Make a custom without black bars image format

Similar Questions

• Satellite U840W-10J - won't play DVD or blu - ray without black bars

  Hello Toshiba people friendly and helpful.

  Are you coming to my rescue once, but I fear it may be trickier.

  I have the joy of uber-beautiful widescreen which is a Satellite U840W - I want to use all of the 1792 x 21:9
  768 resolution for DVD / Blu - Ray. I use a Samsung Toshiba SE-506 as the Blu-ray/DVD, but I don't know what software to use.

  I used VLC and Powerlink DVD 10 software provided with the Blu - ray player, but so far, everything is not just the black border at the top and bottom, but it has also massively chunky black bordered on each side as well - certainly not what you want.

  The two pieces of software want to display at a resolution of 1024 x 768, which is why so much real estate is wasted.

  I got the impression of Toshiba that I would be able to use all the horizontal resolution and cut the top and the bottom - but no solution I found to this day allows.

  Interestingly, I tried to use Windows Media Player, but that does not even recognize that there is a DVD in the drive ready to play.

  Help me obi-wan-kenobis, you're my only hope for sanity.

  Thank you very much in advance
  Alan

  > I also finally has get blu - ray works.
  Great!
  I think you can also use the Windows Media Center (for W8n 8) but this part to win 8 must be purchased separately.
  http://forums.Toshiba.com/T5/general-features-knowledge-base/how-to-installing-Windows-Media-Center-in-Windows-8-for-DVD-and/Ta-p/375875

  > Also, no matter who ever got 9 hours autonomy of one of these computers yet? 6 hours, if you're lucky...
  The reference of the battery (Mobile Mark 2012) says that you can run Notepad on battery (4 cell battery) for about 5 h 15 min... Up to 6 hours is a good value for you.

• Black bar very annoying on the right side of the screen when you play

  Hello

  I have read this is a common problem, but it doesn't seem to be a solution that works with everyone.

  About 10% of the screen is just a black vertical bar, as if the screen has moved to the left 3 cm

  I have tried a few techniques I've read including the change resolution to 1024, then turn on full screen, wide mode then reset the resolution... has worked a few times, but remains when it is no more to do after every restart (what a pain)

  Anyone got a more permanent solution?

  

  I've found a workaround (posted by hp)

  The obvious solution is to get the latest version of the bios, choosing fixed instead of dynamic stick and just with the gpu on board

  I found the solution (no thanks to hp) for those who want their laptop to act like it's supposed to without resorting to workaround...

  which means to choose a dynamic transition and still play their favourie without black bars that blocked views

  in any case, credit when it is earned, a guy named kharn83

  Download drivers ATI 11.9 or 64 ones

  just install this driver from HP on top and restart...

  worked like a charm here...

• Remove black bars of social videos about Muse

  Hello

  How can I embed videos from youtube/vimeo without black bars appear above and below them? See screenshot...

  You must change the HTML that you insert into the page of the Muse, the links provided include the change in the code you need for video embed code.

  Thank you

  Sanjit

• How can I make a slide show in windows movie maker without being reduced image quality?

  I have recently created a slideshow with audio (songs) in windows movie maker, as I do not have powerpoint. When I read the production, the quality is perfect on the screen a small excerpt, but as soon as I open it full screen pictures are of very poor quality.

  Is it also the possibility to create this slideshow on a DVD format to burn to a disc and play in a DVD player (in the windows movie maker program and without having to create the DVD in another program).

  Thank you very much

  Tessa

  You post to the XP forum, so this info is for XP.

  The display resolution is reduced when we look at
  the Timeline/Storyboard...this will not affect your
  completed project (especially noticeable seen)
  full screen). If you view the item by selecting it in the
  Part of collections that better, he should look like.

  If your video file .wmv recorded are not resolution
  you need... you may need to use a custom profile:

  In Movie Maker... (assuming that your source files are high quality)
  You can increase the resolution of your video by slideshow
  using a custom profile when recording in .wmv movie format.

  Personally, I find the following .wmv profile to be
  useful when recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save as... drop in the following folder:
  Folder of C:\Program Maker\Shared\Profiles Movie

  If you do not have the profiles folder... you
  to create.

  In Movie Maker... the next time that you save a movie...
  Go to file / save movie file / show more choices.
  Other settings / open the window menu and choose...
  Slide show-1024x768WMV9

  More information:

  Creating custom profiles
  for Windows Movie Maker 2
  http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/CustomProfile.mspx

  Even more information
  Windows Movie Maker
  Custom export formats
  http://www.JakeLudington.com/project_studio/20050909_windows_movie_maker_custom_export_formats.html

  Also... the following forum maybe worth a visit:

  Film producers
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Now for the creation of a DVD-video...

  With the exception of the version of Windows Media Center
  XP there is no native option to create a video DVD. You will have
  need to acquire a DVD software for this task.

  The following freeware can help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  FWIW... the free Photo Story 3 is an also a great app
  to easily create video slideshows with music.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx
  (works on XP, Vista and Win7)

• When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  Could you check this thread started by another user of Linux and see if that helps:

  How can I stop firefox ffrom blocking URLS

• On the Firefox screen, where is the black bar below the Navigation toolbar that alloweded of the specific research in 'Shopping', 'Images', 'Video', 'News', etc. Now, it appears only after a search.

  If I remember correctly, old versions of Firefox had a black bar below the navigation bar on the opening screen that allowed specific searches for 'Images', 'News' 'Cards', 'Video', 'Shopping', etc.
  Now this bar only appears when a search has been performed.
  Is it possible to customize Firefox, so this appears on the logon screen.
  The bar does not have a toolbar name.

  Versions of Firefox 4 + use a new build-in home page named Subject: House with a Google search bar on this issue (no internet access required for the loading of this page).

  What about: home page only shows a few clips and has a button to restore the previous session, as appropriate.

  If you want a home with extras page, and then set a different page than the homepage like www.google.com as used in versions of Firefox 3 or on the iGoogle homepage ([www.google.com/ig]).

• My local dick V total space is 20 GB, I want to make my C drive space like 60 GB without Booting up or formatting

  Hello. I have windows 7 Ultimate. My hard dick is 160 GB. My local dick V total space is 20 GB, Local D 70 GB drive and dick Locak E 60 GB. Drive C is now totally complete. I want to make my C drive space like 60 GB without Booting up or formatting... I can do... ? Please help me out

  Hello. I have windows 7 Ultimate. My hard dick is 160 GB. My local dick V total space is 20 GB, Local D 70 GB drive and dick Locak E 60 GB. Drive C is now totally complete. I want to make my C drive space like 60 GB without Booting up or formatting... I can do... ? Please help me out

  That's how

  http://www.pcandtablet.com/Windows-7-General-Chat/217/in-my-Windows-7-Desktop-Windows-7-is-running-out-of-space-how-can-i-handle-this.html#post403

  on the other

  http://www.pcandtablet.com/Windows-7-General-Chat/236/although-i-have-enough-UN-partitioned-space-extend-volume-option-is-not-activated.html

• Cannot make the fx color correction without getting the image of strobe

  Cannot make the fx color correction or blur fx with masks without getting the image to strobe. Do not return in the sequence, or export without the video strobe effect. It is clearly a problem since at least 2011 because I saw some forum posts dating back that far. Don't know how or why it is always a question 5 years later. I have the correction color fx on an adjustment layer that makes very well. Leave color and blur fx on a couple of individual clips is whats creating the problem. Does anyone have a solution? It does not appear that I can wait for Adobe.

  At this point, I would create a sequence for each clip (in the garbage, make a right click, create sequence and apply the FX it) then replace the clips in the mixture with the sequences.  -Test this point by one before they go crazy.

  OR, using the idea of sequence preceding above, return on a new clip with holiday color applied to replace as new originals in the mixture.

  Third idea: replace the clips with linked AE comp and try the color of leave which are.

  In short, do what you can to take the color of leave out of the final equation.

• Monitors/Source program that displays a single vertical black bar on image

  I use first Pro CC, with all the latest updates etc.  I just started a new project, and I have a rather strange problem with the window the program monitor.  Essentially, when you view the final image, the last item in the order given, about 1/8 of the image on the right side in the program monitor window is obscured by a vertical black stripe.

  If for example, I put three clips in a sequence all on the same video track, but do not join them together (I purposely leave a space).  If I find the last frame of the first two clips, there is no problem, it is never the last frame of the sequence.

  If I find a clip in the Source monitor, the same black bar appears on the last frame of the clip seen in the same way as the program window.

  I'm baffled by this one.  I can't think any setting I have accidentally enabled which could even hint to this behavior.

  Final result is not compromised, by the way, watch just a clips as I work.

  The ideas people?

  Steve

  This is a new feature introduced in the last update.

  When the playback head past the last image of media on the Timeline, and after that, there is no cutting

  a black box appears along the right edge of the last frame of a clip or sequence.

  The end of support indicator is always on and appears for multimedia clips in the program monitor,

  The source monitor and the video area of the project Panel.

• Black bars above and below my images in the exported in MPEG and AVI video

  Hello.  This is my first time to be on this forum.  I made a video for the banquet of my grade 5 class which is TOMORROW NIGHT, .  My video looks awesome on the timeline, but when I export an MPEG or AVI, some images appear not to the top of the way they do on my calendar.  For example, many paintings have a black bar above and below the image that is not on my calendar first elements 11.  I pray that I can fix it because I'm willing to stay up ALL night to understand.  Everyone on here who can help me, pretty please?  Thank you!!

  Welcome to the forum.

  Black bars indicate a discrepancy between the size of the frame of the project and the Source of the images/photos.

  The answers to the questions of ATR will point upward where are these inadequacies.

  This article will go into detail on the causes and many of the corrections: http://forums.adobe.com/message/3797172#3797172

  Good luck and let us know more, by ATR questions, please.

  Hunt

• How to remove the black bars after image rotation

  I am very new to the use of first pro. I took a video with my smartphone like the contents of a project.  The original size is 1280 wide and 720high.  I imported the video and needed to rotate 90 degrees.   Instead of the scale I need tall. I imported and then under effects control - motion - rotation to rotate how I wanted.

  But now on the screen has black bars on the sides from the turn, and when I export the video basic settings is grayed out so I can't change it. It is game/set at 1280 x 720 with black bars.

  How can I remove the black side bars in first pro to fit the dimensions of the video shot recently?

  Great! I'm glad to hear it. Thank you for the presentation of reports. If you don't mind, please mark my answer as "Correct".

  The reason for which the clips were 56% was so that they would hold the frame of landscape size. Once they were they belonged, they were happy to 100%.

• How to make a standard DVD of still Images in the correct proportions on the DVD?

  The Premier Pro CC 2014 Apple MacBook Pro 10.10.5 DVD Superdrive Samsung PX2370 Dual monitors

  It comes to make a slideshow of lightroom still images on a standard DVD.

  If I choose:

  New project form - DV

  Preferences - Still Image duration - 30 seconds 3 pictures

  Export - MPEG2-DVD - DV NTSC 720 X 480 NTSC 29.97 STANDARD 4:3

  Time line report Correct Veritical Aspect full screen

  Program the Panel - Aspect Ratio Correct Horizontal black Bars

  Queue - MPEG2-DVD NTSC DV

  The sequence settings: unless the default scale image size is selected in the General preferences

  The image is very much out of proportion with or without zoom

  Tried several presets, that does not

  Scale to the size of the selected image

  New project created with all the settings above

  Including the default scale to the size of the image

  Image in the window of the program format is Correct

  The sequence presented without change settings

  Custom - 29, 97-3988 x 2649 pixel square progressive 29.97 Drop Frame

  Export settings - NTSC 720 x 480 widescreen

  Successful of the queue

  New project-DVD 720 x 480 29.97

  Import the Aspect Ratio of Correct time line

  Play DVDs on Mac - good reading of DVD on standard DVD player or Playstation

  Image format - incorrect image tool large horizontal black Bars

  Vertical - top of the picture cut off

  First of all, I'd do the widescreen dvd.

  I would like to start with a normal of 1920 x 1080 1.0 and progressive.

  Put all my photos (no scale to the size of the image) reduce manually to fit the screen or correct the composition.

  When finished exporting to mpeg2-dvd widescreen ntsc.

  Load the file in again and burn to dvd.

• Convert image format (from 1440 p, 1080 p)

  Hi all

  I use the trial of first CC (given to make the jump from FCPX). Guides to get started on the adobe site are great, but I'm having problems trying to find an answer to this question:

  I shot some footage in 1440 p (by mistake), I edited into a sequence I want, color graded it and put music to it. How do I crop it so that it becomes 1080 p. I used the cropping effect, but when I go to export it to the h.264 format it always exports like 1440 p but with black bars.

  Can anyone help? I would be eternally grateful

  Chris

  1440 has an aspect ratio of 1.33. This should also be in your sequence settings.

  1440 can be easily exported to 1080 with aspect ratio of 1.0.

  You can also drop 1440 images directly into a 1080 sequence, it will adapt automatically to the screen.

• Black bars ontop of video with 960 x 720, but not with 1280 x 720 (video 4:3)

  I am encode a video for youtube using parameters Grisetti and Cloudman suggests here:

  http://forums.Adobe.com/thread/623549?TSTART=0

  The results were great, even for my 4:3 videos.  However, by using the suggested settings to 1280 x 720 on my 4:3 videos, I realized that my Youtube videos have black side bars encoded in the video (which makes thumbnails of youtube have also their)

  What I want to do is to retain the settings, but re - encode my video 4:3 without sidebars.  Earlier, I have spend the setting to 960 x 720, it still looks good, but a little piece of black bar is added on the top and sides.  As mentioned, it does not top when encoding to 1280 x 720. No other settings are changed.

  Thank you much for the help!

  You encounter a discrepancy between the film Source of the layer and the project preset. This ARTICLE goes into detail.

  Now, for the ill-matched sequences, you can scale your clip on the Timeline, with the fixed effect > Motion > scale. Unfortunately, if we go just with scale to the size of the default image, the first suitable dimension, will leave others unanswered. You must manually increase the small Clips (will slightly degrade the image) and let the size of the frame of the project effectively of cultures. To set which is "cropped", you will want to use the fixed effect > Motion > Position.

  Good luck

  Hunt