Windows 7 ultimate does not start

Similar Questions

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC. If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  When I try to start Dreamweaver CS6, I get a pop up window asking me to start a trial of CC.

  If I close that window, cs6 dreamweaver does not start as he did yesterday. What can I do?

  I webxite who has problems, and I get to him because I can't start Dreamweaver.

  Help! Help!

  If you bought it, you have the version under license.  You have not forever.

  Creative products of cloud is not the serial numbers.  You enable product Cloud by logging in with your Adobe ID and password.

  Nancy O.

• Windows Vista Ultimate does not install on Satellite M40

  Windows Vista Ultimate settles not on this laptop. Vista hangs after the installation and does not start. Someone knows what's the problem?

  Hello

  As mentioned above the hardware of the laptop must be compatible and must be able to manage the Vista. The M40 is certainly not Vista capable
  But I have installed Vista on the A50 and this laptop is no longer able to Vista but I upgraded the RAM and HARD drive and it works.
  Of course, the many features of Vista like Aero don t run but I was able to install it.

  Maybe the BIOS is not compatible with Vista! It is possible

• Windows Defender service does not start on Windows 7

  On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
  I can't remove Defender another upodate no longer works.

  Someone knows a solution?

  Hello

  Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

  In addition, you can read about trouble of Windows defender:

  http://support.Microsoft.com/kb/931849

• Mini laptop of HP 1000: mini windows laptop computer does not start

  My mini laptop from HP is saying windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can try to repay this file by starting windows setup installation CD using the original.

  Hi there @kgoen81

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you receive a message from a missing file, and that your system does not start. I'm happy to help you.

  First, I recommend that make you an external backup of data on the hard drive. There are several ways you can try to do that, but here is a page with a few possibilities:

  How to recover data from the hard drive to a laptop dead - eHow.com

  Also, please post the complete product and the operating system running on your laptop. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  For now I'll assume you have windows 8.

  Computer won't start (Windows 8)

  You can also visit this page, and in particular you want to go with the automatic repair options. I would try before using a full system recovery to an original image, on the previous page I linked.

  System - Boot of Windows 8 recovery options - eightforums.com

  I hope this helps.

• Clean install of windows xp, PC does not start Internet Explorer

  I did a clean install of windows xp, but my PC does not start under Internet explorer, nor can I install browser of my ISP with the drive, they gave me.

  I made a second clean install & noticed that the installation seems to ignore the part that asks about the connection to the internet. At this point, the command prompt screen flashes up & then closes. The installation continues her & ends.

  Can someone help me please?

  Good job; Yes!

  Your specs are here:
  https://support.Dell.com/support/eDOCS/systems/dimc521/en/SM_EN/specs.htm
  Since you have the video and audio embedded, download the drivers for which follows on a USB key:
  • Chipset (nVidia_SMBus_A02_R132919.exe)
  • graphics - on Board (driver nVidia: R133260.) (EXE)
  • audio - aboard (the SIGMATEL driver: R132395.) (EXE)
  • network, which will allow you to get online! -Broadcom driver: R149798. EXE

  Then download other files mentioned in my instructions (SP3, IE8, MSE) and go to town!

• Windows time service does not start

  When I try to start the time service Windows, I get a message:

  ------------------------------------------------------------------------------------------------------------

  Windows could not start the time Service Windows on the Local computer.

  Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter.  A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  ------------------------------------------------------------------------------------------------------------

  The service is listed in the services page and entered into the automatic start mode, but does not start.   I don't have any idea what to do next... Thank you

  To resolve this issue, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit.exe in the programs list.
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate the following registry subkey and click on it:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv
  3. In the details pane, right-click ImagePath, and then click Edit.
  4. In the value data box, type the following registry value, and then click OK:
     %SystemRoot%\System32\svchost.exe k NetworkService

     Note If NetworkService does not appear in the value of registry NetworkService %SystemRoot%\System32\svchost.exe - k, the problem that is described in the "Symptoms" section may occur.

  5. Exit the registry editor and restart the computer.

     Note If you try to start the telephony service before you restart the computer, you may receive the following error message:

     Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MY WINDOWS VISTA COMPUTER DOES NOT START AFTER CLOSING GAME?

  LAST NIGHT I WAS PLAYING THE GAME ON THE COMPUTER. THEN I TURNED OFF THE COMPUTER. THEN LATER WE I SWTICH IT ON AGAIN NOW IT DOES NOT START THERE FACT THAT HAPPING PLEASE SOMEONE CAN HELP ME THANKS

  What happens if you go in Mode safe?
  Screen opens in safe mode?

  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen.
  The top/down arrow and select Mode safe mode with command prompt.

  If you manage to logon in safe mode, follow these steps:

  1 do a system restore. Choose the date BEFORE you played the computer game, as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, click
  > Next > finish
  To sit and wait. The machine restarts when it's done.

  2 make a check of the file system. It's for search files corrupted and did try to fix them.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

• Windows Action Center does not start

  I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start.  Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.

  Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.

  I have Windows 7 Home premium sp1.

  I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.

  Is there any solution for this?

  It helped with my Action Center problem.

  http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved

  And this with the firewall.

  http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html

  Win 7 security 2012 was the virus.