GBM-1200 a - gateway to broadband wireless PA3175E-1ETC

Similar Questions

• base system device and a HP ev2210 1xEV-DO Broadband Wireless Module as well. Missing driver

  Your search: I have a laptop Pavilion dv2500tw CTO. I have upgraded from Vista to Windows 7 Home premium. Now it shows 2 missing base system devices and a HP ev2210 1xEV-DO Broadband Wireless Module as well. Help

  Note: Mistakly I delete the partition system (Win Vista) when I clean install win 7 32-bit home pre.

  Hello:

  You need this driver for the base system device.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-54958-1&cc=us&DLC=en&LC=en&OS=2093&product=3632220&sw_lang=

  You can try the Vista driver for the card broad band.  There are no Windows 7 drivers for it.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-65526-1&cc=us&DLC=en&LC=en&OS=2093&product=3632220&sw_lang=

  If the Vista driver does not work, you can see if this driver windows 7 works. I don't know whether the pilot includes your model too or if it's just for the 2400.  This driver appears on the history tab of revision for the HP ev2210.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_83605_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• GBM-1200 has parameters with A0L ADSL broadband

  Hi, I wonder if anyone knew the parameters of the WBG-1200 a for AOL.
  AOL is very useless and they won't give away customer reviews on the implementation of a wireless connection unless they bought two specific products they advertise. They can only give basic advice for customers who do not buy it specified product and the basic advice I received was contradictory.

  I was told that I need the PPoA configuration and then told me that I needed PPOE. Is anyone know what are the settings are correct for fashion, a Simple configuration and everywhere where I might need to know.

  My OS is Windows XP Professional and my PC if this is useful is a Satellite Pro 6100 model that has integrated LAN Mini PCI card already.

  Thank you

  Post edited by: rachelrising

  Hello

  I unfortunately can't explain exactly how you can configure your WBG-1200 has because he is unknown to me. At home, I use the PPPoE protocol. In this case the IP address will be automatically assigned by the ISP (Internet Service Provider). It is very important that under Protocol Properties Internet IP address must be the value automatically.
  The explanation, which you will find under http://www.finepointnetworks.com/research/pppoe/.

  All other parameters are specific ISP.

  Good bye

• Satellite M30 - impossible to use broadband wireless sky - WPA not suppprted

  Hello

  I have laptop Satellite M30 and I can't use wireless broadband from sky as it says: "your network adapter does not support WPA" what should I do?

  Prasad

  The error message "your network adapter does not support WPA" says it all!

  The wireless network card installed in the M30 does not support encryption WPA WLan.

  To resolve this problem, you can buy and wireless network card that would support this WLan encryption.

  I think the easiest would be the use of external USB WLAN which supports the WPA!

• GBM-1200 - lost documentation

  I have a 1200 GBM has for a year; I want to reinstall the device, but I lost all my documents.
  I still have the address to access the modem, but then I wonder for the user id and the password I have more. Can someone help me with this (installation manual, first time user id and password)?
  Thank you

  Hello

  Sorry, but I think you should communicate with the support of manufacturing of WLan router and not users of Toshiba.
  I put t know if it is possible to remove the router password if you have forgotten this s.
  Help maybe reset the default settings, but as I said, the detailed information you should obtain form manufacturing of the router.

  PS: I put t know how it is possible to lose the documentation and forget the password.
  For me it s amazing.

• network unindentified - cannot open any Web site, it is connected to the Sky broadband wireless. The network presents itself as an unidentified network.

  my Dell insperon won't open any site web is connected wireless broadband from Sky, he says in the network sharing center that sa is an unindentified network can help any one? Please...

  All filters are mounted?

  A friend has lost its internet connection and the cause was a sky engineer do more fit a filter. The second engineer of the sky could not understand why a filter was not mounted because it is an easy and is a standard procedure when installing sky! Connection failed after using a Service online store of sky and, possibly, the link between the two has been achieved.

  Talk to Sky support as they should solve the problem!

  This link shows what looks like a filter

  http://www.Amazon.co.UK/micro-filter-broadband-ADSL-router/DP/B000NPA53Y

  Once you got all mounted filters, you may have to reset the router and sky should help with that.

  Hope this helps, Gerry Cornell

• is identical to broadband wireless.

  I don't know as much as you can tell. If wireless is not the same thing how we change broadband

  Hi hojo1129,

  Wireless is "one" of the ways that your PC can connect to broadband. Broadband itself is provided by your ISP (Internet service provider) and comes down the telephone line or as a packagae by a cable company. You connect your computer to a router via a cable from the router to your PC or wireless. To connect wireless PC needs to have a wireless card installed inside your PC or on a plug in USB dongle.

  Before connect you to the internet, you will need to get a connection high speed. Which collect you all this and how much each month it costs depend on the country you live.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Wireless printer clashes with broadband wireless connection

  I recently bought a C4580 printer that seems to work very well - but every time I turn it on, I lose my internet connection!  The only way to recover is to put off the printer and the power of the cycle on the wireless router.  My router is a D-link ADSL model, about 5 years and may precede the arrival of autonomous wireless printers - this could be the reason?  Before you buy a new router, I would be sure that would solve my problem - any advice would be welcome.

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Qosmio F20: cannot get broadband wireless

  Hello
  I just purchased a Qosmio F20 age of 8 months, and bought a Netgear rangemax wireless router so that I can go wireless. The only problem is, I don't know how!

  I bought a wireless card for my old computer (the one that the qosmio replaced) and it was facing up and running in two minutes, so the router is ok, but I don't know how to "go wireless" on an integrated card. I contacted a help forum and they suggested that my wireless card for laptop may not work and to contact toshiba for updated bios?

  you tell me how to check and get an update if necessary?

  Thank you!

  Hello

  on the Support pages, you will find BIOS-downloads.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp

  It is quite simple to find the BIOS for your model, download and install it.
  But it is not necessary to get the Wireless LAN to work.

  Since you have the old PC to go online with Wifi, you must have at least basic knowledge how to configure the computer to connect to an existing network.
  Please tell us what steps you have taken to implement the F20.

  BR

  Tom

• Satellite M110: The USB Modem broadband wireless fails to install

  Hi all

  I have a satellite M110 machine under XP SP3.

  I've tried two different brands of wireless USB modems. The two installation the corectly modem drivers and Device Manager shows this. However, pilots of Port of Coms do not install. The installation wizard displays the message "driver did not install correctly, Access is denied."

  Modem providers cannot explain failure given that the modems will work on my desktop machine (vista) without any questions just plug-and-play so to speak.

  I tried-

  (1) disable all anitvirus programs and firewalls.
  (2) deactivation or deletion of all other modems and internet connections
  (3) update BIOS
  (4) restart completed after all the above steps
  (5) verified all the drivers are the latest and the greatest part up to date.

  Returning the status 'out of box' re-loading of windows is not an option I've run a number of programs on my machine that are no longer available in the format that I use in my business. A suggestion was made by a tech Windows registry values are incorrect and are blocking the installation?

  You said, that the Wireless USB modem works on your desktop with Vista. Modems supported by Windows XP or Windows XP SP3?
  I would like to do a downgrade to SP2.

  In addition, I think that the best way would be a reinstall of Windows. If it s not an option, try it on another HARD drive in the laptop.
  You don't, so no risk of losing your data.

• Driver problem Pavilion dv6t 1200 CTO Vista Business SP2 wireless

  The following wireless published on the HP website driver does not work:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69898-1&LC=en&DLC=en&cc=us&lang=en&OS=2093&product=3945150

  I am able to download and install it, but after that the Setup program runs is always no showing in network connections wireless network connection.

  SOLUTION:

  Installation via Microsoft Update worked.

  You can also simply the installIntel drivers. Before installing this driver uninstall the old:

  Intel® PROSet/Wireless driver here for Vista 32 bit

  Intel® PROSet/Wireless driver here for Vista 64-bit

• Broadband wireless connection

  Trying to connect the device to Verizon Wireless Hotspot for a Compaq Presario V2000 / V2414NR (around 2005) running WIN XP Home Edition, and Internet Explorer-8 resulting in the following message: Windows could not find a certificate to connect to the "Verizon" network... Question: WHAT CERTIFICATE! What kind of certificate? Of who/where? How can I get it?

  Hello

  Please check and get it from Verizon:

  https://SMP-01.verizonbusiness.com/certinfo/certmeaning.do?CERTID=021505D200

  Kind regards

• How to use the modem (2 Mbps) wired ADSL & 3G data card services to large internet wireless broadband (7 Mbps) in Windows XP at the same time?

  Hello
  I have a (2 Mbps) wired DSL modem and internet connections broadband wireless (7 Mbps) of 3G data card.
  When I use these internet services individually, they work very well.
  I like to use these services wireline & wireless internet connections at the same time, so that I get the total speed of 9 Mbps.
  When I connect and try to use these internet services at the same time, I can't go through it.
  Please inform how to configure Windows XP to do this?
  Thank you
  -to swim.

  Hi dswam,

  Please provide your comments on the design of the Windows network. If you want to see several internet connection option in the future versions of Windows, you can submit your comments here.

• Can I use as a point of access Wireless-G broadband router?

  I use a router broadband wireless Netgear as main router to the ground floor and connected to the internet. I connected an access point wireless of LinkSys (WAP54G) as a wireless Repeater. Same SSID however, I turned wide dissemination. My office upstairs, I have wifi internet access very well and remain connected indefinitely. However, shortly after connecting to the Office VPN (off-site), the connection drops-both internet and VPN! I ran a loooong cat5 to the office on the floor and when it is connected to WAN I remains connected to two connections indefinitely. I do not have another AP, but I do not have a router Wireless G (WRT - 54G). Can I use this router as an AP, the same SSID, but I noticed on previous posts I should reactivate broadcast on all devices and change the channel settings. I noticed, when I went into the Setup utility 192.168.1.1, I access my netgear router, how to enter the Linksys router?

  Thank you

  Ken

  Nothing beats an AP on the WRT mode. It's just connecting it via the main router LAN port, you can use the access point without going through the router within the WRT component.

  You will have to do exactly what I wrote. Don't change anything on the Netgear.

  1. disconnect your network WRT. Wire a single computer to a LAN of the WRT port.

  2. open the web interface of the WRT to http://192.168.1.1/ since the computer you plugged on the WRT.

  3. on the main change WRT configuration page the LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server.

  4. save the settings. Unplug the computer.

  5. wire one of the LAN ports of the WRT to the Netgear. Do not use the internet port of the WRT!

  That's all. You don't change anything after that. It is the final configuration. You can now access the web interface Netgear http://192.168.1.1/ and the web interface WRT to http://192.168.1.2/

• FiOS router m1424wr wireless broadband, having problems to set up

  I just got a used frontier fios model # m1424 wr wireless router.i broadband went to set up after download manual and everything was happening along gently until I tried my roku wireless to the router in place hang, I kept getting errors that my coaxial cable is not connected or broken , I said fine and went ahead and plugged an Ethernet cable for the router.again I got error this coaxial cable not was not connected.i was informed by the operating instructions I should or the other of these connectors plug into the socket that the telephone company had provided in the wall.i can not get my Ethernet wan or coax wan light to come on the download speed of 1 router.i GET g but unable to connect to him because the internet only I get is through a wireless adapter not the wall.i go to 192.168.1.1 it says router status STOP check your connection.it broadband also said I have 3 items connected by Ethernet (2 are active) and 4 by wireless, none of whom was followed active.i instructions very carefully and I can not understand.my first it is You can get anything from the coaxial connection and Ethernet, the phone company installed in everybodys Home.la 2nd question is how can I connect my roku to router when I can't get hooked using Ethernet or coaxial.need

  Hi James,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are facing problem to implement a router broadband wireless. I suggest you to return the article mentioned below and see if it helps you to configure the router.

  Set up a wireless router

  Yes, if the router has the available slot so we can connect our computer to the router with Ethernet cable. If you are unable to connect Roku with Ethernet cable, I suggest you to contact your service provider and see what they suggest.

  Keep us.

  Kind regards