General call for help (w/ESXi 5 Ent vServer more)

Similar Questions

• A person called me and told me he was calling for help me to correct a mistake that had occurred on my laptop. do I trust him and follow his instructions?

  I had a couple of calls from a man "not in these parts" by saying he was calling for help to correct an error on my laptop. I had a few mistakes, not so bad, but I need to reconnect a lot! Do I trust him and follow his instructions?

  Do I trust him and follow his instructions?

   
  No! This is a phishing scam. How anyone but you know that you had problems?

• I do not see the table of contents, Index, search & amp; Glossary when the call for help on a topic

  Does anyone else have this problem? I use webhelp with contextual sensitivity, and I appeal to the table of contents, Index, search, and glossary to display. If I go to the welcome home page, they are exposed. But when we ask for help on a particular page, these areas are not shown, but they can be opened using the view link. I much prefer to see the exposed left pane, rather that ask the user to click on this link. How can I do this?
  
  Robin Valk

  Hi Robin.
  See this link using the appeal of the CSH Webhelp output.

• Satellite A 30 call for help! It is no more installation programs.

  Dear,

  This time, my computer couldn't handle install the software when I want to. I don't understand the following messages. Its 16-bit subsystem Windowscalled: 'C:\WINDOWS\SYSTEM32\AUTOEXEC. NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications... »
  It is followed by the installation WIZARD message: "cannot find acme Setup. What does this all mean?

  Please any help soon...!

  Hello

  You can check the link below for the subsystem error message

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324767.

  Also requests you try to install, you did the windows updates, you use XP home? Pro? Service Pack 1 or 2?

  See you soon

• VIEW very difficult to write (call for help)

  I was stuck for many hours on this problem...
  
  Suppose you have two orthogonal tables that follow the same inventory *. For example, we follow by lot or batch code and a securities regardless of status (available, reserved, wedge, etc...).
  

  create table lot (skuid varchar2(10),qty number, lot varchar2(10));
  insert into lot (skuid, qty, lot) values ('SKUA', 3, 'A5');
  insert into lot (skuid, qty, lot) values ('SKUA', 4, 'A10');
  insert into lot (skuid, qty, lot) values ('SKUA', 1, 'A11');
  
  
  create table status (skuid varchar2(10),qty number, status varchar2(10));
  insert into status (skuid, qty, status) values ('SKUA', 5, 'AVAIL');
  insert into status (skuid, qty, status) values ('SKUA', 1, 'RES');
  insert into status (skuid, qty, status) values ('SKUA', 2, 'HOLD');

  Since it is probably a very bad way to model these data (and for many other reasons...) the challenge is to write a view that makes all this information available in a single view.
  
  What these paintings looks like now:

  SQL> select * from lot;
  
  SKUID             QTY LOT
  ---------- ---------- ----------
  SKUA                3 A5
  SKUA                4 A10
  SKUA                1 A11
  
  SQL> select * from status;
  
  SKUID             QTY STATUS
  ---------- ---------- ----------
  SKUA                5 AVAIL
  SKUA                1 RES
  SKUA                2 HOLD

  Should look like this in the *(desired output of view) view: *
  

  SKUID          QTY           LOT            STATUS
  ----------     --------      ----------     --------
  SKUA           3             A5             AVAIL
  SKUA           2             A10            AVAIL
  SKUA           1             A10            RES
  SKUA           1             A10            HOLD
  SKUA           1             A11            HOLD

  What I did is sorted by LOT and kept a total run of each BATCH, because the quantity consumed the STATE table until each BATCH/STATUS is consumed by the view.
  
  It is simple and intuitive for a human or program, but I really struggled to try this in SQL. Intuitively, I feel I must join the tables (knowing I'll get a Cartesian product) and do the math to determine the quantities and then to an external selection, throw the Cartesian lines that I didn't need (with the quantity calculated from 0). I thought that this would be certainly solvable using analytical functions to keep the totals accumulated by STATUS and by the draw, if I join on the two tables as a starting point, but the problem is too circular... analytical columns depend on the themselves (or the lag() of themselves). I'm doubting it's possible with the analytical functions. Also considered to be CONNECT BY on the join of the tables of SKUID, but does not seem to fit...
  
  Oh,... a 'note' more... the view should be achievable on * 8i *.
  
  PL/SQL is necessary? (I'd rather she be seen independent SQL without custom function calls, but if this is impossible, be it). More accurately, I would prefer it to be as effective as possible, so that means that only SQL or PL/SQL.
  
  
  If anyone can solve this?

  Hello

  The following solution makes a separate line for each element (such as quantity) and re-handset then using GROUP BY.

  I made a few assumptions about the order.
  I guess the lots are sorted by the first character (sort as a string), then by the numerical value of the other characters. In other words, if you had much 'B1', he would come after much "A11" (because of the first letter), but much "A5" comes before "A10" and "A11" (because of the digital part). You will need to adjust the ORDER BY clause that is analytic in the subquery lr if I guessed wrong.
  I assumed that the status is ordered exactly as it appears in the output: 'ENJOY '.< 'res'="">< 'hold'.="" again,="" if="" i="" guessed="" wrong,="" change="" the="" order="" by="" clause="" in="" sub-query="">

  SELECT       lr.skuid
  ,       COUNT (*)     AS qty
  ,       lr.lot
  ,       sr.status
  FROM       (     -- Begin in-line view lr of lot data with r_num
              SELECT  l.skuid
            ,     l.lot
            ,     ROW_NUMBER () OVER ( PARTITION BY  l.skuid
                                                 ORDER BY          SUBSTR (l.lot, 1, 1)
                                ,                TO_NUMBER (SUBSTR (l.lot, 2))
                                 ) AS r_num
            FROM     lot     l
            ,     (          -- Begin in-line view lc
                      SELECT     ROWNUM      AS q_num
                      FROM     all_objects
                      WHERE     ROWNUM     <= ( SELECT  MAX (qty)
                                          FROM    lot
                                      )
                 )     lc     -- Begin in-line view lc
            WHERE     lc.q_num     <= l.qty
         ) lr     -- End in-line view lr of lot data with r_num
  ,        (     -- Begin in-line view sr of status data with r_num
              SELECT  s.skuid
            ,     s.status
            ,     ROW_NUMBER () OVER ( PARTITION BY  s.skuid
                                                 ORDER BY          CASE
                                          WHEN  status = 'AVAIL'  THEN  1
                                          WHEN  status = 'RES'     THEN  2
                                          WHEN  status = 'HOLD'     THEN  3
                                                END
                                 ) AS r_num
            FROM     status     s
            ,     (          -- Begin in-line view sc
                      SELECT     ROWNUM      AS q_num
                      FROM     all_objects
                      WHERE     ROWNUM     <= ( SELECT  MAX (qty)
                                          FROM    status
                                      )
                 )     sc     -- Begin in-line view sc
            WHERE     sc.q_num     <= s.qty
         ) sr     -- End in-line view sr of lot data with r_num
  WHERE       lr.skuid     = sr.skuid
  AND       lr.r_num     = sr.r_num
  GROUP BY  lr.skuid
  ,            lr.lot
  ,       sr.status
  ORDER BY  lr.skuid
  ,            MIN (lr.r_num)
  ;
  

• It is the worst process for acquiring software! I'm frustrated and need to talk to someone alive. should what number I call for help installing Photoshop elements13 for Mac?

  How long does it take to get a response?

  You can probably be helped in this forum now, but if you're not in a hurry you can chat adobe.

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• VPN - question of General design for a ut of a router tunnel more

  Hello

  We have a router that has VPN connections with different partners of our company. VPN remote access were used on computers that are connecting to the different partners of our company.

  There has been problems of this kind, that is to say put on both a watchdog and a customer vpn cisco router led to blue-screens on the PC.

  The current idea is to put different tunnels from site to site on the router (default gateway of PC clients that connect to the partners). My question is... How our PC to get DHCP addresses on networks of visitors, once the tunnels are up? I guess I'm alittle confused about the address for the PC on our side how will work.

  Thanks for your help.

  Divide the pool of ip from the internal network, you're going to visit. for example the document below will be exaplain the same configuration in user mode.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806ab788.shtml

• Urgent request for HELP, received a phone call from GEEKS for PC TO fix my computer, because theres a Trojan horse horse hidden on my Thru Microsoft Windows folders.

  I received a phone call from microsoft technology who wanted to go on my computer & difficulty a Trojan horse, which is on my computers (more than one computer in my house). If I don't get this fixed right away, I could lose my computers & will not work to full capascity as before the Trojan horse was built-in on my computers in the last 10 days. I was very leary about it wanted to check into that first. He said he could remember at an agreed time. So I set up to 22/05/12 at 4:30 pm p.t.. Is it a scam? This should be an international alert to all users of mircosoft for msn & email clients. They would come by phone now. SO WHAT IS GOING ON HERE? !!!

  Hello

  It's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• CALLS FOR A PERSON WHO CLAIMS TO BE AN EMPOLYEE OF MICROSOFT.

  I RECEIVED PHONE CALLS FROM A PERSON CLAIMING TO BE A MICROSOFT EMPLOYEE. INDICATING THAT THEY NEED TO ACCESS MY COMPUTER. SO IT CAN FIX A PROBLEM WITH MY VISTA SOFTWARE. IF I CAN'T ACCESS. THE PROBLEM, THE SYSTEM WILL BE CRASHING. DESTORY ALL OF THE INFORMATION IN MY COMPUTER.

  WHEN I TOLD THE PERSON THAT I WAS NOT A HOUSE, I WAS ON MY CELL PHONE. THE APPELLANT ASKED ONE DAY DETERMINED AND THE TIME TO CALL ME BACK.  MARCH 7, 2011 AT 18:00. IF THIS PERSON CALLED ME BACK. MUST GIVE HIM ACCESS TO MY COMPUTER?

  I WOULD LIKE TO KNOW IF THIS IS A REAL MICROSOFT EMPLOYEE.

  I THINK SHOULD KNOW YOU. I AM A SENIOR. I LOST HEARINING IN ONE EAR AND WEAR A HEARING AID IN THE OTHER. BECAUSE OF MY LOST HEARING, I AM NOT ABLE TO UNDERSTAND PHONE CALLS FROM OVER SEAS. THIS CALL CAME MORE THAN SEAS.

  I CHECK MY COMPUTER DAILY FOR UPDATES AND HAVE McAFEE INTERNET SECURITY INSTALLED.

  I DON'T USE MY COMPUTER TO SEND EMAILS, CHECK THE GLOBAL EQUITY MARKETS, LOOK AT VARIOUS THING ON THE INTERNET AND CHAT WITH FRIENDS, ANYWHERE IN THE WORLD.

  IT WOULD BE GREATLY APPERICIATED IF I COULD RECEIVE AN ANSWER TO MY PROBLEM.

  Hello

  Absolutely NOT. It's a total scam.

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

• Implementation of the call home help

  Hello

  So I'm trying to set up notifications by e-mail to one of our UCS configurations and I run into some questions, or rather, I'm not sure what im up against.

  I would like to paint a picture and see if someone can help me understand what's wrong.

  I'm under the asumption that Call Home can be configured internally, without having to communicate with cisco, in order to receive email alerts whenever there are problems in the system. (the cisco assisted by an intelligent call home, that im not interested at the moment). Is it a correct assumption?

  Requirements for the establishment of appeal asking conectivity ip between the interconects tissue and the smtp server. Currently the fabrics and the mail server are on different VLANS, however we have access lists to allow traffic through VLANs smtp. In addition, there are precedents of other servers on the same vlan as the tissues by communicating with the smtp server to send notifications. Thus, it is confirmed that such traffic flows between the two VLANs.

  So on until the configuration.

  On the general tab for call home my email is on the email field coordinated as well as in the From and reply to fields. The ip address of the smtp server and port 25 are also specified in the corresponding section.

  Tab theres 3 defautl profiles (CiscoTAC-a, full_txt, short_txt) plus a profile adutional created by me. Alerts in the additional profile groups are Cisco Tac, diagnosis and environment. No other options are available. It also has 'Warning' like format Txt Full level and my email as the recipient.

  In the policies tab, I activated aquipment degraded material unusable, hardware problem and link down.

  So, knowing these parameters should I notifications by mail electronic wexpect when a drive goes down or, if down, link when a host starts up again (I added that one, to test the reason)? Or have I missed something. Any other info I could provide to better understand my situation?

  Thanks in advance,

  Stephen

  --
  Stephen Garcia
  Ringling College of Art & Design

  Stephen,

  Yes, Call Home is just internal, while Smart Call Home is one that opens the case with TAC and you will pay for this feature.  If you are right with your first assumption.

  Regarding the link between tissues and the SMTP server, run a ping of the FIs and check connectivity, if this works, you should be fine. Orders must be:

  UCS # connection local-mgmt

  X.x.x.x ping B (local-Mgmt) # < if="" you="" do="" not="" specify="" the="" amount="" of="" pings="" to="" send="" with="" the="" "count",="" the="" ping="" will="" be="" an="" extended="" ping="" (="" equivalent="" to =""> t)

  Settings Call Home look quite good for me, but as far I know (IMHO) unusable discs are NOT reported by Call Home while a link down is definitely declared.

  Remember that policies must not only be created, they must be turned on too; and also do not forget that the system will only send classified messages according to the level that you specified (warning) in the profile you created.

  You can also use this document for troubleshooting more far away, like sending an "inventory of the system" and make sure that he knew.

  http://www.Cisco.com/en/us/products/ps10280/products_tech_note09186a0080bef123.shtml#Topic1< see="" "troubleshooting="">

  I hope this helps and if so, please note it.

  -Kenny

  Cisco support community is also present in Spanish:

  https://supportforums.Cisco.com/community/Spanish/data_center

• Ios10 updated and now can't make or receive phone calls. Help!

  Ios10 updated and now can't make or receive phone calls. Help!

  Try a forced reboot. He can heal really weird unexpected behavior. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Call a help file (.chm) when press a button on the front

  I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.

  Call the help file (.chm) when press a butto wrote:
  I have only called when press a key then right click the mouse and navigate the selected key for the button.

  This part is not so clear for me.

  But you have coded according to the part file .chm calling within the event to change the value of this button?

  If not try this using the Structure of the event & post here.

  If you post your code here, someone can help reg what has gone wrong.

• Just got yet another call for "Windows Service Station"

  Just got yet another call for "Windows service station', saying: I was hacked and my computer sends windows warning messages and if I didn't follow his instructions all my data would be deleted... An Indian-sounding guy named Sam... I played along and got a phone number, saying: I would like to remind him he said 0808 1890111 which is a UK addiction hotline...

  I played along 'Sam' gave me an extremely long code to type in something on the windows event viewer... I know it's a scam and we have these calls often 3 times a week for a few years now. I play at the same time or am quite rude and tell them to be ashamed of themselves, depending on my mood... I really wish that they would go, but I can't this blocks 'any number' because it is off the coast.
  Any suggestions on how to remove our number and the name of their list (I asked the scammers do, but they don't notice).

  Certainly a SCAM, you have made the right choice. Never to give them information and never leave access to your PC.

  It is difficult, if not impossible to remove your number from a list of scam once its on it. And it's hard to know how they got it in the first place. It could be a list simple phone book. Recording with things like Telephone Preference Service (United Kingdom) and asking to be made "Red" (BT - UK) can make it harder for them to get a number in the first place, but once they have it probably wont help. It can stop any other do however.

  There are devices like Call Blocker, which can be programmed for their calls not ring your line, but it depends on what number they release when they call. If their number is "held" and then some providers have a service to stop calls "deductions number' to ring your line. ACR service (BT - Uk).

  PS - the links above are a few examples of our services/devices to the United Kingdom for more information.

• View the calls for papers

  I'm content Chair EMP/BI for the Kscope16 Conference in Chicago. I would like to publish a call for contributions in the concerned areas.

  It of nothing that specifically prohibits this as far as I can see in the rules, FAQ or rules of conduct documents. The moderators have no problem with that? I don't really want to have my deleted messages simultaneously in eight areas and become a topic of conversation in the mod space...

  I do not think that a post from me on OTN involves any kind of support of the Oracle, but for what is interesting (and for those who don't know) Kscope is a 100% Oracle conference that enjoys the support of several "branches" of Oracle, OTN no less.

  I post here in order to achieve the OTN community managers (moniquevdb-Oracle, Laura Ramsey-Oracle and so on) for an 'official' answer and not to interview all the members, and very respectfully, I ask that someone don't not corresponding to the old description that wants to offer an opinion in a separate discussion. I'm sure that won't work.

  Thanks for your time.

  Product areas would not be the right place for this, but we can probably find a reasonable way to publish a call for contributions in a general area. I added you as a friend if you can me message directly. In the meantime I'll connect with Hocinebelatreche-Oracle and Oracle-valeriesimpson to make a recommendation.