Generic applications Java runs only within Jdeveloper, not at the command line

Similar Questions

• Query running Discoverer Desktop... via the command line

  Hello world
  
  Hope all is well,
  
  I learned how to operate the discoverer by using the command line.
  
  My question is:
  ===========
  When you connect manually in Discoverer, the values of parameters that were used last in the last series display when
  the query opens...
  
  When I run the command of discoverer line, I have to mention explicitly all parameter names and their values
  
  If I do not mention the settings, I get an error message: unresolve parameter...
  
  I would really like to run the command-line style WITHOUT mentioning query parameters and wish the discoverer of run
  the application with the default settings...
  
  Is this possible...
  
  Thx for your ideas and your advice, sandra

  Hello

  How parameters could be made optional in the Office?

  It can be made using desktop only, there is no functionality of optional parameters.
  If you have a single desktop, you will need to set the parameters in the command line.

  Tamir

• sample application is running on Simulator, but not on the device

  I created the 'Hello World' example and ran on the Simulator.  It works fine in there.  I used JavaLoader put the cod on my phone.  The icon is on the phone, but when I click it, nothing happens.  What I am doing wrong?

  JavaLoader gave me other errors.  So far, creating a files .alx file and installation with the Office appear to be more successful.  I think I'll use that in the future.

  Steven

• How can I run Firefox in mode 'privacy' from the command line?

  What is said.

  See also:

  • https://developer.Mozilla.org/Command_Line_Options

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• VMWare Player startup with the command line command does not work!

  Hello everyone,

  I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:

  I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command

  Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.

  with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).

  This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.

  P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".

  virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record

  ER VM Windows XP Pro SP3.vmx"

  Unable to connect to the host.

  Error: The specified version is not found

  P:\ & gt;

  I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.

  The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\

  Today suddenly wrong?

  Any help would be greatly appreciated.

  Thanks in advance to one that solves the Enigma.

  Hello

  Meine VMs starte ICH mit dem VMplayer so:

  vmplayer.exe _

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Start an application saved on the command line

  Hello

  first of all that I do not know how I can start my data .exe on the command line, I know that. I need a few more tips.

  My problem is that I start my program and set values in my interface and then I save my interface. You can say that I am creating some options with different parameters (option 1, option 2, option3). Now, I would like to open this option on the command line. So first of all the program begins with option1 when this option is over that option 2 should start (I will also create a handler of signals which gives me a feedback if the option before closing).

  It should be like this:
  Path\Application.exe option1 option2 option3

  But know that I have a problem. When I save my slab (SavePanelState) I can not open such a Panel is saved with the command "LoadPanel". In help, there is also information that you can load only such a panel with the RecallPanelState command, but with this command you only update the interface. Now my question is, how can I savel a panel with its States and call it with the command LoadPanel? Or is the only way to load a group of experts and to recall the values the command of RecallPanelState?

  Best regards

  Unortunately there is no way to directly open a control panel preconfigured with controls other than in their default state. You have already discovered it and I can confirm that this can not be changed. However, if you call LoadPanel and RecallPanelState front showing the Panel, that the user will directly see the Panel custom, which is more or less what you are looking for.

• Error running webworks create from the command line in Beta 2 of Webworks

  Hello

  I am creating a project of cordova webworks from the command line. I run the following command:

  WebWorks create f:\devroot\NEXT_GEN\MobileApp\WebWorks2\MyApp com.joe.myApp MyApp

  However, it fails with the following error message:

  {[Error: check incorrect header] errno:-3, code: "Z_DATA_ERROR"}

  It seems to me that its attempts to download a tar.gzip drop of github (url below), but this file does not exist:

  URL: https://git-wip-us.apache.org/repos/asf?p=cordova-app-hello-world.git;a=snapshot;h=v2.0.0.54;sf=tgz

  So I'm not sure that my project directory is set up correctly. What is contained in this folder which its trying to find in the remote repository and is it relevant to my application?

  I can see my project directory in the space provided. It contains the following folders:

  ".cordova', 'merge', 'platforms', 'plugins' and 'www '.

  ".cordova" contains a subfolder 'hooks' which, in turn, contains about 24 cases being with 'after' or 'before' (e.g.after_build, before_build), it seems to be empty. It also contains a config.json that contains the attributes id and name of the project. Do any other necessary information in config.json?

  All other folders are empty.

  Is any other thing missing? should there be a config.xml file created for me in the directory "www" for example?

  Just add a config.xml file myself? Y at - it information about the correct structure for the config.xml file in webworks 2.0?

  Thank you

  Joe

  Hey Joe,

  So, just to confirm, HOST = "C:\". "and USERPROFILE ="C:\Users\?

  This is useful. Normally Windows machines do not have a HOME environment variable.

  We must ensure that these files copied to %USERPROFILE%\.cordova\lib\www\cordova\v2.0.0.54

  Please try this patch to webworks-cli/lib/utils/utils.js:

      findHomePath : function () {
          return process.env[(process.platform === 'win32') ? 'USERPROFILE' : 'HOME'];
      },
  

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Windows 7 does not recognize 'change' in the command line

  When you use the command line I try to go to edit to create and edit files, but windows 7 is not recongize edit as a command internal or external, why and how do to the command line editing window.

  The 64 bit version of Windows 7 is not the editprogram (but the 32-bit version only).

  You can run Notepad from the command line.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Error trying to run load test on OATS by using the command line

  Get the trial below the error message when you attempt to run the command line to start the OATS.

  log4j: WARN no appenders could be found for logger (oracle.oats.server.jndi.JndiL
  ookup).
  log4j: WARN Please initialize log4j correctly system.
  log4j: WARN see http://logging.apache.org/log4j/1.2/faq.html#noconfig to learn more
  FO.
  Error of initialization of the connection of the controller of t3://rws21410019.us.oracle.com:8088/
  weblogic\n\n (message id = ctl.initError)
  oracle.oats.client.controller.ControllerException: initialization of the error controller
  connection to t3://rws21410019.us.oracle.com:8088/weblogic\n\n (message id = ctl.i
  nitError)
  to oracle.oats.app.controller.client.ControllerClient.initController (Con
  trollerClient.java:268)
  to oracle.oats.app.controller.client.ControllerSyncedClient. < init > (control
  ollerSyncedClient.java:137)
  to oracle.oats.app.controller.client.OltCommandLine. < init > (OltCommandLin
  e.Java:43)
  at oracle.oats.client.CommandLine.initController(CommandLine.java:748)
  at oracle.oats.client.CommandLine.run(CommandLine.java:179)
  at oracle.oats.client.CommandLine.main(CommandLine.java:61)
  Related: javax.naming.AuthenticationException [root exception is java.lang.Sec
  [urityException: user: weblogic, could not be authenticated.]
  to weblogic.jndi.internal.ExceptionTranslator.toNamingException (Exceptio
  nTranslator.java:42)
  at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException (WLIni
  tialContextFactoryDelegate.java:788)
  at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject (WLInitialCo
  ntextFactoryDelegate.java:682)
  at weblogic.jndi.WLInitialContextFactoryDelegate.newContext (WLInitialCon
  textFactoryDelegate.java:469)
  at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext (WLIni
  tialContextFactoryDelegate.java:376)
  at weblogic.jndi.Environment.getContext(Environment.java:315)
  at weblogic.jndi.Environment.getContext(Environment.java:285)
  at weblogic.jndi.WLInitialContextFactory.getInitialContext (WLInitialCont
  extFactory.java:117)
  at javax.naming.spi.NamingManager.getInitialContext (unknown Source)
  at javax.naming.InitialContext.getDefaultInitCtx (unknown Source)
  at javax.naming.InitialContext.init (unknown Source)
  to javax.naming.InitialContext. < init >(Unknown Source)
  at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal (exercise
  WN Source)
  at oracle.oats.server.jndi.JndiLookup.createInitialContext (unknown source
  (e)
  at oracle.oats.server.jndi.JndiLookup.createInitialContext (unknown source
  (e)
  at oracle.oats.app.session.SessionClient.initSession(SessionClient.java:)
  104)
  to oracle.oats.app.controller.client.ControllerClient.initController (Con
  trollerClient.java:262)
  ... 5 more
  Caused by: java.lang.SecurityException: user: weblogic, couldn't be Authenticate
  Ed.
  at weblogic.common.internal.RMIBootServiceImpl.authenticate (RMIBootServi
  ceImpl.java:116)
  at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke (unknown Sou
  NCE)
  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)
  to weblogic.security.acl.internal.AuthenticatedSubject.doAs (Authenticate
  dSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:)
  146.)
  at weblogic.rmi.internal.BasicServerRef.handleRequest (BasicServerRef.jav
  one: 518)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run (WLSExecuteRequest.jav
  one: 118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Please make sure that the BTA server is running!

  Thank you

  This problem has been resolved after changing the user name for "oats", this is the user name of the weblogic server and not the console of OATS.

• sqlplus connects well with SID on the command line, but not with setora

  I can connect to my database using sqlplus if I specify the SID on the command line; However, I get an error if I try to connect after using setora to set the SID. Any ideas on why this is happening?
  
  Oracle version is 10.2.4.0
  OS is SunOS 5.9 Generic_122300-46 sun4u sparc SUNW, Sun-Fire-V490
  MYDB resides on a host machine that is different from the one where I'm under sqlplus. We'll call this REMOTEHOST machine.
  I am sure that MYDB is running on REMOTEHOST
  

  MYUSER@MYHOST% setora MYDB
  MYUSER@MYHOST% sqlplus MYUSER
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 8 09:38:58 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  Enter password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 Error: 2: No such file or directory
  
  
  Enter user-name: ^C^C
  MYUSER@MYHOST% sqlplus MYUSER@MYDB
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 8 09:39:10 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  Enter password:
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> quit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options

  Oracle environment variables:
  

  MYUSER@MYHOST% env | grep -i ora
  PATH=/u01/home/bin:/u01/app/oracle/product/10.2.0/OPatch:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/lib/cobol/bin:/usr/ccs/bin:/opt/SUNWspro/bin:/banvol/uncg/bin:/etc:/usr/openwin/bin:/opt/hsqr/ora/bin:/opt/hsqr/jre/jre141/bin:/u01/app/oracle/product/10.2.0/bin
  SQRDIR=/opt/hsqr/ora/bin
  LD_LIBRARY_PATH=/usr/ccs/lib:/opt/lib/cobol/lib:/opt/SUNWspro/lib/v9:/opt/SUNWspro/lib/v9:/opt/SUNWspro/lib:/u01/app/oracle/product/10.2.0/lib:/opt/hsqr/ora/bin:/opt/hsqr/jre/jre141/lib/sparce/native_threads:/opt/hsqr/jre/jre141/lib/sparc/client:/opt/hsqr/jre/jre141/lib/sparc:/u01/app/oracle/product/10.2.0/lib32
  ORACLE_BASE=/u01/app/oracle
  ORABIN=/u01/home/bin
  OWB_HOME=/u01/app/oracle/product/owb102
  ORACLE_SID=MYDB
  ORACLE_HOME=/u01/app/oracle/product/10.2.0

  TNSNAMES entry:

  MYDB =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = REMOTEHOST)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = MYDB.MYDOMAIN.COM)
      )
    )

  TWO_TASK = MYDB
  Export TWO_TASK

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.