Satellite A 30 call for help! It is no more installation programs.
Dear,
This time, my computer couldn't handle install the software when I want to. I don't understand the following messages. Its 16-bit subsystem Windowscalled: 'C:\WINDOWS\SYSTEM32\AUTOEXEC. NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications... »
It is followed by the installation WIZARD message: "cannot find acme Setup. What does this all mean?
Please any help soon...!
Hello
You can check the link below for the subsystem error message
http://support.Microsoft.com/default.aspx?scid=kb;en-us;324767.
Also requests you try to install, you did the windows updates, you use XP home? Pro? Service Pack 1 or 2?
See you soon
Tags: Toshiba
Similar Questions
-
I had a couple of calls from a man "not in these parts" by saying he was calling for help to correct an error on my laptop. I had a few mistakes, not so bad, but I need to reconnect a lot! Do I trust him and follow his instructions?
Do I trust him and follow his instructions?No! This is a phishing scam. How anyone but you know that you had problems? -
I need help I get error 6 installation program and creative cloud 1 error.
I need help I get error 6 installation program and creative cloud 1 error.
Code 1 https://forums.adobe.com/thread/1434528
6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code
-
Does anyone else have this problem? I use webhelp with contextual sensitivity, and I appeal to the table of contents, Index, search, and glossary to display. If I go to the welcome home page, they are exposed. But when we ask for help on a particular page, these areas are not shown, but they can be opened using the view link. I much prefer to see the exposed left pane, rather that ask the user to click on this link. How can I do this?
Robin ValkHi Robin.
See this link using the appeal of the CSH Webhelp output. -
VIEW very difficult to write (call for help)
I was stuck for many hours on this problem...
Suppose you have two orthogonal tables that follow the same inventory *. For example, we follow by lot or batch code and a securities regardless of status (available, reserved, wedge, etc...).
Since it is probably a very bad way to model these data (and for many other reasons...) the challenge is to write a view that makes all this information available in a single view.create table lot (skuid varchar2(10),qty number, lot varchar2(10)); insert into lot (skuid, qty, lot) values ('SKUA', 3, 'A5'); insert into lot (skuid, qty, lot) values ('SKUA', 4, 'A10'); insert into lot (skuid, qty, lot) values ('SKUA', 1, 'A11'); create table status (skuid varchar2(10),qty number, status varchar2(10)); insert into status (skuid, qty, status) values ('SKUA', 5, 'AVAIL'); insert into status (skuid, qty, status) values ('SKUA', 1, 'RES'); insert into status (skuid, qty, status) values ('SKUA', 2, 'HOLD');
What these paintings looks like now:
Should look like this in the *(desired output of view) view: *SQL> select * from lot; SKUID QTY LOT ---------- ---------- ---------- SKUA 3 A5 SKUA 4 A10 SKUA 1 A11 SQL> select * from status; SKUID QTY STATUS ---------- ---------- ---------- SKUA 5 AVAIL SKUA 1 RES SKUA 2 HOLD
What I did is sorted by LOT and kept a total run of each BATCH, because the quantity consumed the STATE table until each BATCH/STATUS is consumed by the view.SKUID QTY LOT STATUS ---------- -------- ---------- -------- SKUA 3 A5 AVAIL SKUA 2 A10 AVAIL SKUA 1 A10 RES SKUA 1 A10 HOLD SKUA 1 A11 HOLD
It is simple and intuitive for a human or program, but I really struggled to try this in SQL. Intuitively, I feel I must join the tables (knowing I'll get a Cartesian product) and do the math to determine the quantities and then to an external selection, throw the Cartesian lines that I didn't need (with the quantity calculated from 0). I thought that this would be certainly solvable using analytical functions to keep the totals accumulated by STATUS and by the draw, if I join on the two tables as a starting point, but the problem is too circular... analytical columns depend on the themselves (or the lag() of themselves). I'm doubting it's possible with the analytical functions. Also considered to be CONNECT BY on the join of the tables of SKUID, but does not seem to fit...
Oh,... a 'note' more... the view should be achievable on * 8i *.
PL/SQL is necessary? (I'd rather she be seen independent SQL without custom function calls, but if this is impossible, be it). More accurately, I would prefer it to be as effective as possible, so that means that only SQL or PL/SQL.
If anyone can solve this?Hello
The following solution makes a separate line for each element (such as quantity) and re-handset then using GROUP BY.
I made a few assumptions about the order.
I guess the lots are sorted by the first character (sort as a string), then by the numerical value of the other characters. In other words, if you had much 'B1', he would come after much "A11" (because of the first letter), but much "A5" comes before "A10" and "A11" (because of the digital part). You will need to adjust the ORDER BY clause that is analytic in the subquery lr if I guessed wrong.
I assumed that the status is ordered exactly as it appears in the output: 'ENJOY '.< 'res'="">< 'hold'.="" again,="" if="" i="" guessed="" wrong,="" change="" the="" order="" by="" clause="" in="" sub-query="">SELECT lr.skuid , COUNT (*) AS qty , lr.lot , sr.status FROM ( -- Begin in-line view lr of lot data with r_num SELECT l.skuid , l.lot , ROW_NUMBER () OVER ( PARTITION BY l.skuid ORDER BY SUBSTR (l.lot, 1, 1) , TO_NUMBER (SUBSTR (l.lot, 2)) ) AS r_num FROM lot l , ( -- Begin in-line view lc SELECT ROWNUM AS q_num FROM all_objects WHERE ROWNUM <= ( SELECT MAX (qty) FROM lot ) ) lc -- Begin in-line view lc WHERE lc.q_num <= l.qty ) lr -- End in-line view lr of lot data with r_num , ( -- Begin in-line view sr of status data with r_num SELECT s.skuid , s.status , ROW_NUMBER () OVER ( PARTITION BY s.skuid ORDER BY CASE WHEN status = 'AVAIL' THEN 1 WHEN status = 'RES' THEN 2 WHEN status = 'HOLD' THEN 3 END ) AS r_num FROM status s , ( -- Begin in-line view sc SELECT ROWNUM AS q_num FROM all_objects WHERE ROWNUM <= ( SELECT MAX (qty) FROM status ) ) sc -- Begin in-line view sc WHERE sc.q_num <= s.qty ) sr -- End in-line view sr of lot data with r_num WHERE lr.skuid = sr.skuid AND lr.r_num = sr.r_num GROUP BY lr.skuid , lr.lot , sr.status ORDER BY lr.skuid , MIN (lr.r_num) ;
-
How long does it take to get a response?
You can probably be helped in this forum now, but if you're not in a hurry you can chat adobe.
Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html
-
General call for help (w/ESXi 5 Ent vServer more)
Hello
I hate to feel that helpless and have to put up a post like this one. I have been using Xen (no XenServer Xen just) for a number of years and have been asked to evaluate ESXi 5 as a possible solution, because a client can go this route in order to obtain LEED certification (zero positions clients, virtualisation, virtualization, cloud, public and private, etc.)
It is in the Financial Services space, and we are currently using Xen XCP on individual servers so that a small group/team share the same server (s). We have done no HA, failover, clustering, etc., but we must move in this direction.
I have a trial license, but also a company full more license (signed for the eval after that I got the Ent +). I know it is not sensible, but we a sub-affiliate of a very big client VMware Enterprise, then we were given a license key to use for our assessment (6 months).
All I want to do is build a simple HA cluster through a multiple node machine - and then have it failover to a second machine (the two are exactly the same). As much as I know at this point is that I need vcenter Server to manage clusters & several hosts, but we do not have a domain, don't use AD (nor we want to) and we use hardly any Windows operating system. To complicate still, two groups will have to be in a sandbox environment, while the other two groups not - but none of the machines will never hit the internet. (which means that you VPN into a machine and remote desktop then in your virtual machine from the inside the VPN)
So we do not AD, we do not have a domain, most of our BONES ' are are Ubuntu Server (Linux CLI)
Is there video tutorials in line/youtube? Is it possible to Setup? I MSDN so I can easily fool around with AD + DNS if I need to, but don't currently use us and want to avoid at all costs.
I'm not most AD/DNS/Server 2008 smart person out there, but I could not yet find installation tutorials easier to try the 'standard' method to install it gave.
My demonstration/test environment consists of 4 Dell T5500 positions, each with 72 GB of RAM, 2 identical x 6-core CPU (with HT) and an array of 3-drive RAID5 HARD on a LSI HW raid card. each machine has 2 x dual port 10 G NIC and a single 1 gig NIC quad (that we will use in production). I would build two HA clusters, two machines for each and I would like to have a failover cluster on the other.
The machines are physiclly located in my office (not rack-mounted, etc.).
If someone could point me in the right direction it would be most appreciated.
THX!
Can I use a domain name (false) for the installation process, but then NOT use AD for my virtual machines? (I assume that you can simply because a Linux OS would not be in the announcement)
Yes, it's fine.
-
Notepad programs that work well for helping it to write free Java programs
Title says it all.
Free searching of software, but those curious works best for programming in Java.
Any help is greatly appreciated.
Thank you!I guess you don't want to use a real IDE (Eclipse, Netbeans are free) because they muddy waters for beginners. If this is the case, I agree with you, simply use an editor with syntax highlighting. I use notepad ++, but I don't know if this is "the best".
-
Are automatic updates, run every day. McAfee and SPyware Doctor, has problems with scans of Intelligaurd causing the reboot. Then the PC crashed.
KM45,
Here are some articles that cover some causes of the error code that you are experiencing. If none of these match your situation, you can search Microsoft Product Support for this error code, because there are several other articles related to this code. What happens when you try to start with the installation CD? You get an error?Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Need CD for Satellite Pro 430CDT BACK. Help, please.
Need CD for Satellite Pro 430CDT BACK. Help, please.
If you need some drivers like this, just to check that drivers toshiba download section:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Here, you have to choose 'Archive' and your machine.
Good luck
-
I received a phone call from microsoft technology who wanted to go on my computer & difficulty a Trojan horse, which is on my computers (more than one computer in my house). If I don't get this fixed right away, I could lose my computers & will not work to full capascity as before the Trojan horse was built-in on my computers in the last 10 days. I was very leary about it wanted to check into that first. He said he could remember at an agreed time. So I set up to 22/05/12 at 4:30 pm p.t.. Is it a scam? This should be an international alert to all users of mircosoft for msn & email clients. They would come by phone now. SO WHAT IS GOING ON HERE? !!!
Hello
It's a SCAM!
Avoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspxIn the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
(FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
(BJA).
http://www.ic3.gov/complaint/default.aspxNo, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
computer. So that's the fraud or scams to get your money or worse to steal your identity.Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-supportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
OT: security.
Dear community,
Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.
any help would be appreciated
Thank you
Hello
It's a scam.
Here are the tips that we regularly give the posters who receive these types of calls:
We have all the errors and warnings in our Event Viewer
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
You are the only person who knows if you gave them remote access.
If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
See you soon.
-
Satellite Pro P100 - support for 4 GB of RAM in Win7 64 and Intel Virtualization
Hello to the members of the forum,
I have the Satellite Pro P100 (PSPAHE - 002001GR) and I installed the WIN 7 Enterprise 64 free trial. I have Modules of memory 2 x 2 GB Corsair, a T7400 processor and Bios version 4.7. Everything works fine without their memory. Known BIOS all 4 GB, Windows see it uses but only 3 GB. I know im not alone with this problem, but I have not found a solution to solve it. In msconfig, all right, there's max, and the number of processors. RAM not activated.
If someone knows a way to work to use all 4 GB of installed Ram?
I would be much obliged if anyone can help.
Something else. Intel VT - X is not enabled by BIOS. Also, there is no option to do this. When I bought the laptop it is a feature that I want to use, and now the BIOS does not support it. Why didn't pay much for the laptop so characteristic specific card do not work propably?
Thanks to everyone for reading my post and want to help.
SOFC
Hello
Perhaps than that you seem stupid now, but I think that this model laptop was never supported for 64-bit operating systems, and I think the BIOS is also not designed for this.
If you wish, you can call Toshiba nearest service and ask for help. They have access to the database of Toshiba and they can check it for you. -
Ios10 updated and now can't make or receive phone calls. Help!
Ios10 updated and now can't make or receive phone calls. Help!
Try a forced reboot. He can heal really weird unexpected behavior. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
Re: Satellite A200 - shuts down for no reason
I was walking where post and for a long time, allows to get help. My laptop Toshiba Satellite A200, 3.5 years
* Problem: *.
Previously, its used to stop by itself in the middle of the applications without any warning, the station used to be /: screen stops, no input from the keyboard or the touchpad, but the headlights before that mean the laptop is 'ON' remained * then I used to restart and thought it was a prob. OS or a problem of battery/charger (replaced both but not difference) and then this thing began to be more frequent and now the day has come, it won't switch.Current scenario: *.
When I turn it on with the battery (without charger), turns on, screen lights up, it starts, power normal and at that time there if I plug into any compatible charger (I tried a bit), he died (the same way as mentioned in the "BOLD" letters above). If I restart or launch it otherwise while the charger is plugged in, it does not start but the headlights, the fan and the most important thing, to the processor (like the sound of sparks), this sound only sounded while I plug the charger.So, please help me out here, I don't know why he is not initialize
Hey Buddy,
This s really strange behavior, but I guess that this problem is related to hardware, I doubt it has something to do with the pre-installed software
It seems to be a serious malfunction of equipment.In your case I contact an authorized service provider and ask the guys for help. In my opinion, it might be something wrong with the motherboard or the CPU itself but that s my personal opinion. So the easiest way is that you get in touch with the guys because they can give you an official response and make an accurate diagnosis. After that, you can decide whether you want to repair the laptop. ;)
Maybe you are looking for
-
Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro. I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward w
-
How to enter the firewall what is underway
When the firewall snaps
-
KB948465 ServicePack will... install code 80004005
used to install Vista service pack 2. I proceeded to the installation of this update witch was the final version of SP2. but after start and go through step 3 of the process he says she completed 100% and that at that time there was there with a circ
-
Vista always forces me to change the password for the connection
I know that Vista is old, but we have an old computer that works yet that we allow our children to use. Periodically, we have to change the password for the connection. Is there a way I can stop this?