gauge power and display on the screen...

Similar Questions

• Image taken from server and display on the screen

  Hello Sir

  I'm new to the development of Blackberry, I use a webservie that returns the image in . Its a Web service written in DotNet Framework. I'm trying to convert bytes it so that I can conver bitmap and use it on the screen.

  I think I'm losing a date when the dat of conversion to Byte]

  connection_for_image image_connection = new connection_for_image();

  raw Byte [] = image_connection.get (URL);
  Dialog.Alert ("control returned 1 size =" + raw.length);
             
  try {}
                    
  Bitmap_image bitmap = new Bitmap (Bitmap.ROWWISE_MONOCHROME, 50, 50, gross);
                      
  Image BitmapField = new BitmapField (bitmap_image);
  Add (image);
                   
  } catch (Exception e) {}
  Dialog.Alert ("catch" + e.getMessage ());
  }

  After running the above code a few image is displayed in black and white, but even once, is not the image I am downloading from webservice.

  In the connection class that I'm parsing the data type in bytes using following code

  data Byte [] = null;

  I have String = d.MySplitName (content, "",")<>
  data = i.getBytes ();
  return data;

  Here, I'm a little frustrated because you don't seem to listen to what I tell you.

  "How to convert byte [] Base64Binary data.

  "Is there a way by which I can convert the base64Binary byte data.

  Please read carefully what I suggested that you make.  You should be able to determine the raw bytes that has your Web server.  The Web Service then converts it to text he sends you.  You should be able to convert it to bytes that were originally used.  You have enough information in this thread already do.  Please confirm this part of the treatment before you do anything else.

  "then use these data to display the byte [] in the bitmap file.

  That's where I think your problem is.  Look at the code I gave you in the last post.  But you will need to know the format of the raw bytes that are stored on your Web server and sent to you.  Then find a way to convert them into a Bitmap image on the device - method may depend on how the bytes are stored on your Web server.  It might be that the bytes that are sent to you are already in a Blackberry bitmap format, but I doubt it.

  So please make sure that you have correctly found the bytes of the raw image.  When this is correct, you know that your network stuff working.  Once you've done that, then you have to find a way to convert the bytes of the Bitmap image.

  If the byte [] is supported by JSR 172 is not relevant at this stage.

• Why pdf files not open in firefox and display on the screen?

  I'm unable to view pdf files in firefox and do Explorer as default. Why is this happening?

  This link shows you the settings that should be checked - https://support.mozilla.com/kb/Opening+PDF+files+within+Firefox

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• Loginoff, save your settings and Windows stops no display on the screen, every time I stop my Windows XP Professional SP3

  Hi all

  Hi Patfaucher1974,
   
  Your question seems incomplete. When you say "Windows is no display on the screen stop" means that you do not get the screen that says "closing Windows"?
  -You are unable to shut down your computer?
  -If so, can remind you to make changes to your computer between the calendar when things worked fine and now?
   

  Try the steps listed in the article below and check if that helps you:

  Your computer stops responding when you try to shut down in Windows XP

  Additional reference on:

  Advanced Troubleshooting for shutdown problems in Windows XP

• Turn off the display on the screen for the next meetings

  I have several MX300s TC7.3.6 running.

  They are all registered to CUCM and TMS as the alternative directory server.

  Can you tell me how to disable the meetings to come, displayed on the screen?

  The MX800s have a field in CUCM for OSD - Todays booking power, but not the MX300s

  THX,

  Rob

  The command is there for the MX800 won't say he supports it, the TodaysBooking configuration is supported only on older codecs that perform TC software.  It isn't a way to disable the OSD indicator for future meetings, your only option is to use a custom wallpaper that will eliminate some parts of the OSD as the clock and the list of upcoming meetings.

• KDF-55wf655 video mode still displayed on the screen

  I have a problem with our kdf-50wf655 where the video mode is always displayed on the screen.  Watching cable TV, it displays a list box "video 7' in the upper left corner. We had this TV for 10 years and this question popped up just for a reason any.

  I tried to watch some of the tv settings and turn them off and who does not.  I also went through other video modes and it does the same thing.  Does anyone else have this problem and fix?

  Hi mcpcp99,

  Welcome to the community of Sony!

  Try resetting the TV to its default settings. You can follow the steps below:

  1 turn on the TV. While holding down the reset on the remote control.

  2. press the POWER button on the TV. (The TV puts off, then power on.)

  3. release the RESET button.

  NOTE: The TV reset Resets all your custom default factory settings.

  Thank you!

  Jerome

  If my post answered your question, please mark it as "accept as a Solution.

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Qosmio F30-112 - small strips and dots on the screen

  Hello

  I need help, my laptop (Qosmio F30 - 112) have a problem.
  When I started it scratch on the screen and flashes.
  Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
  I checked it on the Device Manager NVIDIA GForce with a yellow mark.
  I tried to uninstall it but nothings happened.

  Please some body help me what to do in this case?

  And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

  Thank you
  rtmasagca

  Hello

  Have you tried to install or update the display driver?
  Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

  Otherwise, it could be a GPU problem.
  This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

  If Yes, then it s certainly a GPU problem.
  In this case, only the replacement of the motherboard might help.
  Also, upgrade is not possible.

• Satellite L670D-103 - nothing displayed on the screen

  Hello, please help, my laptop does not start!

  When I push button 'ON', there is nothing displayed on the screen, but the fan is running, the lights are on except the HARD drive light. The motherboard seems to be ok then, but there screen is always black! For your information, my HARD drive is nearly full (319, 8 GB / 320 GB) and I did not create Toshiba recovery disc

  What is a screen or an OS problem, and how can I fix it? The screen display depends on the OS to start and the screen won't work if the OS is recovered?

  Thank you
  Concerning

  Hey,.

  Theoretically, it could be a malfunction of the card Mother poster to find this point connect an external monitor to your laptop and if the internal display is faulty, you should see something on the screen. Otherwise another part is at the origin of the problem.

  This problem has nothing to do with the HARD drive. Even without disc HARD is installed you should see the screen of the Toshiba BIOS at least.

  Why you have not created the Toshiba Recovery disk?
  The recovery disc can restore the factory settings on the HARD drive, but in this case it will not help you. Recovery disk is only software (Windows).

• 2010 15 "MacBook Pro unexpected stops and defects of the screen

  As stated in the subject, I have a 2010 15 "MacBook Pro that runs on OSX Mavericks.

  I have experienced unexpected stops and, more recently, the screen glitches (see photos).

  I also have this message since Photoshop at a secure startup: "Photoshop gave up waiting for the assessment of the display driver.  Improvements using graphics hardware have been disabled.  Check the Web site of the manufacturer for the latest version of the software.

  Please review my images for more information.  I made a Starter course and managed to back up my computer (took 6 hours).  Now, I just need to fix it.

  PROPOSED ISSUE: I think I'll have problems of GPU and is forced to remove my components materials dust or replace certain parts.

  Please let me know if you have any ideas or solutions that could make me run!  Thank you!

  

  I suggest to install "El Capitan", a clean install, in this case, could be better

• Powers on my computer, but no image is displayed on the screen.

  Powers on my computer, but no image is displayed on the screen.

  You forgot to tell us something about your computer. You hear any sound from the computer at all once you turn it on, it? It sounds like the hard drive turning upward? You see absolutely nothing on the screen? Be more descriptive and include information about your computer (computer desk/computer laptop/brand-model), his age, and precisely what happens when you turn on the computer. It is a hardware problem and narrowing of component that failed is not possible without more information from you.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• objects and text on the screen appear to be "stretched" horizontally.

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  find manual for my screen... it is AOC model 2219V1.  As I have explained, I tried to change the resolution.  When I change the resolution on my side of the computer, then my husbands is affected.   There is something that I realized that I can't re-create or find...  You have any other suggestions... Thanks for your help.   What would happen if I reload windows software... do you think all the settings back to the original settings?  If I reload windows, will I lose the documents and files on my computer?

  I do not see where you said you tried to change the resolution.  You have changed the DPI, but it's different than to change the resolution (although can be connected to ALSO change the resolution.)

  The resolution is not independent - that is when you change the resolution of the screen of the user, it is on this size for all users of the computer.  Your original problem was:

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  This means that you are using a large non-ecran on a screen resolution and screen is allowing it to fill the entire screen.

  You say you have the AOC 2219V1 monitor)<-- linked="" to="" there)="" and="" according="" to="" the="" specifications="" on="" that="" web="" page,="" the="" resolution="" you="" want="" to="" set="" the="" monitor="" at="" is:="" 1680="" x="" 1050="" @="">

  So, in your case, if you have the correct driver for your video card installed * and * says video card supports widescreen resolutions (what is a new monitor?) then you should...

  1.	Open display in Control Panel.
  2.	On the tab settings in the screen resolution, drag the slider to the right until it shows the parameters of selection to 1680 x 1050, and then click apply.
  3.	When you are prompted to apply the settings, click OK. Your screen becomes black for a moment.
  4.	Once your screen resolution changes, you have 15 seconds to confirm the change. Click Yes to confirm the change. Click No or do nothing to return to your previous configuration.

  Now - if you do not have the choice of 1680 x 1050, it is a new monitor and you have the latest driver for your video - card, then probably your video card was not made to support screen widescreen resolutions.

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.