how to get the gateway requirements NOR read the coverage information of documentation contained in a class of LabVIEW (.lvclass)?

  Requirements gateway seems to load the content of the fine documentation of screws, controls, .llb, .lvlib, .lvproj etc., but not .lvclass? My LabVIEW crash out when I try to bridge point requirements to a project with .lvclass files!

  If this cannot be done then it is a great way to add coverage of the needs information (you know, the field "covers: ID") in the properties of the class, or something close to class perhaps, this gateway requirements can read?

  Thoric-

  I believe that gateway requirements should be able to trace of LabVIEW Classes also covers long classes are added to a LabVIEW project and requirements gateway is configured in order to study the LabVIEW project. Here is a very primitive example that I restored from files in the directories of the prescriptions and example LabVIEW gateway.

  I hope this helps.

• Gateway requirements referring to the part of Id from step 2

  Hello

  After posting part1

  http://forums.NI.com/T5/NI-TestStand/Requierements-gateway-referencing-to-step-s-ID/TD-p/2271796

  I have a few questions on NIRG futher.

  The referenceing to NI TestStand works pretty well now, especially if the sequencefile has no appeal in sequence to the other sequencefiles.

  If there is one that you will be have undefined requirements of cource. Is not critical, but it seems quite bad in the sight of management if there is something undefined. Each manager will both ask "why?"

  If you don't like to explain it, you say the name of the corresponding sequencefile NIRG. Just see the screenshoot.

  

  Now I'm wondering is it possible to exchange a variable from one type to another?

  With this feature, I'm able to do a model NIRG, where the user must enter only the files in the project editor and the editor of Type do not care.

  Concerning

  Jürgen

  Hi J_dodek,

  Unfortunately, items of a type XML currently supports only plain text or regular expressions.  You cannot use variables or any script for this field.  However, you can get the functionality you're looking for by using a filter.  If you can send a sample project using your custom types, I will consider a possible way to filter cover links that do not target a requirement

• Gateway requirements customize advanced door Type

  Hello, I'm in trouble with R-Gateway... first of all I haven't found a Board of R-gateway to post my question, sorry

  I started to adopt the "DOORS linking example" as follows:

  -added a LabVIEW project as a document with [Covers: DesignReq], PAST.

  -Adding attributes to DOORS connecting example Req-tag (which must be used instead of the Type of the object) and Req - No (which should be used instead of ReqID)

  Now 3 documents in R-Bridge configuration: DTH of DOORS, DOORS SDS and LabVIEW project

  -changed the type object Type SDS = requirement and requirement ID = ReqID Req-flag = "O" with ID = Req - No. requirement, PASSED

  -changed the type DRS of object Type = requirement and requirement ID = ReqID Req-flag = "O" with requirement ID = Req - No, FAILURE (DTH requirement status from "covered" to "not covered" Note: the DOORS objects are related with links "refers to")

  Try narrowing... pedal return

  -changed the type DRS of object Type = obligation to Req-Flag = "O", SUCCESS

  -changed the type DRS of requirement ID = ReqID = Req - No ID requirement, FAILURE: coverage lost again.

  I can't understand the problem. Hoping there is someone out there who is familiar with the bridge R I look forward to hearing from you soon =)

  Thanks in advance

  RZM

  RZM,

  If I understand your message, I think that what you have to do is add an extra attribute to the Req - no requirement and specify its id as the label. Then you can use $l (it's an L) to display the label instead of $i to view the identifier. Please see the screenshot below:

  

  With this configuration, your graphical view will look something like this:

  

  Simply remove the "ID: $i and label:"and all that appears is SRS - x.

• How can you generate a list of unmet needs in a customized in NO Gateway requirements report?

  I am creating a custom report that lists the requirements that are covered (i.e., a traceability matrix) and also a list of unmet needs.  I think I have the first part figured out, but I can't understand how to generate a list of unmet, preferably by document.  I would like to see something like this:

  2 needs not covered

  2.1 documentA

  Covered requirements: 5

  -Req3

  -Req5

  -Req10

  -Req12

  -Req13

  Does anyone know how to do this?

  Also, is there any documentation on what are the various data elements?  (For example, what is a "requirement of the sheet"?)

  Thank you!

  Tom

  Hi Tom,

  I have attached a modified version of the example of Word which comes with requirements 1.1 gateway. In this sample project, I have reproduced the traceability matrix report and a slight modification to only show requirements discovered at the end of the report. Please note that this is not a complete solution, but it should be enough to help you move forward on the right track.

• API for the gateway requirements

  Hello

  When you look in the bin folder of NIRG there is nirg.tlb.

  It is a public library and is it possible to remote NIRG?

  Concerning

  Jürgen

  Hi Al,.

  This morning I spent some time in the COM interface (.tbl) which comes with nirg.

  After a few tries, I got it running in this way that I liked. Open, Reload and save the project.

  It works well. Only at the end, I don't know the right parameter value.

  It would be well on future versions there is a description of the short parameter.

  Concerning

  Jürgen

• Requirements Gateway - objects on the front panel

  Hello

  I'm about to start using the gateway requirements and I have a few questions to help me go...

  1. If I create a vi on a machine without RG installed and then move it to a machine with the Receiver General installed, will be always recognized tags?

  2 - RG recognize the syntax [covers XX] if it's on a façade and not the block diagram?

  Thanks for your help.

  Darren.

  I know a little RG.

  1. Yes.

  2 RG will scan the three areas of a VI for references: VI Description, control/indicator Description and diagram commentary (free labels). That's why he won't see a reference on the front panel (for example data text or text of the label or a caption).

• is a necessary to connect to the database Cache IS transparent gateway?

  Hello
  
  I was invited by one of our developers how to create a connection of its Oracle 11.2 to SQL Server and also InterSystems Cache database ' databases without having to use the transparent gateway?
  
  Is it possible, and if so, how can it be done?
  
  (Thanks in advance)

  Hello
  You say - "I guess that means that the Oracle database gateway is FREE (SE)" but to make the point again - the gateway of database for ODBC (DG4ODBC) is free. The other gateways require a license.
  If you are running on Windows, then most of the Microsoft's ODBC drivers are free or included as part of other products, so you don't need to pay for them, and many providers of database non-Oracle also include a pilot ODCB as part of the product, once again there is no need to pay for anything else to use DG4ODBC for example MySQL.

  To interface with a Database Cache, you can use Dg4ODBC but you must provide the ODBC driver. There is not a "dedicated" for this product database gateway. That's why we provide the DG4ODBC which can interface with a non-Oracle or data store database for which an ODBC driver is available.
  This available on My Oracle Support note contains information on the installation on different plates-formes-notes

  Note to master note.1083703.1 for the Oracle Gateway products

  Kind regards
  Mike

• LVUTF-> RequirementID shows only not in the ATML report

  I use requriements gateway and I wanted to use the ATML report out the UnitTest framework in my project.

  The issue I'm facing is when I run the UnitTest framework on my draft report is ATML does not contain the elements of RequirementID.

  I belieave I configured it straight and I don't understand why it doesn't work.

  Gateway requirements comes with an example of using the ATML UTF report. When I run the test in the sample project, RequirementID tags appear.

  I have enclosed a snapshot of one of my 8 unit tests in my module: to show that I have set the RequirementID field in UTF configuration.

  However... I have no chance, and the report does not have the RequirementID.

  Any help would be appreciated.

  Maciej

  Ok

  Problem between the keyboard and the Chair.

  If you go in the project preferences, test infrastructure unit, there is an option to select additional details in the tests of success, failure, and error.

  It is not checked by default.

  When I selected the option the ATML now cointains tags RequirementID I wanted.

• DG4ODBC to MSSQL Server and multiple databases

  Hi all

  Is it possible, when you connect Oracle to MS SQL server using DG4ODBC, to access different databases to this database? I tried to use the following syntact: select 'databasename '. "' TableName ' of table@MSSQL, but it does not work. For your reference, the databaselink works properly; Select 'tablename' of table@MSSQL gives good results.

  Thank you in advance for your help!

  Tom

  Yes, it is, but it should be a dedicated dg4odbc set up for each database MS SQL Server, that you want to access.

  Remember that each init file gateway requires an entry dedicated to the listener.ora file, in the tnsnames.ora and as well a dedicated entrance odbc.ini that specifies what database you want to connect.

  -Klaus

• Requirements 1.1 gateway cannot detect images in a word document

  Dear developers,

  The following problem occurred, while I was with gateway 1.1 requirements (Build 586)-> I inserted pictures in several formats in an exmple word file, but there was no sign of them in one of the views. The type of default 'word' has been used.

  

  You have an idea, how can I use the images in a word file?

  K. L.

  K.L.-

  You must activate the variable with the Images of the document setting up the project. When this option is enabled, the images are displayed in a pop-up window when you select the requirement in the management view.

  

  I hope this helps.

• II Gateway and TS-Intermidiate file requirements

  Hello

  I asked in this thread on the TestStand Intermidiate file.

  http://forums.NI.com/T5/NI-TestStand/requirements-gateway-TS-Intermidiate-file/m-p/2288998/highlight...

  At the time I write my own Tango intermediate file generator. To make it simple as possible, that I tried to draw the OR s her. I couldn't explain one of the attributes is: "canGenerateResults" in the step element tag.

  Is it possible to tell me how this value of the indicator is created?

  Concerning

  Jürgen

  Hi Daniel,.

  what you have is the attribute: recordResult.
  but the word 'sequence' reported the flag at right.
  Attribute: canGenerateResults ist created by.
  Sequnence properties-> tab: general-> the box off the result recoding for all stages.

  Concerning

  Jürgen