genuine xp disc showing counterfeit

Similar Questions

• Cleaning my disc shows a window saying Windows has encountered a problem and needs to close HELP!

  My computer works fine, but when I try to lift the cleaning disc, I get the window saying: Windows has encountered a problem and needs to close. Please help me.

  1. http://support.Microsoft.com/kb/823302 
     The disk cleanup tool stops responding
  2. http://support.Microsoft.com/kb/812248 
     The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

• No disc shows during the installation of windows 7

  Hey guys help me I install windows 7 genuine dvd and selected partition 4, 182 GB after awhile its stuck at 94% for 1 hours and I pressed powerbutton forcely to close the facility. After that I chose to install my windows bootable USB windows to start the installation and I see this error "' no device driver signed were sure that found.make..". " After that, I click on browse 2 removable disk are disclosed, cd drive and boot in which windows a few files are installed. Please help me I want to lose my hardrive. I lost my drivers cd but I can download them from the net.

  I also tried to install windows 7 on dvd but I get the same error. See the screenshots of error http://s1339.photobucket.com/user/anmolhiraaap/library/?view=recent&page=1

  Hello

  It may be that the partition on the HDD is already damaged or the hard drive itself is defective. We suggest to contact your computer manufacturer for assistance.

  Thank you

• Copy genuine windows 7 shows now not authentic.

  I have a genuine copy of Windows 7 Home Premium on my laptop.

  I got this through a student in 2009 while I was at University. Now, I get a message pops up telling me that I don't have a genuine copy of Windows 7. If I try to go the the installation process of the program, it wants to install it then fails and just says error, very well.

  So, I then tried to use the link "Contact us" on the microsoft Web site. Since he thinks that I don't have a genuine copy of windows 7, he wants me to pay £46 just to have someone to email, err jog on.

  So I now find myself here ask for help in how I can solve this problem.

  Please please please help me before I end up breaking this laptop and spend a fortune on a Mac.

  The files do not match above, peut I copy my old hard drive or is - not a possible solution?

  
  
  I don't think so. Try WGA support and see if they can help.

  North America: http://support.microsoft.com/contactus/cu_sc_genadv_master?ws=support&ws=support#tab4

  Outside of North America:

  http://support.Microsoft.com/contactus/?ws=support#TAB0

• Adobe Creative Suite 4 disc shows not all applications Setup

  I am using Creative Suite 4 (Web Premium). I had a license error that (apparently) required me to reinstall my Adobe Illustrator. So I uninstalled all of my Adobe (except Acrobat, I bought separately) products.

  Now when I go to reinstall using the diskette, none of the 'core' applications (Illustrator, Photoshop, Dreamweaver) appear under the heading "Available products" to install!

  I tried a lot of different things, including installing in safe mode.

  Anyone have any ideas?

  You can dl the Setup files or you copy files from your drive to a desktop directory.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• a separate album multi disc set

  I can't for the life of me, see why a created disc multi disc shows separately for the album.

  This is the Portrait of Dan Fogelberg, 4 CD set. I did read the information and changed the orinal separated from 4 albums at all with the same name.

  Deleted "Disc X" in the title of the album. So disks 1,3,4 now appear under an album for the album, but disk 2 shows upward in a separate album.

  What's funny, is that if I go to the windows folder, the MP3 from all 4 disks are in the same folder. Watched a lot of attributes through windows Explorer

  and they all seem compatible. I also did the same Album artist for all. Any other ideas? I even deleted and ripped out again to see if that would clean things up.

  Im running the latest update of iTunes in Windows 7, if that matters,

  Thanks for all the ideas.

  I had a similar problem recently... try to remove the title of the album of all disks, so you get the artist with the unknown album, then readd the title of the album.  Worked for me

• Burn to disc

  When I burn a certain number of tracks, then select AUDIO CD the disc doesn't play in any player cd and when open in windows media player the disc shows no content.

  You need finalize the CD

  See you soon
  Jerry

• Connection problem: two discs instead of one

  Hi all. I have a new Sansa Clip + 8 GB (firmware: V201.01.05F). I intend to improve it with a 32 GB microSDHC card. For now I have filled the internal memory with MP3 files. USB is set to MSC mode. Everything was perfect, he has appeared as a disk with a folder for internal memory, and I like the characteristic sound. But after connecting to my computer (Windows XP) the second time, Windows was reinstall a new driver. This time there were two discs, J, and K, cried for a disc is loaded after double click: apparently the external memory that is not yet installed. The other disc showed some system files and the folder music. I was shocked to find it empty. But always the properties of the drive is almost full. So I have no access to the music files more. They play very much by the player, however. And a downloaded file has been accepted (shown as the only file in the music folder now) and can be read in the drive.

  I tried to reset to factory settings, nothing helped. I uninstalled the USB drivers several times, but the next Windows installations again lead to the same result.

  So what is happening here? Does anyone have an explanation and a solution?

  I was considering a formatting of the Clip + (via its menu), but it doesn't look too promising now. I was able to delete the folder music, probably a reload following music files would be recognized by Windows can. But I don't think that the present state is normal anyway: according to the QuickStart Guide there must be a disc with (for now) a folder it contains, as described above. I must also stress that the player doesn't have to behave normal after the question: it started with setting menu several times instead of the last title of the music. At least it seems fixed now.

  PSG vs MSC

• PS4000 - new slave showing by car, not online

  Hello

  I have a PS4000, model 70-0120, with 16 discs. A walk (14) entered into alert and supposed to replace. We have replaced the ST3500320NS (500 GB) with a ST31000340NS (1 TB) and everything looked good. Once I entered the web console, I see the disc shows alternative instead of in line.

  When all the disks were healthy, they all show online and none were marked alternative. Shouldn't the new drive show online? Is there something I need to do?

  Thank you very much.

  RAID5 will have at least a spare part, there is no policy of EQL RAID5 allowing without spare parts.

  Yes, when a drive goes down, for example the disk 5.   The hot spare will take his place and when you replace the 5 disk, which will become the new spare wheel.  Which slot is the spare wheel is not important.

• PROBLEM READING DVD DISC

  Hey everybody I really need help...
  I have Pavilion dv4 and my hard drive is HP DVDRAM gt30l and I ran a fixit and it has detected a problem with my hard drive which
  "The drive is empty, or the media format is not supported"... it started a few months ago...
  At first my laptop ran entirely and it was great to use, suddenly it stopped reading blue disks. He showed that the disc is empty and the pop-up came from a blank disc for example burn disc, how to use a blank disc, the disc showed 4.83 free GB to 4.83 GB blah blah blah... so I was looking for this fix a lot but unfortunately I found no help. Please help me!
  Thank you
  -David Sindy

  Hey Arnold.

  Go ahead run the Microsoft Fixit tool. I have a lot of success with it here on the forum. Here is the link: http://goo.gl/mmKWz

  Let me know if this or does not resolve the problem.

  Thank you!
  Sean

• A strange question Windows Update (Vista HP x 64)

  I need assistance with a strange:

  My system:
  HP Pavilion Elite d5200t ATX PC
  -Genuine Windows Vista Home Premium with Service Pack 1 (64-bit) digital cable tuner
  -Processor of Intel (r) Core 2 Quad Q9400 [2,66 GHz]
  -4 GB DDR2 800 MHz dual channel SDRAM [4 x 1024]
  -Hard drive 500 GB 7200 RPM SATA 3 Gb/s
  -768 MB NVIDIA GeForce 9600GS [DVI, HDMI, VGA]
  -Drive Blu - ray & DVD SuperMulti Lightscribe drive
  -Port LAN on motherboard (10/100/1000Base-T), wireless
  -15-in-1 memory card reader, USB 2, 1394, audio, video (for TV Tuner)
  -ATI TV Wonder external cable digital tuner + TV tuner internal

  After a few months everything works well, the other day, I could no longer use "Windows Update", which failed with various error codes.  (Will post a final later with update log because I'm away from the computer at the moment.)  However, I'm looking for a general hypothisis here, not a specific solution.  So Far, in any case.)

  So I tried all the usual remedies, stop services, rename files as C:\Windows\SoftwareDistribution, restart services, re-register all Windows Update DLLs, no joy.

  Try restoring the system to a point where I know that updates were working.  No joy.

  OK, I have a disk image (Macrium Reflect) which will restore all (including the MBR) up to a point where I know the updates have worked.  Reformat the active partition, restore disk image including image MBR, Windows update STILL does not work.  Of course Windows Defender does not update definitions either because it uses the update services.

  Then, I tried a complete restoration of the partition of the hard disk system restore then system restore disks.  Don't agree.

  So HOW IS THIS POSSIBLE?  Restore the PC with a system restore disc image disc not back to the point where Windows Update works?  What is the assumption here?  What type of virus/spyware could survive a restore disk sector by sector, including the MBR?

  Is there some sort of a BIOS virus that could do this?

  What are the possibilities here?

  As I said I can post newspapers and specific error codes, but I tried all the solutions, I found online for these codes (and others) without success, until I'm looking for a general assumption of what kind of trouble could survive the new image and restore.
  
  I have disabled all virus, firewall, etc.  I've even around my router directly connected to the cable modem.  I ran hardware tests, no problem.  There is the HP Advisor software that is currently running, but he was executed before the start of the original system and at the time where I saved the disk image, and it does not interfere with Windows Update then.

  Add information - I ran at least 5 different virus/spyware packages to see if there is no virus/rootkits etc. detected and everyone was negative.

  Any ideas?

  Thank you

  John

  Hi John94062,

  Thanks for the posts on the community forum.

  Reading this post the words "datastor" was what initially was out of me.  For now, however, each log placed in this thread of community reflects a date and data which seem to be some time long ago in the past.  The first was 27/03/09 and the second shows 16/04/09.  In my opinion, he must make a good backup, a clean format and reinstall - without using any Marcurim or any other image software needs to be done.  I also recommend taking off from USB keys or any other external media, as this takes place. Reinstall using the true authentic Windows discs.

  John94062, the image stands out as if it keeps the installation that causes the error.

  Be sure to have all disks in Windows, all product keys and all the software manufacturers, third-party CD/Media and their product keys before proceeding with this action and all data and important files backed up on external media before performing this action.

  Also, if you use a HARDWARE RAID configuration, be sure to check with your hardware vendor for any band perforated or any error causing corruption data.  Those that can be replicated to the backup.

  I know that it is stated that a new facility took place, but the dates don't seem to reflect a clean install.  After installation, backups that are restored on the system may have a bad file that can replicate itself on the system so try all updates with only the operating system on the System and before you install other software or backup on the system after the CLEAN install.

  Sounds drastic, but something is not reflecting more correct when all dates appear as some time before that happens the clean install.  We will therefore try a Clean format and reinstall using the genuine Microsoft discs, and not just any what imaging software then try the updates only to the operating system on the system.  Let us know if the updates install then.  If they then this is something which is being restored from the backup, you can restore a data segment at a time until the culprit is isolated.

  Please let us know if this helps you or if assistance is needed.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 10 could act as a Windows 7 virus, re - install?

  OK, so I decided to download 10 Windows on a netbook.  I had not had the upgrade icon but installed from iso as an upgrade, just to see how it worked.  Stupid mistake that even if everything has worked it have no driver Intel GMA 3600 available (and apparently never will be).  I tried to install the driver of Windows 7 and the netbook crashed and got into a loop.  So I decided to clean install Windows 11 and if Microsoft has found a driver.  Second stupid mistake!  After agreeing that 10 Windows wasn't going to work, I went to reinstall Windows 7 from recovery and system image disks.  I'm on my third attempt of resettlement now, but whenever I can't do Windows updates.  Error code says something is blocking the first internet time and this could be a virus.  I ran malwarebytes and nothing there.  Last time I installed Norton 360 before windows updates, and it immediately came up with a notification that there is a server proxy is configured on the laptop and if I had not, it could be caused by a virus.  This was directly after installed a recovery disc cleaning.  Ran malwarebytes and nothing here again.  Virus checked all my cards sd and usb keys and nothing there either.

  So something is like a virus and crashes me to the Windows updates.  Windows 7 Starter is enabled - no problem - they are genuine recovery discs purchased from the manufacturer.

  All I can think is that having had 10 Windows on the netbook is somehow preventing the updates of Windows 7 - and acting like a virus - is this possible?  If so, it must be in the bios, because I wiped the disk before reinstalling Windows 7.  Any help would be appreciated.  I'm looking for just a third installation, this time of recovery discs again, without installing the old image of the system later and try to update from scratch.

  Even if it's Windows 7 Starter, I have an Anytime Upgrade to Windows 7 Home Premium, which is how I was able to upgrade to Windows 10.  I tried to run updates of Windows before and after you have reinstalled the Anytime upgrade and it makes no difference.  Windows Update updates itself to the current agent, then stuck in research, then displays a red cross.  I tried the fix from microsoft and it comes up with the error the internet blocks Windows update - which it isn't - internet access is very good - we have two other laptops in the House and on top of that I am able to download programs on the netbook - the only thing that doesn't work is Windows Update.  I also tried to install IE10 direct download (recovery discs come with IE9) in cases that made a difference, but it didn't.  Basically there's something blocking the Windows updates on this machine and something can have set up a proxy (although nothing showing).  I wiped the disk between each installation.

  Related courses, discussion continues here: http://answers.microsoft.com/thread/8ec2e9ac-02a1-49b8-963b-16caa21630b8

• My inner smartdrive dvd player won't read DVDs more.  I have updated to Snow Leopard in Yosemite.

  I am currently using OS X Yosemite 10.10.5.  I bought in 2009 iMac with Snow Leopard and have to Lion then updated my current operating system.  The internal dvd player has worked with much fussing, (insert the disc - closing - turn after a wait - by pushing the drive when he jumped on reboot).  If I had the chance after a few hours, the video disc show up on my desk.  When this happened, I was opening the dvd player that was in the Finder and the disc would play. I also tried to open the dvd first player and then insert the disc.  That no longer works.  Yesterday, only it just stop working.  The reader still takes dvd and swirls and click as before but then ejects the dvd. Repeatedly stop and restart is no longer works.  I make sure that the dvd be clean before I use it and have tried many different DVDs without success.  I think it's a software issue.  Does anyone have an idea/instructions a nearly dead grandmother brain that can follow to update or redate back to original factory setting to help this poor Smartdrive not so smart?

  I have no TV, only my computer and phone at low prices.  I need to watch that my library borrowed from the dvd.

  Thank you.

  Try a cleaning CD/DVD

  You can also try to clean by:

  How to clean a Superdrive DVD using a credit card!

  I suspect the optical drive has failed. My 2009 Mac Mini could not shoot with same symptom 4 years ago.

  To confirm a drive failure, insert a Snow Leopard installation DVD and try to start with the C key.

  If this isn't the case, they drive could not be started.

  I would just get an external optical drive, one powered with an AC adapter. The Superdrive Apple USB does not work without a hack.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of Intel iMac or another appropriate forum.

• Use WD - NAS (MyCloud) with OSX Server Time Machine

  Hello

  Mounted a my WD-MyCloud-SIN AFP share to the TM server on OSX Server (latest version). Unfortunately, the disc shows up with no KB for backup and even if I choose this server/sharing, backup TM does end with mistake almost immediately. OSX used on the server and the Client is 10.11 (El Capitan) with the latest patches/updates.

  Someone at - it an idea if this combo is supposed to work (if so, how)?

  TKS in advance for your help

  Uwe

  http://pondini.org/TM/2.html

  Scroll down to the pink box.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.