generate using HR 2015 - cautioned about copying a file that isn't even in my help

Similar Questions

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• I used to be able to copy a file and paste it on the internet, like e-mail. Then, I 'upgraded' and cannot. How can I copy files from the window and paste it into email when there are not options Paste as before?

  See above

  I used to be able to copy and paste, but since the upgrade can not

  toolbars is no longer available on the top

  How copy and paste emails or chat with a file in windows, sites like Match.com?

  > toolbars is no longer available on the top

  Assuming that you are referring to Internet Explorer missin the Menu bar...

  Right-click on an open under the address bar > click bar on the popup box.

  

• trying to copy a file that had been opened on another computer and get "invalid MS-DOS function".

  With a flash drive, I took a document to another computer with a version of Excel, I had never seen.  I then brought the document to my own computer, opened it and was missing the lines and columns headers.  I also tried to copy the file to my CD - RW and the message "invalid MS-DOS function".

  I think that you had better know what was the Excel program. and say to the people in the Forums of Excel when you repost here...

  Excel:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861099.aspx

  Forums help Excel at the link above

  They will help you with your questions Excel when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Dreamweaver CC 2015 offers to get the files that are not in my root folder

  Dreamweaver CC 2015 offers to get the files, but when I manually check the folder, where it shows some files during the synchronization process, there is nothing. Why?

  Clear your cache.

  Clear Cache corrupted in DW

  http://forums.Adobe.com/thread/494811

  Nancy O.

• How can I prevent the user to use a USB card to copy office files?

  How can I disable the use of USB drives on the computer

  Hello

  We have a very good document to http://support.microsoft.com/kb/823732

  I hope this helps.

• ABP is blocking content from Ticketmaster, I tried to turn it off but it doesn't. I use Ticketmaster on my iPod, so I know that the problem is with the help of PBA.

  Tried different options of disabling with no joy. Don't know what else to do

  Try to start Firefox in safe mode. If there is no problem, then while
  a course in Firefox > Modules and delete the PBA. Then restart
  FF. If there is still a problem, Ad-Block can be reinstalled.

  ======================================
  

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I have 12 FrameMaker files can I use FrameMaker 2015 to generate a PDF of older file?

  I have files created in FrameMaker 12.

  Can I use FrameMaker 2015 version to open the files and generate a PDF file?

  I get error when I try to do.

  I just want to know if it is possible or not.

  Thank you

  Alice

  Yes, it should be possible. What kind of error do you get?

  Open all files and save them as FM2015 versions first. If you have a book file, open all the files of the components before trying to create a PDF file. [Use the Shift key the shortcut in the file menu for the book to open all the files at once.]

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• Why can't I managed to install the iso file in my USB? I've tried different usb and hard drives and disassembled a lot or time usb but when, it comes up with an error copying the files on and it stops loading? What should I do?

  Why am I unable to download and copy iso files that need to go into the USB drive, it always comes up with an error when copying the installation files and none of the solutions have worked (some of the things I've tried are different from the USB, disassemble and repeat the download process windows files)

  You cannot use a simple USB as a source and destination. You must copy the ISO file (it's a single file, not the full installer) in your Documents folder and then run BCA to create a USB installation program. 2015 macs do not create a USB installation program.

  Please visit https://help.apple.com/bootcamp/assistant/6.0/ .

• Can I use easy to get my old C: files/settings transfer?

  My desktop XPSP3 is dead, but the hard drive is always good and is mounted in a USB enclosure attached to a new office with Windows 7 Home Premium. Can I use Easy Transfer on the new desktop to get my files and settings from the old drive XPSP3?  If so, how?  Thank you.

  No, you will need to copy them manually.

  You may need to take possession of some of the folders:

  Windows 7 take ownership & grant permissions to access files & folder

  To copy and paste a file:

  1. Open the location that contains the file you want to copy.

  2. Right click on the file and then click on copy.

  3. Open the location where you want to store the copy.

  4. Right-click on an empty space within the location and then click on paste. The copy of the original file is now stored in the new location.

  For more information about copying multiple files, see select multiple files or folders.

  Tips

  • Another way to copy and paste files is to use the keyboard shortcuts Ctrl + C (copy) and Ctrl + V (paste).

  • You can also press on and hold the right mouse button and drag the file to the new location. When you release the mouse button, click on copy here.

  • You can copy and paste a folder in the same way as you would a file. When you do this, all the files in the folder are also copied.

• Copy several files to the command prompt

  I want to create a batch file copy several files that I specified a directory and use a command once. but when I tried to 'copy file1 + file2 + file3 destDir', it copies only the first file. I do not copy all of the files or the files whose names share a model. If the wildcard characters * and? does not apply here. What should I do to copy several files?

  You probably want to use a command like this:
  for /f %i in (list.txt) can I copy/b %i destDir
  Where "list.txt" is a file that contains a list of the files that you want to copy and 'destDir' is the directory you want to copy.  If you put this line in a '.bat' file, you may need to replace each character "%" to "%".

  Or, if it's a short list of files, you could do something like:
  for %i in (file1, file2, File3) can I copy/b %i destDir

  HTH,
  JW

• Unable to copy the file when windows installation...

  I want to install window on my pc... but when step copy the file, that it has almost no...

  I try to use a different installation cd, but the same problem must out when copying files...

  someone help me please...

  IM sory for my bad English... :-)

  Check this thread: -.

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/0b5f9099-e934-4818-b2cc-41dd0edd3f13/

• "Are you sure you want to copy this file without its properties?" what adaptation .jpg files to thumbdrive.

  "Are you sure you want to copy this file without its properties?" what adaptation .jpg files to thumbdrive.

  Hello

  The USB drive is formatted in NTFS (New Technology File System) or FAT32 (File Allocation Table 32)?

  Windows stores the file on NTFS metadata using a feature called Alternate Data Streams. In other words, metadata is stored in an another 'stream' (an object file with a different identity system) as the stream that contains the file data. Since FAT32 does not support ADS, given in these alternative streams cannot be copied and will be lost if you continue copying.

  If you have all the data on the USB, then you can format the drive. If unsaved data then you must back up the data on the USB key on the hard disk of the computer, and then restore it after perform the format.

  Try formatting the USB drive to NTFS and check if the problem persists. To do this, follow these steps.

  a. Insert the key USB and go menu start, then computer.

  b. right-click on the USB key, and then click Format.

  c. under "File System", select "NTFS" and then click Start. Once the format is done, check if you can copy the files successfully.

  I hope this helps.