FiOS router m1424wr wireless broadband, having problems to set up

Similar Questions

• Router C4780 wireless network belkin problem

  I have a C4780 which worked well for several years with at least 2 previous routers. I have a Belkin AC1800DB have changed recently and now unable to connect to the router (laptops are connected wirelessly to Belkin WPA2 network without problem).

  When I run a network of C4780 test report it says local networks are detected (including Belkin WPA2) but shoes FAIL against network name SSID found. Similarly the wireless Assistant from the installation disc, the list of available SSIDS for the connection is empty. C4780 both Belkin have WPS, but this does not work in mode button or Pin.

  Because the problem is to find the SSID for all networks I do not think that his associate Belkin (just strange that the problem occurs at the moment I change the router).  But as the C4780 connected perfectly to my previous router, that I do not understand why I now this problem of wireless network connection.

  Any advice much appreciated.

  Try this.   Configure the router to a wireless channel fixed as 1, 6 or 11, never 'auto '.   'Mixed' mode, try now.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• New problem z50 - 75 wireless? Startup problem

  Hello

  I had an another hp laptop which had a problems but the know-how could not fix it so they give money and I brought another Hp 4 days but then she had to be exchanged because of defective. Currys and PCWORLD even gave, but the problem kept pass. So I just paid the HP one and brought 3 days LENOVO Z50-75 it y a. the first Hp laptop, I had, had dns clients warnings in Event Viewer when you use wireless. Same thing on the new computer hp laptop. This problem still occurs in the LENOVO one too. These events started in Windows 10 for all laptops hp and lenovo. My computer laptop lenovo came with windows 10 in any case. So either it's a bug that should be fixed by a new update for the network adapter needs to be released. Computer laptop lenovo has Qualcomm Atheros the old hp laptop realtek the new computer hp laptop that was defective was and intel double wireless broadband and the same edition, DNS CLIENT EVENTS 1014 WARNINGS are still happening. This is definetley not my ISP fault because I replaced the router, more they found nothing on a week 2 diagnostics test on my internet. SO I just want to say lenovo that if there is a way you can fix this. Another thing is that after installation WIN10 threshold 2 on Lenovo Z50-75 when starting of the laptop it shows the logo screen once then black lenovo and then black screen again, then it boots. I have also all the latest updates. So if there is a way guys can fix that also. I'll post this in the microsoft forums too if they can help. Thank you

  Hi I managed to solve this problem by disabling the DNS CLIENT service, but always the startup problem also happens when I stop or restart the cirlce logo going arouns the shows as usual then flashes then closed restartsor and the same thing happens in the Welcome screen it flashes (black screen for a second), and goes after UPDATE of TH2

• IM unable to share my connection wireless broadband (AUNTIE photon) with my 620 Lumia

  I want to share my AUNTIE Photon connection that I use on my laptop with my 620 Lumia. the option create a connection adhoc on Windows 7 laptop did not work.

  then I tried through some applications of www.download.com as 'mHotSpot', "Virtual Router WiFi", "WiFi Hotspot Creator" and "VirtualRouter Installer". they worked for a while, but all of a sudden all of them stopped working, without getting any change in the network settings.

  the problem with all of these applications is now that they don't show any connection in the internet connection to share field.

  my phone is capable to detect the router BSNL broadband and internet works fine through the connection with this router ADSL Wireless.

  someone kindly help.

  Thank you very much, Mr President. successfully connected my laptop through AUNTIE photon.

  However, not directly. I had to use the software "mHotspot" to install a hotspot first. my laptop does not detect the connection from computer to computer that I created from my laptop.

  Anyway, the work is done, thank you very much... :)

• I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

  Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

  Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

  Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

  SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

  Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

  Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• Wireless broadband gateway WBG-1200 Toshiba has

  Hello

  I have this router, but could not find updates the firmware for it on the Web from Toshiba site? Is there anything (I think it's a discontinued product)?

  The reason I ask is because the device has stopped working since my ISP changed my ADSL connection to the ADSL service BT instead of the normal ADSL Max.
  This device should work with ADSL Max? Do I need to change the settings to make it work?

  Thank you.

  Hi gloomdog,

  Looking at the [get | http://uk.computers.toshiba-europe.com/Contents/Toshiba_teg/EU/Others/Generic/TEG_Gateway_1200_Specs.pdf |] WBG-1200 has Wireless Broadband Gateway
  ] to this router, it seems it should be compatible with ADSL max. I couldn't find any firmware updates online, but would suggest you reset the router and let automatically pick the BT wholesale's ISP configuration. If this does not work, I would try to access the router configuration page and check the connection with your ISP settings.

  Good luck

  Paul2008.

• Apple extreme wiring to the quantum gateway FIOS router diagram

  Try to set up a roaming network with my Apple Extreme to a quantum gateway FIOS router.  I think what he WAN port s Quantum gateway to the Airport Extreme Lan port.  Or a quantum gateway FIOS to the port WAN Airport Extreme Lan port.  Trying to set up the Airport extreme to extend my wifi and lan.

  I use a Mac Pro OS is El capitan.

  Assuming that the AirPort Extreme has default settings at this point.

  Connect an Ethernet cable from one of the LAN ports <>- the bridge of Fios (there are probably 4 LAN ports, choose one you want) on the WAN port on the AirPort Extreme "O".

  Apple installation "wizard" will offer the correct type of installation. To get the wizard and running, click on the WiFi icon at the top of the screen of the Mac and are looking for a list of Base Station new AriPort. Just below this list, click on AirPort Extreme

  The wizard will take a few seconds to analyze things, and then see a screen that looks like this, except that you will see your AirPort Extreme in the photo.

  

  For the name of the network... Enter the exact same wireless network that provides the gateway FIos

  Base Station name... Enter a short and simple name that you want to call the AirPort Extreme

  Password... Enter the same exact word of wireless network that uses the Fios bridge

  To check... Enter the password to confirm

  Click next

  The wizard will set up everything for you. When you see the message installation is complete after a minute or two, click done and you're done.

• I'm having problems to connect to internet with my iMac, no problems using my macbook pro in the same room, also see other peoples wifi appearing

  Having problems connecting to the internet with my iMac, no problems with my macbook pro in the same room, also seem to be picking up another Wi - Fi connection to others

  Go to > use Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support

• Router WGR614 wireless. Wireless after restoring the settings.

  Worked well. I pushed the button to restore the factory settings, have now no wifi. I have disconnected/reconnected all the modem and the router. I have the router and wireless internet.

  I solved my problem! After resetting my router again I have it connected via ethernet cable to one of the LAN ports on my computer. I typed in routerlogin.com. This guided me through the installation program. Thanks to all who tried to help.

  Gail

• R7000 as router with the router for mobile broadband Internet

  Hey guys. First of all, my apologies for my somewhat inadequate English skills. Secondly, I am brand new to the community, so apologies in advance for any fault :-) Third stop, apologize for having a complete beginner :-D

  So, for the issue: I recently bought a router top mobile broadband 4G (4 G MBR) to my apartment, because of the gap of strength and speed signal very low quality of the cable to the ground on my Street (fiber is to come next year).

  But the router provided by my operator isn't on par with my router R7000 Nighthawk when he comes to reach wifi, wifi speed, number of outputs of LAN and power of the processor.

  So, I want to use my R7000 my router, the internet signal from the air to the 4G MBR, then by cable to the WAN of the R7000.
  In other words; I want to just 4G MBR to simply pass / transfer the internet signal to my nighthawk R7000 router so I can use the R7000 as my router, LAN and wifi.

  How can I set this up?

  Thanks for your help!

  Update: the MBR has been no help at all. As far as I could tell, there is no possibility to bridge or pass-through mode. The R7000, as she does the work. I just put it in AP mode, adjust all the wired connections DHCP/auto IP assign and everything works great.

• Intermittent connection with Cricket EC1705 Broadband modem problems.

  HARD TO STAY CONNECTED A WIDE CRICKET BROADBAND MODEM EC1705

  Hello

  1. What Windows OS version are you using?
  2. Were there any changes made to your computer before this problem?
  3. The internet disconnects frequently?
  4. What web browser do you use?
  5. You get an error?

  Try the methods and the resolution of problems in the following article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also reference: http://windows.microsoft.com/en-us/Windows7/Why-is-my-Internet-connection-so-slow

  I hope this helps.